[hylafax-users] BUSY error

[liberomic <liberomic@xxxxxxxxx>]

Hi,
I sent a fax to two different fax server which is a Enserver and the
other is Zetafax.

I use conexant Modem whith driver (linuxant) and Hylafax hylafax 4.3.4-1

For Enserver on analogue line (successful Send)
mar 17 22:12:00.02: [ 3079]: --> [2:OK]
mar 17 22:12:00.02: [ 3079]: SEND FAX (000000006): FROM root@localhost
TO NUMBER (docq/doc2.pdf;c1 sent in 0:30)
mar 17 22:12:00.87: [ 3079]: <-- [9:AT+FTH=3\r]
mar 17 22:12:01.19: [ 3079]: --> [7:CONNECT]
mar 17 22:12:01.19: [ 3079]: <-- data [3]
mar 17 22:12:01.19: [ 3079]: <-- data [2]
mar 17 22:12:02.48: [ 3079]: --> [2:OK]
mar 17 22:12:02.48: [ 3079]: <-- [5:ATH0\r]
mar 17 22:12:02.60: [ 3079]: --> [2:OK]
mar 17 22:12:02.60: [ 3079]: SESSION END


For Zetafax on Isdn line

mar 17 22:13:15.77: [ 3189]: SESSION BEGIN 000000007 NUMBER
mar 17 22:13:15.77: [ 3189]: HylaFAX (tm) Version 4.3.4
mar 17 22:13:15.77: [ 3189]: SEND FAX: JOB 3 DEST NUMBER COMMID
000000007 DEVICE '/dev/modem' FROM 'root <root@localhost>' USER admin
mar 17 22:13:15.77: [ 3189]: <-- [12:AT+FCLASS=1\r]
mar 17 22:13:15.79: [ 3189]: --> [2:OK]
mar 17 22:13:15.79: [ 3189]: DIAL NUMBER
mar 17 22:13:15.79: [ 3189]: <-- [15:ATDTNUMBER\r]
mar 17 22:14:09.20: [ 3189]: --> [4:BUSY]
mar 17 22:14:09.20: [ 3189]: SEND FAILED: JOB 3 DEST NUMBER ERR Busy
signal detected
mar 17 22:14:09.20: [ 3189]: <-- [5:ATH0\r]
mar 17 22:14:09.22: [ 3189]: --> [2:OK]
mar 17 22:14:09.22: [ 3189]: SESSION END



mar 17 22:13:15.79: [ 3189]: <-- [15:ATDTNUMBER\r]
mar 17 22:14:09.20: [ 3189]: --> [4:BUSY]


NUMBER= Telephone number



My license
Current parameters: ("hsfconfig --info")

Config for modem unit 0: /dev/ttySHSF0
       Device instance: 0-PCI-14f1:2f00-13e0:8d85
       HW revision    : Basic2 2.18 Standard DAA 3VoltsIA
       HW profile name: hsfpcibasic2hsfi
       Registration ID:
       License owner  : liberomic@xxxxxxxxx
       License key    :
       License status : OK
       Current region : ITALY (T.35 code: 0059)

The parameter of modem in Hylafax is

# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1          # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
#
ModemMfrQueryCmd:       !Rockwell
ModemModelQueryCmd:     !RC288DPi
ModemRevQueryCmd:       ATI3            # product information
#
ModemDialCmd:           ATDT%s         # T for tone dialing


I set ATX3 in the ROM modem in this way

ATZ

AT&F

ATX3

ATS11=100

AT&W



Tks for help

Michele