Re: [hylafax-users] Hylafax cannot receive faxes

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Ján Koštial wrote:

> Jun 22 08:25:17.32: [10397]: <-- [9:AT+FTH=3\r]
> Jun 22 08:25:17.37: [10397]: --> [7:CONNECT]
> Jun 22 08:25:17.37: [10397]: <-- HDLC<23:FF C0 C2 4E A6 6E 4E A6 CA 1E 86 62 B4 74 2A 74 4A 74 D2 04 04 04 04>
> Jun 22 08:25:17.37: [10397]: <-- data [23]
> Jun 22 08:25:17.37: [10397]: <-- data [2]
> Jun 22 08:25:19.16: [10397]: --> [7:CONNECT]
> Jun 22 08:25:19.16: [10397]: <-- HDLC<7:FF C8 C1 00 46 1F 22>
> Jun 22 08:25:19.16: [10397]: <-- data [7]
> Jun 22 08:25:19.16: [10397]: <-- data [2]
> Jun 22 08:25:19.62: [10397]: --> [2:OK]
>  
>
> Jun 22 07:59:13.05: [12170]: <-- [9:AT+FRH=3\r]
> Jun 22 07:59:13.58: [12170]: --> [7:CONNECT]
> Jun 22 07:59:15.03: [12170]: --> HDLC<23:FF C0 C2 4E A6 6E 4E A6 CA 1E 86 62 B4 74 2A 74 4A 74 D2 04 04 04 04>
> Jun 22 07:59:15.03: [12170]: --> [2:OK]
> Jun 22 07:59:15.03: [12170]: REMOTE TSI "K.R.T.-FaxServer"
> Jun 22 07:59:15.03: [12170]: <-- [9:AT+FRH=3\r]
> Jun 22 07:59:15.07: [12170]: --> [7:CONNECT]
> Jun 22 07:59:15.43: [12170]: --> HDLC<7:FF C8 C1 00 46 1F 22>
> Jun 22 07:59:15.43: [12170]: --> [2:OK]

The sending modem adds two FCS bytes to every HDLC frame that is sent.  
The receiver is supposed to send them to HylaFAX.  The receiving modem 
is not sending the two FCS bytes to HylaFAX, and so that's the problem.

In your receiving modem config file please put:

 Class1FrameOverhead: 2

And please help us make things better by sending me the output of 
probemodem when run against that modem.

Thanks,

Lee.



____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*