Re: [hylafax-users] T.30 T1 timeout?

[Andrew Rinaldi <andrew.rinaldi@xxxxxxxxxxxx>]

Michael Hallager wrote:
> Jan 31 20:10:13.23: [ 1284]: V.8 handshaking succeeded, V.34-Fax (SuperG3) 
> capability enabled.
> Jan 31 20:10:13.24: [ 1284]: Primary channel rate: 28800 bit/s, Control 
> channel rate: 1200 bit/s.
> Jan 31 20:10:13.24: [ 1284]: --> [7:CONNECT]
> Jan 31 20:10:13.24: [ 1284]: Control channel selected
> Jan 31 20:10:13.25: [ 1284]: EOT received (end of transmission)
> Jan 31 20:10:13.25: [ 1284]: No receiver protocol (T.30 T1 timeout) {E126}
> Jan 31 20:10:13.26: [ 1284]: SEND FAILED: JOB 14466 DEST DELETED ERR No 
> receiver protocol (T.30 T1 timeout) {E126}
> Jan 31 20:10:13.26: [ 1284]: <-- HDLC<3:FF C8 DF>
> Jan 31 20:10:13.26: [ 1284]: <-- data [3]
> Jan 31 20:10:13.26: [ 1284]: <-- data [2]
> Jan 31 20:10:13.26: [ 1284]: MODEM input buffering enabled
> Jan 31 20:10:14.26: [ 1284]: <-- data [2]
> Jan 31 20:10:14.26: [ 1284]: --> [2:OK]
> Jan 31 20:10:14.27: [ 1284]: <-- [5:ATH0\r]
> Jan 31 20:10:14.81: [ 1284]: --> [2:OK]
> Jan 31 20:10:14.81: [ 1284]: MODEM set DTR OFF
> Jan 31 20:10:14.82: [ 1284]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
> Jan 31 20:10:14.82: [ 1284]: SESSION END

Can you set

ServerTracing: 0xFFF

in your modem config file and restart faxgetty ?

Regards

Andrew Rinaldi
Mainpine Developer Support
USA +1 503 822 9944 | UK +44 8458 909438
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*