Re: [hylafax-users] Addmodem script produces incorrect results

To: Kevin Hilton <kev_hilton@xxxxxxxxxxx>
Subject: Re: [hylafax-users] Addmodem script produces incorrect results
From: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
Cc: hylafax-users@xxxxxxxxxxx
Date: Fri, 04 May 2007 09:36:17 -0700

Kevin Hilton wrote:

May 03 12:03:43.46: [14419]: DELAY 70 ms
May 03 12:03:43.53: [14419]: <-- [9:AT+FTH=3\r]
May 03 12:03:43.53: [14419]: MODEM WRITE ERROR: errno 5

Errno 5 is "I/O error".

If this is completely reproducible then something is wrong with your modem driver, the serial driver (which may not be applicable in this Linmodem case), the hardware, or the hardware configuration. However, *something* is malfunctioning.

Lee.

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*

References:
- [hylafax-users] Addmodem script produces incorrect results
  - From: Kevin Hilton

Prev by Date: Re: [hylafax-users] ratio DONE/FAILED
Next by Date: [hylafax-users] Resending a fax
Previous by thread: Re: [hylafax-users] Addmodem script produces incorrect results
Next by thread: [hylafax-users] Decrease error check will prevent T.30 T2 timeout error ?
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions