Re: [hylafax-users] caller id help needed please

["Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Michael,

http://www.hylafax.org/content/Handbook:Advanced_Server_Configuration:Caller
-ID

From this you will see that you need to set two additional parameters (the
exact format will depend on your modem and can be found in the modem user
manual);

CIDNumber: "NMBR="
CIDName: "NAME="

The modem must also answer after a minimum of two rings if you are using a
Caller ID system which delivers data between the first and second rings (USA
for instance).

RingsBeforeAnswer: 2

Regards

ANDREW RINALDI
Mainpine Limited - Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Michael Hallager
Sent: 07 May 2007 05:26
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] caller id help needed please

I'm using a USR 56k fax modem in class 1.

I have tested using Minicom that the modem is CLID capable and this works
with 
AT#CID=1.

Problem is that the CLID is not showing in the log files.

Based on previous posts to this forum I tried adding the following to 
config.ttyS1
ModemResetCmds:         AT#CID=1

and this has not fixed the problem.

Michael Hallager
net trust ltd
www.networkstuff.co.nz p.09 839-1000

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*