[hylafax-users] T.30 T1 timeout?

[Michael Hallager <michael@xxxxxxxxxxxxxxxxxx>]

Jan 31 20:10:13.23: [ 1284]: V.8 handshaking succeeded, V.34-Fax (SuperG3) 
capability enabled.
Jan 31 20:10:13.24: [ 1284]: Primary channel rate: 28800 bit/s, Control 
channel rate: 1200 bit/s.
Jan 31 20:10:13.24: [ 1284]: --> [7:CONNECT]
Jan 31 20:10:13.24: [ 1284]: Control channel selected
Jan 31 20:10:13.25: [ 1284]: EOT received (end of transmission)
Jan 31 20:10:13.25: [ 1284]: No receiver protocol (T.30 T1 timeout) {E126}
Jan 31 20:10:13.26: [ 1284]: SEND FAILED: JOB 14466 DEST DELETED ERR No 
receiver protocol (T.30 T1 timeout) {E126}
Jan 31 20:10:13.26: [ 1284]: <-- HDLC<3:FF C8 DF>
Jan 31 20:10:13.26: [ 1284]: <-- data [3]
Jan 31 20:10:13.26: [ 1284]: <-- data [2]
Jan 31 20:10:13.26: [ 1284]: MODEM input buffering enabled
Jan 31 20:10:14.26: [ 1284]: <-- data [2]
Jan 31 20:10:14.26: [ 1284]: --> [2:OK]
Jan 31 20:10:14.27: [ 1284]: <-- [5:ATH0\r]
Jan 31 20:10:14.81: [ 1284]: --> [2:OK]
Jan 31 20:10:14.81: [ 1284]: MODEM set DTR OFF
Jan 31 20:10:14.82: [ 1284]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 31 20:10:14.82: [ 1284]: SESSION END


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*