Re: [hylafax-users] 4.3.0: turn off duplicating faxes when resending after busy signal

[Aidan Van Dyk <aidan@xxxxxxxx>]

* Ekkard Gerlach <ekkardgerlach@xxxxxxx> [071010 09:22]:
> * Lee Howard schrieb:
> 
> > Ekkard Gerlach wrote:
> > 
> > >it seems that there is no general duplicating. But HF duplicates in some 
> > >error states, e.g. if the receiving station doesn't cope with class 2. 
> > >Now out modem here runs with class 1 and no duplicating occurs.
> > >
> > 
> > Could you be more specific about what the conditions are when the 
> > duplication will occur?
> 
> If "Elsa Microlink Fun" Modem is configured with class2 and 
> any dial can't reach a outgoing line because of a misconfigured 
> config.ttyS0! A ",0" was missing in dial command!
> 
> The right configuration of config.ttyS0 with ",0" in dial string:  ATDT,0
> Without ",0"  the modem didn't get any tone, hangs up, makes error 
> messages like Kill time expired, No carrier detected and mostly 
> Blacklisted by modem and THEN DUPLICATS the jobs sometimes:

Do you have any logs of this?  syslog from faxq with config having
ServerTracing: 0xFFFFF would be nice.  I've never come across anything
like this...

a.


-- 
Aidan Van Dyk                                             aidan@xxxxxxxx
Senior Software Developer                          +1 215 825-8700 x8103
iFAX Solutions, Inc.                                http://www.ifax.com/

Attachment: signature.asc
Description: Digital signature