[hylafax-users] Fax to email - Any idea what this error means?

["Matt Arnilo S. Baluyos (Mailing Lists)" <matt.baluyos.lists@xxxxxxxxx>]

Hello everyone,

I've been getting a bit of these error messages lately. Anyone know
what this means? Is this a problem on our end or theirs? (I'd like to
think it's on theirs because we haven't had any problems with
receiving any other fax)

We have a fax-to-email system setup using HylaFAX on an ISDN line.

<quote>
Errors were received:
May 29 14:24:07.18: [ 2295]: SESSION BEGIN 000000613 61282809700 May
29 14:24:07.18: [ 2295]: HylaFAX (tm) Version 4.3.2 May 29
14:24:07.18: [ 2295]: CallID: "" "82809700"
May 29 14:24:07.18: [ 2295]: <-- [4:ATA\r] May 29 14:24:22.96: [
2295]: --> [5:+FCON] May 29 14:24:22.96: [ 2295]: ANSWER: FAX
CONNECTION  DEVICE '/dev/ttyds1'
May 29 14:24:22.96: [ 2295]: RECV FAX: begin
May 29 14:24:22.97: [ 2295]: --> [26:+FTSI:         DOW CORNING]
May 29 14:24:22.97: [ 2295]: REMOTE TSI "DOW CORNING"
May 29 14:24:22.97: [ 2295]: --> [22:+FDCS: 1,5,0,2,0,2,0,0] May 29
14:24:22.97: [ 2295]: REMOTE wants 14400 bit/s May 29 14:24:22.97: [
2295]: REMOTE wants A4 page width (215 mm) May 29 14:24:22.97: [
2295]: REMOTE wants unlimited page length May 29 14:24:22.97: [ 2295]:
REMOTE wants 7.7 line/mm May 29 14:24:22.97: [ 2295]: REMOTE wants 1-D
MH May 29 14:24:22.97: [ 2295]: REMOTE wants T.30 Annex C, half duplex
ECM May 29 14:24:22.97: [ 2295]: --> [2:OK] May 29 14:24:22.97: [
2295]: <-- [7:AT+FDR\r] May 29 14:24:22.97: [ 2295]: --> [5:+FCFR] May
29 14:24:22.97: [ 2295]: --> [22:+FDCS: 1,5,0,2,0,2,0,0] May 29
14:24:22.97: [ 2295]: REMOTE wants 14400 bit/s May 29 14:24:22.97: [
2295]: REMOTE wants A4 page width (215 mm) May 29 14:24:22.97: [
2295]: REMOTE wants unlimited page length May 29 14:24:22.97: [ 2295]:
REMOTE wants 7.7 line/mm May 29 14:24:22.97: [ 2295]: REMOTE wants 1-D
MH May 29 14:24:22.97: [ 2295]: REMOTE wants T.30 Annex C, half duplex
ECM May 29 14:24:22.97: [ 2295]: --> [7:CONNECT] May 29 14:24:22.97: [
2295]: RECV: begin page May 29 14:24:22.97: [ 2295]: RECV: send
trigger 021 May 29 14:24:22.97: [ 2295]: <-- data [1] May 29
14:24:22.97: [ 2295]: Copy quality checking performed by host May 29
14:24:34.48: [ 2295]: RECV: 32694 bytes of data, 939 total lines May
29 14:24:43.10: [ 2295]: RECV: 32712 bytes of data, 2064 total lines
May 29 14:24:44.33: [ 2295]: RECV: 1923 bytes of data, 2164 total
lines May 29 14:24:44.33: [ 2295]: --> [13:+FPTS: 1,2160] May 29
14:24:44.33: [ 2295]: --> [7:+FET: 0] May 29 14:24:44.33: [ 2295]:
RECV recv MPS (more pages, same document) May 29 14:24:44.33: [ 2295]:
--> [2:OK] May 29 14:24:44.33: [ 2295]: RECV send MCF (message
confirmation) May 29 14:24:44.33: [ 2295]: RECV FAX (000000613): from
DOW CORNING, page 1 in 0:22, INF, 7.7 line/mm, 1-D MH, 14400 bit/s May
29 14:24:44.33: [ 2295]: <-- [7:AT+FDR\r] May 29 14:24:44.33: [ 2295]:
--> [7:CONNECT] May 29 14:24:44.33: [ 2295]: RECV: begin page May 29
14:24:44.33: [ 2295]: RECV: send trigger 021 May 29 14:24:44.33: [
2295]: <-- data [1] May 29 14:24:44.33: [ 2295]: Copy quality checking
performed by host May 29 14:25:44.34: [ 2295]: <-- data [1] May 29
14:25:44.34: [ 2295]: RECV: Missing EOL after 5 seconds May 29
14:25:44.34: [ 2295]: REMOTE HANGUP: Missing EOL after 5 seconds
(section 3.2/T.4) (code 91) May 29 14:25:44.34: [ 2295]: RECV FAX
(000000613): recvq/fax000000335.tif from DOW CORNING, route to
<unspecified>, 1 pages in 1:22 May 29 14:25:44.34: [ 2295]: RECV FAX:
Missing EOL after 5 seconds (section 3.2/T.4) May 29 14:25:44.34: [
2295]: <-- [6:AT+FK\r] May 29 14:26:14.34: [ 2295]: MODEM <Timeout>
May 29 14:26:14.34: [ 2295]: RECV FAX (000000613): session with DOW
CORNING terminated abnormally: Missing EOL after 5 seconds (section
3.2/T.4) May 29 14:26:14.34: [ 2295]: RECV FAX: bin/faxrcvd
"recvq/fax000000335.tif" "ttyds1" "000000613" "Missing EOL after 5
seconds (section 3.2/T.4)" "" "82809700"
May 29 14:26:14.34: [ 2295]: RECV FAX: end May 29 14:26:14.34: [
2295]: SESSION END
</quote>

--
Stand before it and there is no beginning.
Follow it and there is no end.
Stay with the ancient Tao,
Move with the present.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*