Re: [hylafax-users] Missing EOL after 5 seconds (section 3.2/T.4)

[longbow <longbow@xxxxxx>]

hi lee!

here is the log:

Apr 21 17:19:11.85: [  809]: SESSION BEGIN 000001220 xxxxxxxxxxxxxxx
Apr 21 17:19:11.85: [  809]: HylaFAX (tm) Version 4.3.0
Apr 21 17:19:11.85: [  809]: MODEM set XON/XOFF/FLUSH: input ignored, 
output disabled
Apr 21 17:19:11.85: [  809]: <-- [13:AT+FCLASS=1A\r]
Apr 21 17:19:17.04: [  809]: --> [7:CONNECT]
Apr 21 17:19:17.04: [  809]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Apr 21 17:19:17.04: [  809]: RECV FAX: begin
Apr 21 17:19:17.04: [  809]: <-- data [32]
Apr 21 17:19:17.04: [  809]: <-- data [2]
Apr 21 17:19:17.20: [  809]: --> [7:CONNECT]
Apr 21 17:19:17.21: [  809]: <-- data [23]
Apr 21 17:19:17.21: [  809]: <-- data [2]
Apr 21 17:19:17.93: [  809]: --> [7:CONNECT]
Apr 21 17:19:17.93: [  809]: <-- data [13]
Apr 21 17:19:17.93: [  809]: <-- data [2]
Apr 21 17:19:20.19: [  809]: --> [2:OK]
Apr 21 17:19:20.19: [  809]: <-- [9:AT+FRH=3\r]
Apr 21 17:19:20.60: [  809]: --> [7:CONNECT]
Apr 21 17:19:22.21: [  809]: --> [2:OK]
Apr 21 17:19:22.21: [  809]: REMOTE TSI ""
Apr 21 17:19:22.21: [  809]: <-- [9:AT+FRH=3\r]
Apr 21 17:19:22.22: [  809]: --> [7:CONNECT]
Apr 21 17:19:22.50: [  809]: --> [2:OK]
Apr 21 17:19:22.50: [  809]: REMOTE wants 14400 bit/s
Apr 21 17:19:22.50: [  809]: REMOTE wants A4 page width (215 mm)
Apr 21 17:19:22.51: [  809]: REMOTE wants unlimited page length
Apr 21 17:19:22.51: [  809]: REMOTE wants 7.7 line/mm
Apr 21 17:19:22.51: [  809]: REMOTE wants 2-D MMR
Apr 21 17:19:22.51: [  809]: REMOTE wants T.30 Annex A, 256-byte ECM
Apr 21 17:19:22.51: [  809]: RECV training at v.17 14400 bit/s
Apr 21 17:19:22.51: [  809]: MODEM set XON/XOFF/DRAIN: input ignored, 
output generated
Apr 21 17:19:22.51: [  809]: <-- [11:AT+FRM=145\r]
Apr 21 17:19:24.20: [  809]: --> [7:CONNECT]
Apr 21 17:19:25.76: [  809]: MODEM set XON/XOFF/DRAIN: input ignored, 
output disabled
Apr 21 17:19:25.76: [  809]: RECV: TCF 2811 bytes, 3% non-zero, 2702 
zero-run
Apr 21 17:19:25.76: [  809]: --> [10:NO CARRIER]
Apr 21 17:19:25.76: [  809]: DELAY 70 ms
Apr 21 17:19:25.84: [  809]: TRAINING succeeded
Apr 21 17:19:25.84: [  809]: <-- [9:AT+FTH=3\r]
Apr 21 17:19:26.03: [  809]: --> [7:CONNECT]
Apr 21 17:19:26.03: [  809]: <-- data [3]
Apr 21 17:19:26.03: [  809]: <-- data [2]
Apr 21 17:19:27.21: [  809]: --> [2:OK]
Apr 21 17:19:27.21: [  809]: <-- [11:AT+FRM=146\r]
Apr 21 17:19:27.90: [  809]: --> [7:CONNECT]
Apr 21 17:19:27.90: [  809]: MODEM input buffering enabled
Apr 21 17:19:27.90: [  809]: MODEM set XON/XOFF/FLUSH: input ignored, 
output generated
Apr 21 17:19:30.75: [  809]: RECV received frame number 0
Apr 21 17:25:21.27: [  809]: CLOSE /dev/ttyS0


as you can see there is no input for about 6 minutes. so i closed 
hylafax and the ttyS0 connection.

greets
wolfgang

Lee Howard wrote:
> longbow wrote:
> > switching to class1 brings me more problems. when reveiving a fax i 
> > gwt only this message:
> >
> > Apr 21 17:32:56 area52 FaxGetty[24278]: --> [4:RING]
> > Apr 21 17:33:01 area52 FaxGetty[24278]: --> [4:RING]
> > Apr 21 17:33:06 area52 FaxGetty[24278]: --> [4:RING]
> > Apr 21 17:33:12 area52 FaxGetty[24278]: ANSWER: FAX CONNECTION  DEVICE 
> > '/dev/ttyS0'
> >
> >
> > but nothing more...
> > is there anything else i can do?? has anyone a working (class 1) 
> > config with the same fax i have (U.S. ROBOTICS 56K FAX)??
>
> What does the session log (/var/spool/hylafax/log/____) say?
>
> Thanks,
>
> Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*