Re: [hylafax-users] No carrier problem.

[Marcin Giedz <giedz@xxxxxxxx>]

Thanks Lee,I will give it a goal tomorrow .

Regards,
Marcin

Lee Howard pisze:
> Marcin Giedz wrote:
>> It seems that one of our clients has particular facsimile or settings
>> for their fax server. Every time someone from my company sending a fax
>> to this number get "No carrier detected". My fax card is MainPine
>> QUATRO+.
>>
>> gru 06 19:03:31.41: [25399]: SESSION BEGIN 000024990 XXXX
>> gru 06 19:03:31.41: [25399]: HylaFAX (tm) Version 4.3.4
>> gru 06 19:03:31.41: [25399]: SEND FAX: JOB 19776 DEST XXXX COMMID
>> 000024990 DEVICE '/dev/ttyS5' FROM 'user <user@mach1>' USER user
>> gru 06 19:03:31.41: [25399]: STATE CHANGE: RUNNING -> SENDING
>> gru 06 19:03:31.41: [25399]: Apply DialString rules to "YYYY"
>> gru 06 19:03:31.41: [25399]: --> return result "YYYY"
>> gru 06 19:03:31.41: [25399]: <-- [14:AT+FCLASS=1.0\r]
>> gru 06 19:03:31.42: [25399]: --> [2:OK]
>> gru 06 19:03:31.42: [25399]: DIAL YYYY
>> gru 06 19:03:31.42: [25399]: <-- [16:ATDTYYYY\r]
>> gru 06 19:03:41.21: [25399]: --> [2:OK]
>> gru 06 19:03:41.21: [25399]: SEND FAILED: JOB 19776 DEST 00225215619 ERR
>> No carrier detected
>
> The "OK" result to ATD is ambiguous and undefined.  This has been seen
> with both Multitech and Mainpine cards due to some issue with the
> firmware that came from Agere.  You may want to check with Mainpine to
> see if there is a newer firmware that fixes this.  But there may not
> be... and in that case you probably can work-around the problem by
> using Class 1 to that destination instead of Class 1.0.
>
> Thanks,
>
> Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*