Re: [hylafax-users] Strange SambaFax Issue

["Jeramy Eling" <Jeramy.Eling@xxxxxxxxxxxxxx>]

Hmmmm, having looked on the mail lists quite a lot over the weekend I
found lots of references to this and tried different drivers and
postscript settings all to no avail, when I fall back to my old server,
which I have at the moment, the process then works fine without
issue.......all I can think is it's the Linux server which is causing
the problem. As for differences they are as follows: -

Old Box
RH 9 (never updated, literally installed from the CD's and left)
Samba 2.28
Lprng installed @ build time from RH Cd's

New Box
Centos 4.4
Samba 3.x
Lprng downloaded from website and compiled on the box as Centos is
driven from Cups and I had to remove this and switch spoolers.



-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] 
Sent: 06 February 2008 13:44
To: Jeramy Eling
Cc: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] Strange SambaFax Issue

Jeramy Eling wrote:
>
> All went well with the migration, Hylafax, my DDI routing works and 
> users are able send via WHFC, however whenever the users use Sambafax 
> it fails. Having done a large amount of testing with different drivers

> etc. I still cannot get it work. As a last step I removed the delete 
> line from the Sambafax script and reviewed the output which was 
> generated by the script and searched for the Fax-NR: line and it's not

> there, what is there is the text broken over several lines and because

> of this the fax isn't sent.
>

Some postscript printer drivers will do this. Try a different one or try

to see if the printer driver has an "option" for "compatibility mode" or

perhaps even "EPS mode".

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*