Re: [hylafax-users] how to check modem activity which logs

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Raphael,

Page 18 of the 2864I user manual tells you how to test your ISDN connection
by sending a call on one channel and receiving on the other.... what happens
if you do this ?

Here's a link to the user manual;

ftp://ftp.zyxel.com/Elite_2864I/user_guide/Elite%202864I_2.pdf

Regards

ANDREW RINALDI
Mainpine Limited - Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Raphael Perrin
Sent: 05 June 2007 09:18
To: hylafax-users@xxxxxxxxxxx
Subject: Re: [hylafax-users] how to check modem activity which logs



this is what I get in syslog when I start hylafax :

Jun  5 10:17:55 DhcpDNS FaxQueuer[6321]: HylaFAX (tm) Version 4.3.1
Jun  5 10:17:55 DhcpDNS FaxQueuer[6321]: Copyright (c) 1990-1996 Sam Leffler
Jun  5 10:17:55 DhcpDNS FaxQueuer[6321]: Copyright (c) 1991-1996 Silicon
Graphics, Inc.
Jun  5 10:17:55 DhcpDNS HylaFAX[6323]: HylaFAX INET Protocol Server:
restarted.
Jun  5 10:17:55 DhcpDNS FaxGetty[6334]: OPEN /dev/ttyS0  HylaFAX (tm)
Version
4.3.1


Jun  5 10:18:05 DhcpDNS FaxGetty[6334]: MODEM ZYXEL ISDN MODEM LINK STATUS
REPORT CONNECT DTE SPEED     : ERROR CONTROL LEVEL   : PROTOCOL LINK SPEED
:
CAUSE                 : NORMAL CALL CLEARING CAUSE VALUE           : 16
BYTES
RECEIVED        : 0 BYTES SENT            : 0 HDLC FCS ERROR        : 0 HDLC
RECEIVE OVERRUN  : 0 HDLC TRANSMIT UNDERRUN: 0 28642/



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*