[hylafax-users] Cannot recieve from certain senders

[johnh@xxxxxxxxxxxxxxxxx]

Greetings,

My Setup: Hylafax 4.3.3 on Fedora Core 6 x64, 4 Modems, all MODEM LT V.90 
1.0 MT5634ZBA SERIAL DATA/FAX MODEM VERSION 8.19J, Digi Xp serial card.

The problem:

Previously, I had enabled Class1TCFRecvHack to allow certain senders to 
send to us, but that ended up causing other senders to fail. 

It was suggested that I disable it and then post logs from the senders 
that couldn't send without it, so here is an example of a sender that 
doesn't work without Class1TCFRecvHack enabled:

May 01 09:20:53.40: [13564]: SESSION BEGIN 000000929 MYFAXNUMBER
May 01 09:20:53.40: [13564]: HylaFAX (tm) Version 4.3.3
May 01 09:20:53.40: [13564]: <-- [4:ATA\r]
May 01 09:20:59.49: [13564]: --> [7:CONNECT]
May 01 09:20:59.49: [13564]: ANSWER: FAX CONNECTION  DEVICE 
'/dev/ttyG0_00'
May 01 09:20:59.49: [13564]: RECV FAX: begin
May 01 09:20:59.49: [13564]: <-- data [32]
May 01 09:20:59.49: [13564]: <-- data [2]
May 01 09:20:59.53: [13564]: --> [7:CONNECT]
May 01 09:20:59.53: [13564]: <-- data [23]
May 01 09:20:59.53: [13564]: <-- data [2]
May 01 09:20:59.57: [13564]: --> [7:CONNECT]
May 01 09:20:59.57: [13564]: <-- data [13]
May 01 09:20:59.57: [13564]: <-- data [2]
May 01 09:21:01.76: [13564]: --> [2:OK]
May 01 09:21:01.76: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:01.97: [13564]: --> [7:CONNECT]
May 01 09:21:03.70: [13564]: --> [2:OK]
May 01 09:21:03.70: [13564]: REMOTE TSI "SENDERSFAXNUMBER"
May 01 09:21:03.70: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:03.72: [13564]: --> [7:CONNECT]
May 01 09:21:04.19: [13564]: --> [2:OK]
May 01 09:21:04.19: [13564]: REMOTE wants 14400 bit/s
May 01 09:21:04.19: [13564]: REMOTE wants A4 page width (215 mm)
May 01 09:21:04.19: [13564]: REMOTE wants unlimited page length
May 01 09:21:04.19: [13564]: REMOTE wants 3.85 line/mm
May 01 09:21:04.19: [13564]: REMOTE wants 2-D MMR
May 01 09:21:04.19: [13564]: REMOTE wants T.30 Annex A, 256-byte ECM
May 01 09:21:04.19: [13564]: RECV training at v.17 14400 bit/s
May 01 09:21:04.19: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:04.27: [13564]: --> [8:+FCERROR]
May 01 09:21:04.27: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:04.34: [13564]: --> [8:+FCERROR]
May 01 09:21:04.34: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:04.80: [13564]: --> [7:CONNECT]
May 01 09:21:05.11: [13564]: --> [10:NO CARRIER]
May 01 09:21:05.11: [13564]: MODEM No carrier
May 01 09:21:05.11: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:05.19: [13564]: --> [2:OK]
May 01 09:21:05.19: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:06.07: [13564]: --> [7:CONNECT]
May 01 09:21:06.07: [13564]: <-- data [3]
May 01 09:21:06.07: [13564]: <-- data [2]
May 01 09:21:06.40: [13564]: --> [2:OK]
May 01 09:21:06.40: [13564]: RECV send CRP (command repeat)
May 01 09:21:06.40: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:06.68: [13564]: --> [7:CONNECT]
May 01 09:21:06.92: [13564]: --> [10:NO CARRIER]
May 01 09:21:06.92: [13564]: MODEM No carrier
May 01 09:21:06.92: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:07.01: [13564]: --> [2:OK]
May 01 09:21:07.01: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:07.89: [13564]: --> [7:CONNECT]
May 01 09:21:07.89: [13564]: <-- data [3]
May 01 09:21:07.89: [13564]: <-- data [2]
May 01 09:21:08.23: [13564]: --> [2:OK]
May 01 09:21:08.23: [13564]: RECV send CRP (command repeat)
May 01 09:21:08.23: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:08.44: [13564]: --> [7:CONNECT]
May 01 09:21:10.18: [13564]: --> [2:OK]
May 01 09:21:10.18: [13564]: REMOTE TSI "SENDERSFAXNUMBER"
May 01 09:21:10.18: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:10.20: [13564]: --> [7:CONNECT]
May 01 09:21:10.67: [13564]: --> [2:OK]
May 01 09:21:10.67: [13564]: REMOTE wants 14400 bit/s
May 01 09:21:10.67: [13564]: REMOTE wants A4 page width (215 mm)
May 01 09:21:10.67: [13564]: REMOTE wants unlimited page length
May 01 09:21:10.67: [13564]: REMOTE wants 3.85 line/mm
May 01 09:21:10.67: [13564]: REMOTE wants 2-D MMR
May 01 09:21:10.67: [13564]: REMOTE wants T.30 Annex A, 256-byte ECM
May 01 09:21:10.67: [13564]: RECV training at v.17 14400 bit/s
May 01 09:21:10.67: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:10.75: [13564]: --> [8:+FCERROR]
May 01 09:21:10.75: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:10.82: [13564]: --> [8:+FCERROR]
May 01 09:21:10.82: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:11.28: [13564]: --> [7:CONNECT]
May 01 09:21:11.58: [13564]: --> [10:NO CARRIER]
May 01 09:21:11.58: [13564]: MODEM No carrier
May 01 09:21:11.58: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:11.67: [13564]: --> [2:OK]
May 01 09:21:11.67: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:12.54: [13564]: --> [7:CONNECT]
May 01 09:21:12.54: [13564]: <-- data [3]
May 01 09:21:12.54: [13564]: <-- data [2]
May 01 09:21:12.86: [13564]: --> [2:OK]
May 01 09:21:12.86: [13564]: RECV send CRP (command repeat)
May 01 09:21:12.86: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:13.32: [13564]: --> [7:CONNECT]
May 01 09:21:13.37: [13564]: --> [10:NO CARRIER]
May 01 09:21:13.37: [13564]: MODEM No carrier
May 01 09:21:13.37: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:13.45: [13564]: --> [2:OK]
May 01 09:21:13.45: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:14.32: [13564]: --> [7:CONNECT]
May 01 09:21:14.32: [13564]: <-- data [3]
May 01 09:21:14.32: [13564]: <-- data [2]
May 01 09:21:14.64: [13564]: --> [2:OK]
May 01 09:21:14.64: [13564]: RECV send CRP (command repeat)
May 01 09:21:14.64: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:14.86: [13564]: --> [7:CONNECT]
May 01 09:21:16.60: [13564]: --> [2:OK]
May 01 09:21:16.60: [13564]: REMOTE TSI "SENDERSFAXNUMBER"
May 01 09:21:16.60: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:16.62: [13564]: --> [7:CONNECT]
May 01 09:21:17.09: [13564]: --> [2:OK]
May 01 09:21:17.09: [13564]: REMOTE wants 14400 bit/s
May 01 09:21:17.09: [13564]: REMOTE wants A4 page width (215 mm)
May 01 09:21:17.09: [13564]: REMOTE wants unlimited page length
May 01 09:21:17.09: [13564]: REMOTE wants 3.85 line/mm
May 01 09:21:17.09: [13564]: REMOTE wants 2-D MMR
May 01 09:21:17.09: [13564]: REMOTE wants T.30 Annex A, 256-byte ECM
May 01 09:21:17.09: [13564]: RECV training at v.17 14400 bit/s
May 01 09:21:17.09: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:17.16: [13564]: --> [8:+FCERROR]
May 01 09:21:17.16: [13564]: <-- [11:AT+FRM=145\r]
May 01 09:21:17.24: [13564]: --> [8:+FCERROR]
May 01 09:21:17.24: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:17.70: [13564]: --> [7:CONNECT]
May 01 09:21:18.00: [13564]: --> [10:NO CARRIER]
May 01 09:21:18.00: [13564]: MODEM No carrier
May 01 09:21:18.00: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:18.08: [13564]: --> [2:OK]
May 01 09:21:18.08: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:18.96: [13564]: --> [7:CONNECT]
May 01 09:21:18.96: [13564]: <-- data [3]
May 01 09:21:18.96: [13564]: <-- data [2]
May 01 09:21:19.29: [13564]: --> [2:OK]
May 01 09:21:19.29: [13564]: RECV send CRP (command repeat)
May 01 09:21:19.29: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:20.14: [13564]: --> [7:CONNECT]
May 01 09:21:20.37: [13564]: --> [5:ERROR]
May 01 09:21:20.37: [13564]: MODEM Command error
May 01 09:21:20.37: [13564]: FCS error
May 01 09:21:20.37: [13564]: <-- [9:AT+FRS=7\r]
May 01 09:21:20.49: [13564]: --> [2:OK]
May 01 09:21:20.49: [13564]: <-- [9:AT+FTH=3\r]
May 01 09:21:21.36: [13564]: --> [7:CONNECT]
May 01 09:21:21.36: [13564]: <-- data [3]
May 01 09:21:21.36: [13564]: <-- data [2]
May 01 09:21:21.68: [13564]: --> [2:OK]
May 01 09:21:21.68: [13564]: RECV send CRP (command repeat)
May 01 09:21:21.68: [13564]: <-- [9:AT+FRH=3\r]
May 01 09:21:21.89: [13564]: --> [7:CONNECT]
May 01 09:21:23.09: [13564]: --> [2:OK]
May 01 09:21:23.09: [13564]: RECV FAX: RSPREC error/got DCN
May 01 09:21:23.09: [13564]: RECV FAX: end
May 01 09:21:23.09: [13564]: SESSION END

Thanks,

-John

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*