Re: [hylafax-users] Faxes are labeled with a time differente than de system's one

["Tiago Teixeira" <teixeira1985@xxxxxxxxx>]

About Aidan's suggestion:
I restarted the server in other previous days, and the issue stills on.
I attach some logs, and I paste here a piece of the last one.

[root@asterisk log]# cat c000004620
Dec 19 16:06:30.31: [ 4502]: SESSION BEGIN 000004620 +351244851974
Dec 19 16:06:30.31: [ 4502]: HylaFAX (tm) Version 5.1.4
Dec 19 16:06:30.31: [ 4502]: <-- [4:ATA\r]
Dec 19 16:06:39.01: [ 4502]: --> [5:+FCON]
Dec 19 16:06:39.01: [ 4502]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Dec 19 16:06:39.01: [ 4502]: RECV FAX: begin
Dec 19 16:06:44.32: [ 4502]: --> [28:+FTSI:"                    "]
Dec 19 16:06:44.32: [ 4502]: REMOTE TSI ""
Dec 19 16:06:44.34: [ 4502]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
Dec 19 16:06:44.34: [ 4502]: REMOTE wants 14400 bit/s
Dec 19 16:06:44.34: [ 4502]: REMOTE wants A4 page width (215 mm)
Dec 19 16:06:44.34: [ 4502]: REMOTE wants unlimited page length
Dec 19 16:06:44.34: [ 4502]: REMOTE wants 3.85 line/mm
Dec 19 16:06:44.34: [ 4502]: REMOTE wants 2-D MR
Dec 19 16:06:44.34: [ 4502]: --> [2:OK]
Dec 19 16:06:44.34: [ 4502]: <-- [7:AT+FDR\r]
Dec 19 16:06:45.60: [ 4502]: --> [5:+FCFR]
Dec 19 16:06:45.61: [ 4502]: --> [28:+FTSI:"                    "]
Dec 19 16:06:45.61: [ 4502]: REMOTE TSI ""
Dec 19 16:06:45.62: [ 4502]: --> [21:+FDCS:0,5,0,2,1,0,0,1]
Dec 19 16:06:45.62: [ 4502]: REMOTE wants 14400 bit/s
Dec 19 16:06:45.62: [ 4502]: REMOTE wants A4 page width (215 mm)
Dec 19 16:06:45.62: [ 4502]: REMOTE wants unlimited page length
Dec 19 16:06:45.63: [ 4502]: REMOTE wants 3.85 line/mm
Dec 19 16:06:45.63: [ 4502]: REMOTE wants 2-D MR
Dec 19 16:06:46.79: [ 4502]: --> [7:CONNECT]
Dec 19 16:06:46.79: [ 4502]: RECV: begin page
Dec 19 16:06:46.79: [ 4502]: RECV: send trigger 022
Dec 19 16:06:46.79: [ 4502]: <-- data [1]
Dec 19 16:06:46.79: [ 4502]: Copy quality checking performed by host
Dec 19 16:07:04.08: [ 4502]: RECV: 1135 total lines, 1 bad lines, 1
consecutive bad lines
Dec 19 16:07:04.09: [ 4502]: --> [15:+FPTS:1,0,0,0,0]
Dec 19 16:07:05.38: [ 4502]: --> [6:+FET:2]
Dec 19 16:07:05.38: [ 4502]: RECV recv EOP (no more pages or documents)
Dec 19 16:07:05.38: [ 4502]: --> [2:OK]
Dec 19 16:07:05.38: [ 4502]: RECV send MCF (message confirmation)
Dec 19 16:07:05.38: [ 4502]: RECV FAX (000004620): from , page 1 in 0:25,
INF, 3.85 line/mm, 2-D MR, 14400 bit/s
Dec 19 16:07:06.38: [ 4502]: RECV FAX (000004620): recvq/fax000001732.tif
from , subaddress <unspecified>, 1 pages in 0:26
Dec 19 16:07:06.38: [ 4502]: <-- [7:AT+FDR\r]
Dec 19 16:07:09.29: [ 4502]: --> [7:+FHNG:0]
Dec 19 16:07:09.29: [ 4502]: REMOTE HANGUP: Normal and proper end of
connection (code 0)
Dec 19 16:07:09.29: [ 4502]: RECV FAX: bin/faxrcvd 'recvq/fax000001732.tif'
'ttyS0' '000004620' ''
Dec 19 16:07:09.29: [ 4502]: RECV FAX: end
Dec 19 16:07:09.29: [ 4502]: SESSION END
[root@asterisk log]#


About Lee's question:
[root@asterisk recvq]# date
Wed Dec 19 21:48:57 WET 2007
[root@asterisk recvq]# faxinfo fax000001732.tif
fax000001732.tif:
    Sender:
     Pages: 1
   Quality: Normal
      Page: ISO A4
  Received: 2007:12:19 16:06:46
TimeToRecv: 0:25
SignalRate: 14400 bit/s
DataFormat: 2-D MR
ErrCorrect: No
[root@asterisk recvq]#


Its becoming late here in Portugal, I'll dinner and rest a couple hours
tomorrow I'll follow the evolutions of this issue.

BRGDS and thanks for the given support,
Teixeira


-----Original Message-----
From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] 
Sent: quarta-feira, 19 de Dezembro de 2007 21:34
To: teixeira1985@xxxxxxxxx
Cc: 
Subject: Re: [hylafax-users] Faxes are labeled with a time differente than
de system's one

Tiago Teixeira wrote:
> I'm using Hylafax v 5.1.4 in CentOS machine

Here's a "test" done on HylaFAX+ 5.2.0 yesterday.  Notice that the 
timestamp on the file agrees with the "Received" timestamp shown by 
faxinfo.  Can you show a similar set of information for a sample on yours?

[root@gollum recvq]# date
Wed Dec 19 13:30:15 PST 2007
[root@gollum recvq]# ls -l fax000004539.tif
-rw-------  1 uucp uucp 1230 Dec 18 15:30 fax000004539.tif
[root@gollum recvq]# faxinfo fax000004539.tif
fax000004539.tif:
    Sender: NothingSetup
     Pages: 1
   Quality: Normal
      Page: 1728 by 6
  Received: 2007:12:18 15:30:56
TimeToRecv: 0:00:12
SignalRate: 14400 bit/s
DataFormat: 2-D MMR
ErrCorrect: Yes
[root@gollum recvq]#

Also, did you follow Aidan's suggestion and try restarting faxgetty to 
see if that made a difference?

Thanks,

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*