Re: [hylafax-users] FAX over T1

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Joe acquisto wrote:

> I have an existing Hylafax system using a mainpine 4 port board, 4 POTS lines.
>
> What would I need to do, or where is the reading material, for what I need to do, to convert the Hylafax server to use the T1 line?   Reliably.  Preferably to use DID's as well.
>
> I should add the T1 is soley for use with a newly installed Asterisk system.  Am I guessing correctly that I would have to add some sort of device in the Asterisk server, to act "FAX extensions", keeping the mainpine on the hylafax?
>
> Or is this the wrong place to ask that?

Since you're using an Asterisk PBX and the T1 is being terminated there 
you don't need hardware modems.  See http://iaxmodem.sourceforge.net.

However, if you wanted to use the existing modems still you would 
connect the Asterisk PBX to a channel bank and then the modems to the 
channel bank.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*