![]() |
Hi,
I have problem sending multipage fax. I am using Linuxant driver under Ubuntu 7.10. The thing is that the first page pass through and is printed but then RECEIVE AGAIN shows on target machine (Canon FAX-270S) and the job send log looks like this:
Apr 21 19:01:44.76: [13394]: SEND send frame number 233 Apr 21 19:01:44.76: [13394]: <-- [9:AT+FRS=3D7\r] Apr 21 19:01:44.90: [13394]: --> [2:OK] Apr 21 19:01:44.90: [13394]: <-- [10:AT+FTM=3D96\r] Apr 21 19:01:45.22: [13394]: --> [7:CONNECT] Apr 21 19:02:38.16: [13394]: --> [2:OK] Apr 21 19:02:38.16: [13394]: <-- [9:AT+FTS=3D7\r] Apr 21 19:02:38.32: [13394]: --> [2:OK] Apr 21 19:02:38.32: [13394]: <-- [9:AT+FTH=3D3\r] Apr 21 19:02:38.36: [13394]: --> [7:CONNECT] Apr 21 19:02:39.73: [13394]: --> [2:OK] Apr 21 19:02:39.73: [13394]: SEND send PPS (partial page signal) Apr 21 19:02:39.73: [13394]: SEND send MPS (more pages, same document) Apr 21 19:02:39.73: [13394]: <-- [9:AT+FRH=3D3\r] Apr 21 19:02:39.89: [13394]: --> [7:CONNECT] Apr 21 19:02:40.02: [13394]: --> [5:ERROR] Apr 21 19:02:40.02: [13394]: MODEM Command error Apr 21 19:02:40.02: [13394]: FCS error
I have googled a lot but I did not find any solution yet. I tried to use class 1 and 1.0, with or without ECM, at lowest resolution but without success. I appreciate any hint (bad drivers, forget the softmodem, etc... ). From the log I can see that there is also some problem with the command description e.g [9:AT+FTH=3D3\r] should be [9:AT+FTH=3\r].
-- *Lee Howard* *Mainpine, Inc. Support Manager* Tel: +1 866 363 6680 ext 4 | Fax: +1 360 462 8160 lee.howard@xxxxxxxxxxxx | www.mainpine.com
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*