Re: [hylafax-users] MT5600ZDXV Insanity

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

David Davis wrote:

> I am trying to capture 4 DTMF tones given by our PBX and route the 
> faxes via email/pdf based on the extension dialed.


Please look at the "CallIDPattern: SHEILDED_DTMF" modem configuration 
option.  See:

http://hylafax.sourceforge.net/man/hylafax-config.php

Based on your message here...

> I pull up minicom, connect to the modem, and can enter the following 
> commands:
>  
> AT#CLS=8 (switch to voice)
> OK
> hr.
> AT#VLS=4
> OK
> (dial the number)
> RING
>  
> ATA
> OK
> .1.2.3.4 <---DTMF works!!
>  
> AT+FCLASS=1.0
> OK
> ATA
> (Fax Handshake Begins)


RingsBeforeAnswer: 0
ModemRingsBeforeResponse: 4
ModemRingResponse: "AT#CLS=8\nAT#VLS=4;H1"
ModemAnswerCmd: "AT+FCLASS=1.0\nATA"
CallIDPattern: SHIELDED_DTMF

I think that you're just missing the CallIDPattern part.

Please review the man page above.

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*