 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] Hylafax cannot receive faxes
- To: <hylafax-users@xxxxxxxxxxx>
- Subject: [hylafax-users] Hylafax cannot receive faxes
- From: Ján Koštial <jan.kostial@xxxxxxxxxx>
- Date: Thu, 21 Jun 2007 22:17:31 +0200
Hi, I have installed Hylafax on new Fedora7 (modem ZyXEL omni56K Plus). I receive fax from another Hylafax on Fedora Core 5 (modem Motorola?) with error. Can anyone help me? Thanks. Jan Kostial log from sending side: Jun 21 20:50:53.78: [ 3020]: SESSION BEGIN 000004288 421445623384 Jun 21 20:50:53.78: [ 3020]: HylaFAX (tm) Version 4.3.0 Jun 21 20:50:53.78: [ 3020]: SEND FAX: JOB 760 DEST 5623384 COMMID 000004288 DEVICE '/dev/ttyS0' FROM 'datarix <datarix@xxxxxxxxxxxxxxxxxxxx>' USER datarix Jun 21 20:50:53.78: [ 3020]: <-- [12:AT+FCLASS=1\r] Jun 21 20:50:53.79: [ 3020]: --> [2:OK] Jun 21 20:50:53.79: [ 3020]: DIAL 5623384 Jun 21 20:50:53.79: [ 3020]: <-- [14:ATX3DT5623384\r] Jun 21 20:51:05.95: [ 3020]: --> [7:CONNECT] Jun 21 20:51:07.67: [ 3020]: --> [2:OK] Jun 21 20:51:07.67: [ 3020]: REMOTE NSF "AD 00 55 48 79 6C 61 46 41 58 20 28 74 6D 29 20 56 65 72 73 69 6F 6E 20 34 2E 33 2E 33" Jun 21 20:51:07.67: [ 3020]: NSF remote fax equipment: HylaFAX Jun 21 20:51:07.67: [ 3020]: NSF remote station ID: "HylaFAX (tm) Version 4.3.3" Jun 21 20:51:07.67: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:07.69: [ 3020]: --> [7:CONNECT] Jun 21 20:51:08.68: [ 3020]: --> [2:OK] Jun 21 20:51:08.68: [ 3020]: REMOTE CSI "DATARIX" Jun 21 20:51:08.68: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:08.70: [ 3020]: --> [7:CONNECT] Jun 21 20:51:09.43: [ 3020]: --> [2:OK] Jun 21 20:51:09.43: [ 3020]: REMOTE best rate 14400 bit/s Jun 21 20:51:09.43: [ 3020]: REMOTE max A3 page width (303 mm) Jun 21 20:51:09.43: [ 3020]: REMOTE max unlimited page length Jun 21 20:51:09.43: [ 3020]: REMOTE best vres R16 x 15.4 line/mm Jun 21 20:51:09.43: [ 3020]: REMOTE format support: MH, MR, MMR Jun 21 20:51:09.43: [ 3020]: REMOTE supports T.30 Annex A, 256-byte ECM Jun 21 20:51:09.43: [ 3020]: REMOTE best 0 ms/scanline Jun 21 20:51:09.43: [ 3020]: USE 14400 bit/s Jun 21 20:51:09.43: [ 3020]: USE error correction mode Jun 21 20:51:09.43: [ 3020]: SEND file "docq/doc1033.pdf;c1" Jun 21 20:51:09.43: [ 3020]: USE A4 page width (215 mm) Jun 21 20:51:09.43: [ 3020]: USE unlimited page length Jun 21 20:51:09.44: [ 3020]: USE 7.7 line/mm Jun 21 20:51:09.44: [ 3020]: USE 2-D MMR Jun 21 20:51:09.44: [ 3020]: USE 0 ms/scanline Jun 21 20:51:09.44: [ 3020]: SEND training at v.17 14400 bit/s Jun 21 20:51:09.44: [ 3020]: <-- [9:AT+FRS=7\r] Jun 21 20:51:09.57: [ 3020]: --> [2:OK] Jun 21 20:51:09.57: [ 3020]: <-- [9:AT+FTH=3\r] Jun 21 20:51:09.61: [ 3020]: --> [7:CONNECT] Jun 21 20:51:09.61: [ 3020]: <-- data [23] Jun 21 20:51:09.61: [ 3020]: <-- data [2] Jun 21 20:51:11.40: [ 3020]: --> [7:CONNECT] Jun 21 20:51:11.40: [ 3020]: <-- data [7] Jun 21 20:51:11.40: [ 3020]: <-- data [2] Jun 21 20:51:11.87: [ 3020]: --> [2:OK] Jun 21 20:51:11.87: [ 3020]: <-- [9:AT+FTS=7\r] Jun 21 20:51:11.95: [ 3020]: --> [2:OK] Jun 21 20:51:11.95: [ 3020]: <-- [11:AT+FTM=145\r] Jun 21 20:51:11.99: [ 3020]: --> [7:CONNECT] Jun 21 20:51:11.99: [ 3020]: <-- data [1024] Jun 21 20:51:11.99: [ 3020]: <-- data [1024] Jun 21 20:51:11.99: [ 3020]: <-- data [652] Jun 21 20:51:11.99: [ 3020]: <-- data [2] Jun 21 20:51:15.11: [ 3020]: --> [2:OK] Jun 21 20:51:15.11: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:15.54: [ 3020]: --> [7:CONNECT] Jun 21 20:51:16.37: [ 3020]: --> [2:OK] Jun 21 20:51:16.37: [ 3020]: REMOTE CSI "DATARIX" Jun 21 20:51:16.37: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:16.38: [ 3020]: --> [7:CONNECT] Jun 21 20:51:17.10: [ 3020]: --> [2:OK] Jun 21 20:51:17.10: [ 3020]: SEND training at v.17 14400 bit/s Jun 21 20:51:17.10: [ 3020]: <-- [9:AT+FRS=7\r] Jun 21 20:51:17.23: [ 3020]: --> [2:OK] Jun 21 20:51:17.23: [ 3020]: <-- [9:AT+FTH=3\r] Jun 21 20:51:17.28: [ 3020]: --> [7:CONNECT] Jun 21 20:51:17.28: [ 3020]: <-- data [23] Jun 21 20:51:17.28: [ 3020]: <-- data [2] Jun 21 20:51:19.07: [ 3020]: --> [7:CONNECT] Jun 21 20:51:19.07: [ 3020]: <-- data [7] Jun 21 20:51:19.07: [ 3020]: <-- data [2] Jun 21 20:51:19.54: [ 3020]: --> [2:OK] Jun 21 20:51:19.54: [ 3020]: <-- [9:AT+FTS=7\r] Jun 21 20:51:19.63: [ 3020]: --> [2:OK] Jun 21 20:51:19.63: [ 3020]: <-- [11:AT+FTM=145\r] Jun 21 20:51:19.66: [ 3020]: --> [7:CONNECT] Jun 21 20:51:19.66: [ 3020]: <-- data [1024] Jun 21 20:51:19.66: [ 3020]: <-- data [1024] Jun 21 20:51:19.66: [ 3020]: <-- data [652] Jun 21 20:51:19.66: [ 3020]: <-- data [2] Jun 21 20:51:22.77: [ 3020]: --> [2:OK] Jun 21 20:51:22.77: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:23.22: [ 3020]: --> [7:CONNECT] Jun 21 20:51:24.04: [ 3020]: --> [2:OK] Jun 21 20:51:24.04: [ 3020]: REMOTE CSI "DATARIX" Jun 21 20:51:24.04: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:24.06: [ 3020]: --> [7:CONNECT] Jun 21 20:51:24.76: [ 3020]: --> [2:OK] Jun 21 20:51:25.10: [ 3020]: SEND training at v.17 14400 bit/s Jun 21 20:51:25.10: [ 3020]: <-- [9:AT+FRS=7\r] Jun 21 20:51:25.23: [ 3020]: --> [2:OK] Jun 21 20:51:25.23: [ 3020]: <-- [9:AT+FTH=3\r] Jun 21 20:51:25.28: [ 3020]: --> [7:CONNECT] Jun 21 20:51:25.28: [ 3020]: <-- data [23] Jun 21 20:51:25.28: [ 3020]: <-- data [2] Jun 21 20:51:27.06: [ 3020]: --> [7:CONNECT] Jun 21 20:51:27.06: [ 3020]: <-- data [7] Jun 21 20:51:27.06: [ 3020]: <-- data [2] Jun 21 20:51:27.53: [ 3020]: --> [2:OK] Jun 21 20:51:27.53: [ 3020]: <-- [9:AT+FTS=7\r] Jun 21 20:51:27.61: [ 3020]: --> [2:OK] Jun 21 20:51:27.61: [ 3020]: <-- [11:AT+FTM=145\r] Jun 21 20:51:27.65: [ 3020]: --> [7:CONNECT] Jun 21 20:51:27.65: [ 3020]: <-- data [1024] Jun 21 20:51:27.65: [ 3020]: <-- data [1024] Jun 21 20:51:27.65: [ 3020]: <-- data [652] Jun 21 20:51:27.65: [ 3020]: <-- data [2] Jun 21 20:51:30.77: [ 3020]: --> [2:OK] Jun 21 20:51:30.77: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:31.23: [ 3020]: --> [7:CONNECT] Jun 21 20:51:32.04: [ 3020]: --> [2:OK] Jun 21 20:51:32.04: [ 3020]: REMOTE CSI "DATARIX" Jun 21 20:51:32.04: [ 3020]: <-- [9:AT+FRH=3\r] Jun 21 20:51:32.06: [ 3020]: --> [7:CONNECT] Jun 21 20:51:32.76: [ 3020]: --> [2:OK] Jun 21 20:51:32.76: [ 3020]: DIS/DTC received 3 times; DCS not recognized Jun 21 20:51:32.76: [ 3020]: SEND: DIS/DTC received 3 times; DCS not recognized; Giving up after 3 attempts to send same page "docq/doc1033.pdf;c1", dirnum 0 Jun 21 20:51:32.76: [ 3020]: <-- [9:AT+FTH=3\r] Jun 21 20:51:32.81: [ 3020]: --> [7:CONNECT] Jun 21 20:51:32.81: [ 3020]: <-- data [3] Jun 21 20:51:32.81: [ 3020]: <-- data [2] Jun 21 20:51:34.12: [ 3020]: --> [2:OK] Jun 21 20:51:34.12: [ 3020]: <-- [5:ATH0\r] Jun 21 20:51:34.84: [ 3020]: --> [2:OK] Jun 21 20:51:34.84: [ 3020]: SESSION END log fromreceiving side: Jun 21 20:25:01.60: [ 2773]: SESSION BEGIN 000000007 421445623384 Jun 21 20:25:01.60: [ 2773]: HylaFAX (tm) Version 4.3.3 Jun 21 20:25:01.60: [ 2773]: <-- [4:ATA\r] Jun 21 20:25:08.27: [ 2773]: --> [7:CONNECT] Jun 21 20:25:08.27: [ 2773]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyS0' Jun 21 20:25:08.27: [ 2773]: RECV FAX: begin Jun 21 20:25:08.27: [ 2773]: <-- data [32] Jun 21 20:25:08.27: [ 2773]: <-- data [2] Jun 21 20:25:09.53: [ 2773]: --> [7:CONNECT] Jun 21 20:25:09.53: [ 2773]: <-- data [23] Jun 21 20:25:09.53: [ 2773]: <-- data [2] Jun 21 20:25:10.54: [ 2773]: --> [7:CONNECT] Jun 21 20:25:10.54: [ 2773]: <-- data [13] Jun 21 20:25:10.54: [ 2773]: <-- data [2] Jun 21 20:25:11.04: [ 2773]: --> [2:OK] Jun 21 20:25:11.04: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:11.56: [ 2773]: --> [7:CONNECT] Jun 21 20:25:13.01: [ 2773]: --> [2:OK] Jun 21 20:25:13.01: [ 2773]: REMOTE TSI "K.R.T.-FaxServer" Jun 21 20:25:13.01: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:13.05: [ 2773]: --> [7:CONNECT] Jun 21 20:25:13.41: [ 2773]: --> [2:OK] Jun 21 20:25:13.41: [ 2773]: DELAY 1500 ms Jun 21 20:25:14.91: [ 2773]: <-- [9:AT+FTH=3\r] Jun 21 20:25:15.95: [ 2773]: --> [7:CONNECT] Jun 21 20:25:15.95: [ 2773]: <-- data [32] Jun 21 20:25:15.95: [ 2773]: <-- data [2] Jun 21 20:25:17.20: [ 2773]: --> [7:CONNECT] Jun 21 20:25:17.20: [ 2773]: <-- data [23] Jun 21 20:25:17.20: [ 2773]: <-- data [2] Jun 21 20:25:18.23: [ 2773]: --> [7:CONNECT] Jun 21 20:25:18.23: [ 2773]: <-- data [13] Jun 21 20:25:18.23: [ 2773]: <-- data [2] Jun 21 20:25:18.72: [ 2773]: --> [2:OK] Jun 21 20:25:18.72: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:19.14: [ 2773]: --> [7:CONNECT] Jun 21 20:25:20.67: [ 2773]: --> [2:OK] Jun 21 20:25:20.67: [ 2773]: REMOTE TSI "K.R.T.-FaxServer" Jun 21 20:25:20.67: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:20.71: [ 2773]: --> [7:CONNECT] Jun 21 20:25:21.07: [ 2773]: --> [2:OK] Jun 21 20:25:21.07: [ 2773]: DELAY 1500 ms Jun 21 20:25:22.57: [ 2773]: <-- [9:AT+FTH=3\r] Jun 21 20:25:23.61: [ 2773]: --> [7:CONNECT] Jun 21 20:25:23.61: [ 2773]: <-- data [32] Jun 21 20:25:23.61: [ 2773]: <-- data [2] Jun 21 20:25:24.87: [ 2773]: --> [7:CONNECT] Jun 21 20:25:24.87: [ 2773]: <-- data [23] Jun 21 20:25:24.87: [ 2773]: <-- data [2] Jun 21 20:25:25.89: [ 2773]: --> [7:CONNECT] Jun 21 20:25:25.89: [ 2773]: <-- data [13] Jun 21 20:25:25.89: [ 2773]: <-- data [2] Jun 21 20:25:26.38: [ 2773]: --> [2:OK] Jun 21 20:25:26.38: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:27.14: [ 2773]: --> [7:CONNECT] Jun 21 20:25:28.67: [ 2773]: --> [2:OK] Jun 21 20:25:28.67: [ 2773]: REMOTE TSI "K.R.T.-FaxServer" Jun 21 20:25:28.67: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:28.71: [ 2773]: --> [7:CONNECT] Jun 21 20:25:29.07: [ 2773]: --> [2:OK] Jun 21 20:25:29.07: [ 2773]: DELAY 1500 ms Jun 21 20:25:30.57: [ 2773]: <-- [9:AT+FTH=3\r] Jun 21 20:25:31.61: [ 2773]: --> [7:CONNECT] Jun 21 20:25:31.61: [ 2773]: <-- data [32] Jun 21 20:25:31.61: [ 2773]: <-- data [2] Jun 21 20:25:32.87: [ 2773]: --> [7:CONNECT] Jun 21 20:25:32.87: [ 2773]: <-- data [23] Jun 21 20:25:32.87: [ 2773]: <-- data [2] Jun 21 20:25:33.89: [ 2773]: --> [7:CONNECT] Jun 21 20:25:33.89: [ 2773]: <-- data [13] Jun 21 20:25:33.89: [ 2773]: <-- data [2] Jun 21 20:25:34.38: [ 2773]: --> [2:OK] Jun 21 20:25:34.38: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:34.67: [ 2773]: --> [7:CONNECT] Jun 21 20:25:35.66: [ 2773]: --> [2:OK] Jun 21 20:25:35.66: [ 2773]: HDLC frame too short (3 bytes) Jun 21 20:25:35.66: [ 2773]: <-- [9:AT+FRS=7\r] Jun 21 20:25:35.83: [ 2773]: --> [2:OK] Jun 21 20:25:35.83: [ 2773]: <-- [9:AT+FTH=3\r] Jun 21 20:25:36.87: [ 2773]: --> [7:CONNECT] Jun 21 20:25:36.87: [ 2773]: <-- data [3] Jun 21 20:25:36.87: [ 2773]: <-- data [2] Jun 21 20:25:37.09: [ 2773]: --> [2:OK] Jun 21 20:25:37.09: [ 2773]: RECV send CRP (command repeat) Jun 21 20:25:37.09: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:44.09: [ 2773]: --> [0:] Jun 21 20:25:44.09: [ 2773]: MODEM <Empty line> Jun 21 20:25:44.09: [ 2773]: <-- data [1] Jun 21 20:25:44.09: [ 2773]: --> [2:OK] Jun 21 20:25:44.09: [ 2773]: DELAY 1500 ms Jun 21 20:25:45.59: [ 2773]: <-- [9:AT+FTH=3\r] Jun 21 20:25:46.64: [ 2773]: --> [7:CONNECT] Jun 21 20:25:46.64: [ 2773]: <-- data [32] Jun 21 20:25:46.64: [ 2773]: <-- data [2] Jun 21 20:25:47.90: [ 2773]: --> [7:CONNECT] Jun 21 20:25:47.90: [ 2773]: <-- data [23] Jun 21 20:25:47.90: [ 2773]: <-- data [2] Jun 21 20:25:48.92: [ 2773]: --> [7:CONNECT] Jun 21 20:25:48.92: [ 2773]: <-- data [13] Jun 21 20:25:48.92: [ 2773]: <-- data [2] Jun 21 20:25:49.41: [ 2773]: --> [2:OK] Jun 21 20:25:49.41: [ 2773]: <-- [9:AT+FRH=3\r] Jun 21 20:25:56.41: [ 2773]: --> [0:] Jun 21 20:25:56.41: [ 2773]: MODEM <Empty line> Jun 21 20:25:56.41: [ 2773]: <-- data [1] Jun 21 20:25:56.42: [ 2773]: --> [2:OK] Jun 21 20:25:56.42: [ 2773]: RECV FAX: RSPREC invalid response received Jun 21 20:25:56.42: [ 2773]: RECV FAX: end Jun 21 20:25:56.42: [ 2773]: SESSION END ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Hylafax cannot receive faxes
- From: Lee Howard
- Re: [hylafax-users] Hylafax cannot receive faxes
- Prev by Date: Re: [hylafax-users] hfaxd pdf2fax image quality
- Next by Date: Re: [hylafax-users] modem stuck in receiving state
- Previous by thread: Re: [hylafax-users] Suppress Body of Email
- Next by thread: Re: [hylafax-users] Hylafax cannot receive faxes
- Index(es):
Project hosted by iFAX Solutions