Re: [hylafax-users] Send fax problem (copy 2 or 3 times)

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Yudi Wijaya wrote:

> Sep 06 12:24:06.41: [21789]: <-- [9:AT+FRH=3\r]
> Sep 06 12:24:07.18: [21789]: --> [7:CONNECT]
> Sep 06 12:24:08.21: [21789]: --> [2:OK]
> Sep 06 12:24:08.21: [21789]: SEND recv RTN (retrain negative)
> Sep 06 12:24:08.21: [21789]: SEND training at v.29 7200 bit/s


> Sep 06 12:26:27.86: [21789]: <-- [9:AT+FRH=3\r]
> Sep 06 12:26:28.68: [21789]: --> [7:CONNECT]
> Sep 06 12:26:29.67: [21789]: --> [2:OK]
> Sep 06 12:26:29.67: [21789]: SEND recv MCF (message confirmation)
> Sep 06 12:26:29.68: [21789]: SEND FAX (000000166): FROM 
> yudiw@xxxxxxxxxxxxxx TO 63858427 (page 1 of 1 sent in 4:12)


The receiver "rejected" the first transmission of the page and so 
HylaFAX resent it.  The page was accepted the 2nd time.  If the receiver 
looks at the pages they'll probably notice that the first copy is more 
"messy" than the second copy.  That said, if you don't like this 
behavior, you can put this in your modem config file:

 RTNHandlingMethod: Ignore

> Sep 06 12:52:08.07: [22145]: <-- [12:ATDT5399372\r]
> Sep 06 12:53:12.80: [22145]: --> [10:NO CARRIER]


This means that the modem dialed but did not "hear" fax signalling at 
the receiver.  Wrong number, maybe?

Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*