HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] failure sending second page (Linuxant HSF, class 1.0)



Hi,
  I have problem sending multipage fax. I am using Linuxant driver under Ubuntu 7.10. The thing is that the first page pass through and is printed but then RECEIVE AGAIN shows on target machine (Canon FAX-270S) and the job send log looks like this:

Apr 21 19:01:44.76: [13394]: SEND send frame number 233
Apr 21 19:01:44.76: [13394]: <-- [9:AT+FRS=3D7\r]
Apr 21 19:01:44.90: [13394]: --> [2:OK]
Apr 21 19:01:44.90: [13394]: <-- [10:AT+FTM=3D96\r]
Apr 21 19:01:45.22: [13394]: --> [7:CONNECT]
Apr 21 19:02:38.16: [13394]: --> [2:OK]
Apr 21 19:02:38.16: [13394]: <-- [9:AT+FTS=3D7\r]
Apr 21 19:02:38.32: [13394]: --> [2:OK]
Apr 21 19:02:38.32: [13394]: <-- [9:AT+FTH=3D3\r]
Apr 21 19:02:38.36: [13394]: --> [7:CONNECT]
Apr 21 19:02:39.73: [13394]: --> [2:OK]
Apr 21 19:02:39.73: [13394]: SEND send PPS (partial page signal)
Apr 21 19:02:39.73: [13394]: SEND send MPS (more pages, same document)
Apr 21 19:02:39.73: [13394]: <-- [9:AT+FRH=3D3\r]
Apr 21 19:02:39.89: [13394]: --> [7:CONNECT]
Apr 21 19:02:40.02: [13394]: --> [5:ERROR]
Apr 21 19:02:40.02: [13394]: MODEM Command error
Apr 21 19:02:40.02: [13394]: FCS error

I have googled a lot but I did not find any solution yet. I tried to use class 1 and 1.0, with or without ECM, at lowest resolution but without success. I appreciate any hint (bad drivers, forget the softmodem, etc... ). From the log I can see that there is also some problem with the command description e.g [9:AT+FTH=3D3\r] should be [9:AT+FTH=3\r].

Regards,
  Dusan Mamrilla



Project hosted by iFAX Solutions