[hylafax-users] Failure to train modems

["Todd Jetzer" <tjetzer@xxxxxxxxxxxxxx>]

I'm running Hylafax with a Multimodem DID and have started to receive this error.  Can anyone help?

 

Sep 21 11:44:35.47: [ 3247]: SESSION BEGIN 000004013 1920459****
Sep 21 11:44:35.47: [ 3247]: HylaFAX (tm) Version 4.3.0
Sep 21 11:44:35.47: [ 3247]: CallID: "5593"
Sep 21 11:44:35.47: [ 3247]: <-- [4:ATA\r]
Sep 21 11:44:43.78: [ 3247]: --> [7:CONNECT]
Sep 21 11:44:43.78: [ 3247]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
Sep 21 11:44:43.78: [ 3247]: RECV FAX: begin
Sep 21 11:44:43.82: [ 3247]: <-- data [32]
Sep 21 11:44:43.82: [ 3247]: <-- data [2]
Sep 21 11:44:43.85: [ 3247]: --> [7:CONNECT]
Sep 21 11:44:43.85: [ 3247]: <-- data [23]
Sep 21 11:44:43.85: [ 3247]: <-- data [2]
Sep 21 11:44:43.87: [ 3247]: --> [7:CONNECT]
Sep 21 11:44:43.87: [ 3247]: <-- data [13]
Sep 21 11:44:43.87: [ 3247]: <-- data [2]
Sep 21 11:44:46.14: [ 3247]: --> [2:OK]
Sep 21 11:44:46.14: [ 3247]: <-- [9:AT+FRH=3\r]
Sep 21 11:44:46.37: [ 3247]: --> [7:CONNECT]
Sep 21 11:44:48.10: [ 3247]: --> [2:OK]
Sep 21 11:44:48.10: [ 3247]: REMOTE TSI "920459****
Sep 21 11:44:48.10: [ 3247]: <-- [9:AT+FRH=3\r]
Sep 21 11:44:48.11: [ 3247]: --> [7:CONNECT]
Sep 21 11:44:48.42: [ 3247]: --> [2:OK]
Sep 21 11:44:48.42: [ 3247]: REMOTE wants 14400 bit/s
Sep 21 11:44:48.42: [ 3247]: REMOTE wants A4 page width (215 mm)
Sep 21 11:44:48.42: [ 3247]: REMOTE wants unlimited page length
Sep 21 11:44:48.42: [ 3247]: REMOTE wants 3.85 line/mm
Sep 21 11:44:48.42: [ 3247]: REMOTE wants 2-D MMR
Sep 21 11:44:48.42: [ 3247]: REMOTE wants T.30 Annex A, 256-byte ECM
Sep 21 11:44:48.42: [ 3247]: RECV training at v.17 14400 bit/s
Sep 21 11:44:48.42: [ 3247]: <-- [11:AT+FRM=145\r]
Sep 21 11:44:52.92: [ 3247]: --> [0:]
Sep 21 11:44:52.92: [ 3247]: MODEM <Empty line>
Sep 21 11:44:52.92: [ 3247]: <-- data [1]
Sep 21 11:44:52.93: [ 3247]: --> [2:]
Sep 21 11:44:52.93: [ 3247]: --> [2:OK]
Sep 21 11:44:52.93: [ 3247]: <-- [9:AT+FRS=7\r]
Sep 21 11:45:15.57: [ 3247]: --> [2:OK]
Sep 21 11:45:15.57: [ 3247]: <-- [9:AT+FTH=3\r]
Sep 21 11:45:16.54: [ 3247]: --> [7:CONNECT]
Sep 21 11:45:16.54: [ 3247]: <-- data [3]
Sep 21 11:45:16.54: [ 3247]: <-- data [2]
Sep 21 11:45:16.93: [ 3247]: --> [2:OK]
Sep 21 11:45:16.93: [ 3247]: TRAINING failed
Sep 21 11:45:16.93: [ 3247]: <-- [9:AT+FRH=3\r]
Sep 21 11:45:23.93: [ 3247]: --> [0:]
Sep 21 11:45:23.93: [ 3247]: MODEM <Empty line>
Sep 21 11:45:23.93: [ 3247]: <-- data [1]
Sep 21 11:45:23.94: [ 3247]: --> [2:]
Sep 21 11:45:23.94: [ 3247]: --> [2:OK]
Sep 21 11:45:23.94: [ 3247]: RECV FAX: Failure to train modems
Sep 21 11:45:23.94: [ 3247]: RECV FAX: end
Sep 21 11:45:23.94: [ 3247]: SESSION END

 

Help! Please!

Thanks

Todd