[hylafax-users] Fax not received

To: <hylafax-users@xxxxxxxxxxx>
Subject: [hylafax-users] Fax not received
From: "Codebue Fabio - P-Soft" <f.codebue@xxxxxxxxxx>
Reply-to: <f.codebue@xxxxxxxxxx>
Date: Wed, 20 Feb 2008 12:54:10 +0100
During all the day I have no problem receiving fax. But some voip fax can't
send to me some fax, very strange...

Here my configuration and my log
HylaFAX (tm) Version 5.1.11
Modem USRobotics 3Com 56K FaxModem


******** LOG ******************
Feb 20 11:40:11.61: [31843]: <-- [13:AT+FCLASS=1A\r]
Feb 20 11:40:16.79: [31843]: --> [7:CONNECT]
Feb 20 11:40:16.79: [31843]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Feb 20 11:40:16.79: [31843]: RECV FAX: begin
Feb 20 11:40:16.79: [31843]: <-- data [33]
Feb 20 11:40:16.79: [31843]: <-- data [2]
Feb 20 11:40:16.99: [31843]: --> [7:CONNECT]
Feb 20 11:40:16.99: [31843]: <-- data [23]
Feb 20 11:40:16.99: [31843]: <-- data [2]
Feb 20 11:40:17.71: [31843]: --> [7:CONNECT]
Feb 20 11:40:17.71: [31843]: <-- data [13]
Feb 20 11:40:17.71: [31843]: <-- data [2]
Feb 20 11:40:19.97: [31843]: --> [2:OK]
Feb 20 11:40:19.97: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:20.72: [31843]: --> [7:CONNECT]
Feb 20 11:40:23.00: [31843]: --> [5:ERROR]
Feb 20 11:40:23.00: [31843]: MODEM Command error
Feb 20 11:40:23.00: [31843]: FCS error
Feb 20 11:40:23.00: [31843]: DELAY 70 ms
Feb 20 11:40:23.07: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:23.27: [31843]: --> [7:CONNECT]
Feb 20 11:40:23.27: [31843]: <-- data [3]
Feb 20 11:40:23.27: [31843]: <-- data [2]
Feb 20 11:40:24.44: [31843]: --> [2:OK]
Feb 20 11:40:24.44: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:24.44: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:27.92: [31843]: --> [7:CONNECT]
Feb 20 11:40:29.33: [31843]: --> [2:OK]
Feb 20 11:40:29.33: [31843]: RECV recv NSF (non-standard facilities)
Feb 20 11:40:29.33: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:29.35: [31843]: --> [7:CONNECT]
Feb 20 11:40:30.02: [31843]: --> [2:OK]
Feb 20 11:40:30.02: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:40:30.02: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:30.04: [31843]: --> [7:CONNECT]
Feb 20 11:40:30.45: [31843]: --> [2:OK]
Feb 20 11:40:30.45: [31843]: RECV recv DIS (identification signal)
Feb 20 11:40:30.45: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:30.46: [31843]: --> [7:CONNECT]
Feb 20 11:40:30.84: [31843]: --> [5:ERROR]
Feb 20 11:40:30.84: [31843]: MODEM Command error
Feb 20 11:40:30.84: [31843]: FCS error
Feb 20 11:40:30.84: [31843]: DELAY 70 ms
Feb 20 11:40:30.91: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:31.10: [31843]: --> [7:CONNECT]
Feb 20 11:40:31.10: [31843]: <-- data [3]
Feb 20 11:40:31.10: [31843]: <-- data [2]
Feb 20 11:40:32.28: [31843]: --> [2:OK]
Feb 20 11:40:32.28: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:32.28: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:33.17: [31843]: --> [7:CONNECT]
Feb 20 11:40:34.29: [31843]: --> [2:OK]
Feb 20 11:40:34.29: [31843]: RECV recv NSF (non-standard facilities)
Feb 20 11:40:34.29: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:34.30: [31843]: --> [7:CONNECT]
Feb 20 11:40:34.98: [31843]: --> [2:OK]
Feb 20 11:40:34.98: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:40:34.98: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:35.00: [31843]: --> [7:CONNECT]
Feb 20 11:40:35.41: [31843]: --> [2:OK]
Feb 20 11:40:35.41: [31843]: RECV recv DIS (identification signal)
Feb 20 11:40:35.41: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:35.42: [31843]: --> [7:CONNECT]
Feb 20 11:40:36.22: [31843]: --> [5:ERROR]
Feb 20 11:40:36.22: [31843]: MODEM Command error
Feb 20 11:40:36.22: [31843]: FCS error
Feb 20 11:40:36.22: [31843]: DELAY 70 ms
Feb 20 11:40:36.29: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:36.48: [31843]: --> [7:CONNECT]
Feb 20 11:40:36.48: [31843]: <-- data [3]
Feb 20 11:40:36.48: [31843]: <-- data [2]
Feb 20 11:40:37.66: [31843]: --> [2:OK]
Feb 20 11:40:37.66: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:37.66: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:39.12: [31843]: --> [7:CONNECT]
Feb 20 11:40:41.18: [31843]: --> [2:OK]
Feb 20 11:40:41.18: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:40:41.18: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:41.19: [31843]: --> [7:CONNECT]
Feb 20 11:40:41.64: [31843]: --> [5:ERROR]
Feb 20 11:40:41.64: [31843]: MODEM Command error
Feb 20 11:40:41.64: [31843]: FCS error
Feb 20 11:40:41.64: [31843]: DELAY 70 ms
Feb 20 11:40:41.71: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:41.90: [31843]: --> [7:CONNECT]
Feb 20 11:40:41.90: [31843]: <-- data [3]
Feb 20 11:40:41.90: [31843]: <-- data [2]
Feb 20 11:40:43.08: [31843]: --> [2:OK]
Feb 20 11:40:43.08: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:43.08: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:43.57: [31843]: --> [7:CONNECT]
Feb 20 11:40:44.66: [31843]: --> [2:OK]
Feb 20 11:40:44.66: [31843]: RECV recv NSF (non-standard facilities)
Feb 20 11:40:44.66: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:44.67: [31843]: --> [7:CONNECT]
Feb 20 11:40:45.35: [31843]: --> [2:OK]
Feb 20 11:40:45.35: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:40:45.35: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:45.37: [31843]: --> [7:CONNECT]
Feb 20 11:40:45.78: [31843]: --> [2:OK]
Feb 20 11:40:45.78: [31843]: RECV recv DIS (identification signal)
Feb 20 11:40:45.78: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:45.79: [31843]: --> [7:CONNECT]
Feb 20 11:40:48.44: [31843]: --> [5:ERROR]
Feb 20 11:40:48.44: [31843]: MODEM Command error
Feb 20 11:40:48.44: [31843]: FCS error
Feb 20 11:40:48.44: [31843]: DELAY 70 ms
Feb 20 11:40:48.51: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:48.71: [31843]: --> [7:CONNECT]
Feb 20 11:40:48.71: [31843]: <-- data [3]
Feb 20 11:40:48.71: [31843]: <-- data [2]
Feb 20 11:40:49.88: [31843]: --> [2:OK]
Feb 20 11:40:49.88: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:49.88: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:50.32: [31843]: --> [7:CONNECT]
Feb 20 11:40:51.47: [31843]: --> [2:OK]
Feb 20 11:40:51.47: [31843]: RECV recv NSF (non-standard facilities)
Feb 20 11:40:51.47: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:51.48: [31843]: --> [7:CONNECT]
Feb 20 11:40:52.16: [31843]: --> [2:OK]
Feb 20 11:40:52.16: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:40:52.16: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:52.18: [31843]: --> [7:CONNECT]
Feb 20 11:40:52.59: [31843]: --> [2:OK]
Feb 20 11:40:52.59: [31843]: RECV recv DIS (identification signal)
Feb 20 11:40:52.59: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:52.60: [31843]: --> [7:CONNECT]
Feb 20 11:40:55.79: [31843]: --> [5:ERROR]
Feb 20 11:40:55.79: [31843]: MODEM Command error
Feb 20 11:40:55.79: [31843]: FCS error
Feb 20 11:40:55.79: [31843]: DELAY 70 ms
Feb 20 11:40:55.86: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:40:56.05: [31843]: --> [7:CONNECT]
Feb 20 11:40:56.05: [31843]: <-- data [3]
Feb 20 11:40:56.05: [31843]: <-- data [2]
Feb 20 11:40:57.23: [31843]: --> [2:OK]
Feb 20 11:40:57.23: [31843]: RECV send CRP (command repeat)
Feb 20 11:40:57.23: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:40:58.44: [31843]: --> [7:CONNECT]
Feb 20 11:41:01.57: [31843]: --> [5:ERROR]
Feb 20 11:41:01.57: [31843]: MODEM Command error
Feb 20 11:41:01.57: [31843]: FCS error
Feb 20 11:41:01.57: [31843]: DELAY 70 ms
Feb 20 11:41:01.64: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:41:01.83: [31843]: --> [7:CONNECT]
Feb 20 11:41:01.83: [31843]: <-- data [3]
Feb 20 11:41:01.83: [31843]: <-- data [2]
Feb 20 11:41:03.01: [31843]: --> [2:OK]
Feb 20 11:41:03.01: [31843]: RECV send CRP (command repeat)
Feb 20 11:41:03.01: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:41:10.01: [31843]: --> [0:]
Feb 20 11:41:10.01: [31843]: MODEM <Empty line>
Feb 20 11:41:10.01: [31843]: <-- data [1]
Feb 20 11:41:10.02: [31843]: --> [2:OK]
Feb 20 11:41:10.02: [31843]: RECV FAX: RSPREC invalid response received
{E104}
Feb 20 11:41:10.02: [31843]: RECV FAX: end
Feb 20 11:41:10.02: [31843]: RSPREC invalid response received {E104}
Feb 20 11:41:10.02: [31843]: SESSION END


or

******* LOG ***************
Feb 20 11:27:44.00: [31843]: <-- [13:AT+FCLASS=1A\r]
Feb 20 11:27:49.18: [31843]: --> [7:CONNECT]
Feb 20 11:27:49.18: [31843]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Feb 20 11:27:49.18: [31843]: RECV FAX: begin
Feb 20 11:27:49.18: [31843]: <-- data [33]
Feb 20 11:27:49.18: [31843]: <-- data [2]
Feb 20 11:27:49.38: [31843]: --> [7:CONNECT]
Feb 20 11:27:49.38: [31843]: <-- data [23]
Feb 20 11:27:49.38: [31843]: <-- data [2]
Feb 20 11:27:50.10: [31843]: --> [7:CONNECT]
Feb 20 11:27:50.10: [31843]: <-- data [13]
Feb 20 11:27:50.10: [31843]: <-- data [2]
Feb 20 11:27:52.36: [31843]: --> [2:OK]
Feb 20 11:27:52.36: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:27:53.22: [31843]: --> [7:CONNECT]
Feb 20 11:27:54.14: [31843]: --> [5:ERROR]
Feb 20 11:27:54.14: [31843]: MODEM Command error
Feb 20 11:27:54.14: [31843]: FCS error
Feb 20 11:27:54.14: [31843]: DELAY 70 ms
Feb 20 11:27:54.21: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:27:54.40: [31843]: --> [7:CONNECT]
Feb 20 11:27:54.40: [31843]: <-- data [3]
Feb 20 11:27:54.40: [31843]: <-- data [2]
Feb 20 11:27:55.58: [31843]: --> [2:OK]
Feb 20 11:27:55.58: [31843]: RECV send CRP (command repeat)
Feb 20 11:27:55.58: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:27:56.78: [31843]: --> [7:CONNECT]
Feb 20 11:27:58.13: [31843]: --> [5:ERROR]
Feb 20 11:27:58.13: [31843]: MODEM Command error
Feb 20 11:27:58.13: [31843]: FCS error
Feb 20 11:27:58.13: [31843]: DELAY 70 ms
Feb 20 11:27:58.20: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:27:58.39: [31843]: --> [7:CONNECT]
Feb 20 11:27:58.39: [31843]: <-- data [3]
Feb 20 11:27:58.39: [31843]: <-- data [2]
Feb 20 11:27:59.57: [31843]: --> [2:OK]
Feb 20 11:27:59.57: [31843]: RECV send CRP (command repeat)
Feb 20 11:27:59.57: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:00.78: [31843]: --> [7:CONNECT]
Feb 20 11:28:01.94: [31843]: --> [5:ERROR]
Feb 20 11:28:01.94: [31843]: MODEM Command error
Feb 20 11:28:01.94: [31843]: FCS error
Feb 20 11:28:01.94: [31843]: DELAY 70 ms
Feb 20 11:28:02.01: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:28:02.20: [31843]: --> [7:CONNECT]
Feb 20 11:28:02.20: [31843]: <-- data [3]
Feb 20 11:28:02.20: [31843]: <-- data [2]
Feb 20 11:28:03.38: [31843]: --> [2:OK]
Feb 20 11:28:03.38: [31843]: RECV send CRP (command repeat)
Feb 20 11:28:03.38: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:07.18: [31843]: --> [7:CONNECT]
Feb 20 11:28:08.54: [31843]: --> [2:OK]
Feb 20 11:28:08.54: [31843]: RECV recv NSF (non-standard facilities)
Feb 20 11:28:08.54: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:08.56: [31843]: --> [7:CONNECT]
Feb 20 11:28:09.24: [31843]: --> [2:OK]
Feb 20 11:28:09.24: [31843]: RECV recv CSI (called subscriber id)
Feb 20 11:28:09.24: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:09.25: [31843]: --> [7:CONNECT]
Feb 20 11:28:09.66: [31843]: --> [2:OK]
Feb 20 11:28:09.66: [31843]: RECV recv DIS (identification signal)
Feb 20 11:28:09.66: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:09.68: [31843]: --> [7:CONNECT]
Feb 20 11:28:11.90: [31843]: --> [2:OK]
Feb 20 11:28:11.90: [31843]: RECV recv TSI (sender id)
Feb 20 11:28:11.90: [31843]: REMOTE TSI "0522646570"
Feb 20 11:28:11.90: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:11.91: [31843]: --> [7:CONNECT]
Feb 20 11:28:12.24: [31843]: --> [2:OK]
Feb 20 11:28:12.24: [31843]: RECV recv DCS (command signal)
Feb 20 11:28:12.24: [31843]: REMOTE wants 14400 bit/s
Feb 20 11:28:12.24: [31843]: REMOTE wants A4 page width (215 mm)
Feb 20 11:28:12.24: [31843]: REMOTE wants unlimited page length
Feb 20 11:28:12.24: [31843]: REMOTE wants 3.85 line/mm
Feb 20 11:28:12.24: [31843]: REMOTE wants 2-D MMR
Feb 20 11:28:12.24: [31843]: REMOTE wants T.30 Annex A, 256-byte ECM
Feb 20 11:28:12.24: [31843]: RECV training at v.17 14400 bit/s
Feb 20 11:28:12.24: [31843]: <-- [11:AT+FRM=145\r]
Feb 20 11:28:14.00: [31843]: --> [7:CONNECT]
Feb 20 11:28:15.56: [31843]: RECV: TCF 2812 bytes, 3% non-zero, 2698
zero-run
Feb 20 11:28:15.57: [31843]: --> [10:NO CARRIER]
Feb 20 11:28:15.57: [31843]: DELAY 70 ms
Feb 20 11:28:15.64: [31843]: TRAINING succeeded
Feb 20 11:28:15.64: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:28:15.83: [31843]: --> [7:CONNECT]
Feb 20 11:28:15.83: [31843]: <-- data [3]
Feb 20 11:28:15.83: [31843]: <-- data [2]
Feb 20 11:28:17.01: [31843]: --> [2:OK]
Feb 20 11:28:17.01: [31843]: <-- [11:AT+FRM=146\r]
Feb 20 11:28:24.01: [31843]: <-- data [1]
Feb 20 11:28:24.02: [31843]: --> [2:OK]
Feb 20 11:28:24.02: [31843]: <-- [9:AT+FRH=3\r]
Feb 20 11:28:34.33: [31843]: --> [7:CONNECT]
Feb 20 11:28:44.33: [31843]: <-- data [1]
Feb 20 11:28:44.34: [31843]: --> [2:OK]
Feb 20 11:28:44.34: [31843]: <-- data [1]
Feb 20 11:28:44.54: [31843]: MODEM <Timeout>
Feb 20 11:28:44.54: [31843]: Failed to properly detect high-speed data
carrier. {E112}
Feb 20 11:28:44.54: [31843]: RECV FAX: Failed to properly detect high-speed
data carrier. {E112}
Feb 20 11:28:44.54: [31843]: DELAY 70 ms
Feb 20 11:28:44.54: [31843]: RECV FAX (000000165): recvq/fax000000157.tif
from 0522646570, subaddress <unspecified>, 0 pages in 0:55
Feb 20 11:28:44.61: [31843]: <-- [9:AT+FTH=3\r]
Feb 20 11:28:44.64: [31843]: --> [7:CONNECT]
Feb 20 11:28:44.64: [31843]: <-- data [3]
Feb 20 11:28:44.64: [31843]: <-- data [2]
Feb 20 11:28:45.82: [31843]: --> [2:OK]
Feb 20 11:28:45.82: [31843]: RECV FAX (000000165): session with 0522646570
terminated abnormally: Failed to properly detect high-speed data carrier.
{E112}
Feb 20 11:28:45.82: [31843]: RECV FAX: bin/faxrcvd 'recvq/fax000000157.tif'
'ttyS0' '000000165' 'Failed to properly detect high-speed data carrier.
{E112}'
Feb 20 11:28:45.82: [31843]: RECV FAX: end
Feb 20 11:28:45.82: [31843]: SESSION END


Codebue Fabio
.-----------------------------.
  _ \       __|       _||
  __/____|\__ \  _ \  _| _|
 _|       ____/\___/_| \__|

P-Soft di Codebue Fabio & C. sas
via B.Storti, 19
24060 - Chiuduno - BG
Italy
Phone: +39.030.839435
Fax: +39.030.5100306
Mobile: +39.348.3515786
.-----------------------------.
Web  : www.p-soft.biz
EMail: f.codebue@xxxxxxxxxx  



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
Follow-Ups:
- Re: [hylafax-users] Fax not received
  - From: Lee Howard
References:
- [hylafax-users] AVM Fritz
  - From: Patrick Obermann
- Re: [hylafax-users] [hylafax-announce] AVM Fritz
  - From: Max Mothwurf
- [hylafax-users] How to overwrite WHFC Notify setting
  - From: Elena Benítez López
- Re: [hylafax-users] How to overwrite WHFC Notify setting
  - From: Lee Howard
- [hylafax-users] FaxModify n/appiled when requeued or bunch of faxes
  - From: Elena Benítez López
Prev by Date: [hylafax-users] Overriding FaxContact per modem?
Next by Date: [hylafax-users] Hardware list...
Previous by thread: [hylafax-users] FaxModify n/appiled when requeued or bunch of faxes
Next by thread: Re: [hylafax-users] Fax not received
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions