Re: [hylafax-users] DIS/DTC received 3 times; DCS not recognized

To: "'Antonio Almodóvar'" <adalmodovar@xxxxxxxxx>, <hylafax-users@xxxxxxxxxxx>
Subject: Re: [hylafax-users] DIS/DTC received 3 times; DCS not recognized
From: "Andrew Rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>
Reply-to: <andrew.rinaldi@xxxxxxxxxxxx>
Date: Wed, 25 Apr 2007 11:00:50 +0100
Hi Antonio,

Which modem are you using ?  Do you know what machine you are sending to ?
Are they using VoIP ?

Regards

ANDREW RINALDI
Mainpine Limited - Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com


-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Antonio Almodóvar
Sent: 25 April 2007 10:18
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] DIS/DTC received 3 times; DCS not recognized

Hi all.

We have problems sending faxes to a specific fax destination.
The session log:

Mar 02 11:22:27.44: [23472]: SESSION BEGIN 000000015 XXXXXXXXXX
Mar 02 11:22:27.44: [23472]: HylaFAX (tm) Version 5.0.4
Mar 02 11:22:27.44: [23472]: SEND FAX: JOB 3 DEST 965110669 COMMID
000000015 DEVICE '/dev/ttyPS0' FROM 'root <root@dddddddddddddddddd>'
USER root
Mar 02 11:22:27.44: [23472]: STATE CHANGE: RUNNING -> SENDING
Mar 02 11:22:27.44: [23472]: <-- [14:AT+FCLASS=1.0\r]
Mar 02 11:22:27.45: [23472]: --> [2:OK]
Mar 02 11:22:27.45: [23472]: DIAL xxxxxxxxxx
Mar 02 11:22:27.45: [23472]: <-- [14:ATDTxxxxxxxxx\r]
Mar 02 11:22:44.29: [23472]: --> [7:CONNECT]
Mar 02 11:22:46.00: [23472]: --> HDLC<25:FF C0 02 9C 6C 6C 0C 8C 8C AC
6C 9C 04 04 04 04 04 04 04 04 04 04 04 E0 EF>
Mar 02 11:22:46.00: [23472]: --> [2:OK]
Mar 02 11:22:46.00: [23472]: REMOTE CSI "xxxxxxxxx"
Mar 02 11:22:46.00: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:22:46.01: [23472]: --> [7:CONNECT]
Mar 02 11:22:46.38: [23472]: --> HDLC<12:FF C8 01 00 72 1F 01 01 01 80 B1
C7>
Mar 02 11:22:46.38: [23472]: --> [2:OK]
Mar 02 11:22:46.38: [23472]: REMOTE best rate 9600 bit/s
Mar 02 11:22:46.38: [23472]: REMOTE max A4 page width (215 mm)
Mar 02 11:22:46.38: [23472]: REMOTE max unlimited page length
Mar 02 11:22:46.38: [23472]: REMOTE best vres 7.7 line/mm
Mar 02 11:22:46.38: [23472]: REMOTE format support: MH
Mar 02 11:22:46.38: [23472]: REMOTE best 0 ms/scanline
Mar 02 11:22:46.38: [23472]: USE 9600 bit/s
Mar 02 11:22:46.38: [23472]: SEND file "docq/doc3.ps;00"
Mar 02 11:22:46.38: [23472]: USE A4 page width (215 mm)
Mar 02 11:22:46.38: [23472]: USE unlimited page length
Mar 02 11:22:46.38: [23472]: USE 3.85 line/mm
Mar 02 11:22:46.38: [23472]: USE 1-D MH
Mar 02 11:22:46.38: [23472]: USE 0 ms/scanline
Mar 02 11:22:46.38: [23472]: SEND training at v.29 9600 bit/s
Mar 02 11:22:46.38: [23472]: <-- [9:AT+FRS=7\r]
Mar 02 11:22:46.46: [23472]: --> [2:OK]
Mar 02 11:22:46.46: [23472]: <-- [9:AT+FTH=3\r]
Mar 02 11:22:47.42: [23472]: --> [7:CONNECT]
Mar 02 11:22:47.42: [23472]: <-- HDLC<23:FF C0 C2 CA 82 72 92 CA A2 4A
04 B2 CA 04 04 04 04 04 04 04 04 04 04>
Mar 02 11:22:47.42: [23472]: <-- data [23]
Mar 02 11:22:47.42: [23472]: <-- data [2]
Mar 02 11:22:47.43: [23472]: --> [7:CONNECT]
Mar 02 11:22:47.43: [23472]: <-- HDLC<6:FF C8 C1 00 60 1E>
Mar 02 11:22:47.43: [23472]: <-- data [6]
Mar 02 11:22:47.43: [23472]: <-- data [2]
Mar 02 11:22:48.59: [23472]: --> [2:OK]
Mar 02 11:22:48.59: [23472]: <-- [9:AT+FTS=7\r]
Mar 02 11:22:48.64: [23472]: --> [2:OK]
Mar 02 11:22:48.64: [23472]: <-- [10:AT+FTM=96\r]
Mar 02 11:22:48.65: [23472]: --> [7:CONNECT]
Mar 02 11:22:48.65: [23472]: DELAY 400 ms
Mar 02 11:22:49.05: [23472]: <-- data [1024]
Mar 02 11:22:49.05: [23472]: <-- data [776]
Mar 02 11:22:49.05: [23472]: <-- data [2]
Mar 02 11:22:50.62: [23472]: --> [2:OK]
Mar 02 11:22:50.62: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:22:53.72: [23472]: --> [0:]
Mar 02 11:22:53.72: [23472]: MODEM <Empty line>
Mar 02 11:22:53.72: [23472]: MODEM TIMEOUT: waiting for v.21 carrier
Mar 02 11:22:53.72: [23472]: <-- data [1]
Mar 02 11:22:53.73: [23472]: --> [2:]
Mar 02 11:22:53.73: [23472]: --> [2:OK]
Mar 02 11:22:53.73: [23472]: <-- [9:AT+FRS=7\r]
Mar 02 11:22:53.80: [23472]: --> [2:OK]
Mar 02 11:22:53.80: [23472]: SEND training at v.29 7200 bit/s
Mar 02 11:22:53.80: [23472]: <-- [9:AT+FTH=3\r]
Mar 02 11:22:54.76: [23472]: --> [7:CONNECT]
Mar 02 11:22:54.76: [23472]: <-- HDLC<23:FF C0 C2 CA 82 72 92 CA A2 4A
04 B2 CA 04 04 04 04 04 04 04 04 04 04>
Mar 02 11:22:54.76: [23472]: <-- data [23]
Mar 02 11:22:54.76: [23472]: <-- data [2]
Mar 02 11:22:54.77: [23472]: --> [7:CONNECT]
Mar 02 11:22:54.77: [23472]: <-- HDLC<6:FF C8 C1 00 70 1E>
Mar 02 11:22:54.77: [23472]: <-- data [6]
Mar 02 11:22:54.77: [23472]: <-- data [2]
Mar 02 11:22:55.93: [23472]: --> [2:OK]
Mar 02 11:22:55.93: [23472]: <-- [9:AT+FTS=7\r]
Mar 02 11:22:55.99: [23472]: --> [2:OK]
Mar 02 11:22:55.99: [23472]: <-- [10:AT+FTM=72\r]
Mar 02 11:22:56.00: [23472]: --> [7:CONNECT]
Mar 02 11:22:56.00: [23472]: DELAY 400 ms
Mar 02 11:22:56.40: [23472]: <-- data [1024]
Mar 02 11:22:56.40: [23472]: <-- data [326]
Mar 02 11:22:56.40: [23472]: <-- data [2]
Mar 02 11:22:57.96: [23472]: --> [2:OK]
Mar 02 11:22:57.96: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:22:59.21: [23472]: --> [7:CONNECT]
Mar 02 11:23:01.10: [23472]: --> HDLC<25:FF C0 02 9C 6C 6C 0C 8C 8C AC
6C 9C 04 04 04 04 04 04 04 04 04 04 04 E0 EF>
Mar 02 11:23:01.10: [23472]: --> [2:OK]
Mar 02 11:23:01.10: [23472]: REMOTE CSI "xxxxxxxxx"
Mar 02 11:23:01.10: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:23:01.11: [23472]: --> [7:CONNECT]
Mar 02 11:23:01.48: [23472]: --> HDLC<12:FF C8 01 00 72 1F 01 01 01 80 B1
C7>
Mar 02 11:23:01.48: [23472]: --> [2:OK]
Mar 02 11:23:01.48: [23472]: SEND training at v.29 7200 bit/s
Mar 02 11:23:01.48: [23472]: <-- [9:AT+FRS=7\r]
Mar 02 11:23:01.56: [23472]: --> [2:OK]
Mar 02 11:23:01.56: [23472]: <-- [9:AT+FTH=3\r]
Mar 02 11:23:02.52: [23472]: --> [7:CONNECT]
Mar 02 11:23:02.52: [23472]: <-- HDLC<23:FF C0 C2 CA 82 72 92 CA A2 4A
04 B2 CA 04 04 04 04 04 04 04 04 04 04>
Mar 02 11:23:02.52: [23472]: <-- data [23]
Mar 02 11:23:02.52: [23472]: <-- data [2]
Mar 02 11:23:02.53: [23472]: --> [7:CONNECT]
Mar 02 11:23:02.53: [23472]: <-- HDLC<6:FF C8 C1 00 70 1E>
Mar 02 11:23:02.53: [23472]: <-- data [6]
Mar 02 11:23:02.53: [23472]: <-- data [2]
Mar 02 11:23:03.69: [23472]: --> [2:OK]
Mar 02 11:23:03.69: [23472]: <-- [9:AT+FTS=7\r]
Mar 02 11:23:03.74: [23472]: --> [2:OK]
Mar 02 11:23:03.74: [23472]: <-- [10:AT+FTM=72\r]
Mar 02 11:23:03.75: [23472]: --> [7:CONNECT]
Mar 02 11:23:03.75: [23472]: DELAY 400 ms
Mar 02 11:23:04.15: [23472]: <-- data [1024]
Mar 02 11:23:04.15: [23472]: <-- data [326]
Mar 02 11:23:04.15: [23472]: <-- data [2]
Mar 02 11:23:05.72: [23472]: --> [2:OK]
Mar 02 11:23:05.72: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:23:06.90: [23472]: --> [7:CONNECT]
Mar 02 11:23:08.79: [23472]: --> HDLC<25:FF C0 02 9C 6C 6C 0C 8C 8C AC
6C 9C 04 04 04 04 04 04 04 04 04 04 04 E0 EF>
Mar 02 11:23:08.79: [23472]: --> [2:OK]
Mar 02 11:23:08.79: [23472]: REMOTE CSI "xxxxxxxxx"
Mar 02 11:23:08.79: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:23:08.80: [23472]: --> [7:CONNECT]
Mar 02 11:23:09.17: [23472]: --> HDLC<12:FF C8 01 00 72 1F 01 01 01 80 B1
C7>
Mar 02 11:23:09.17: [23472]: --> [2:OK]
Mar 02 11:23:09.17: [23472]: SEND training at v.29 7200 bit/s
Mar 02 11:23:09.17: [23472]: <-- [9:AT+FRS=7\r]
Mar 02 11:23:09.25: [23472]: --> [2:OK]
Mar 02 11:23:09.25: [23472]: <-- [9:AT+FTH=3\r]
Mar 02 11:23:10.21: [23472]: --> [7:CONNECT]
Mar 02 11:23:10.21: [23472]: <-- HDLC<23:FF C0 C2 CA 82 72 92 CA A2 4A
04 B2 CA 04 04 04 04 04 04 04 04 04 04>
Mar 02 11:23:10.21: [23472]: <-- data [23]
Mar 02 11:23:10.21: [23472]: <-- data [2]
Mar 02 11:23:10.22: [23472]: --> [7:CONNECT]
Mar 02 11:23:10.22: [23472]: <-- HDLC<6:FF C8 C1 00 70 1E>
Mar 02 11:23:10.22: [23472]: <-- data [6]
Mar 02 11:23:10.22: [23472]: <-- data [2]
Mar 02 11:23:11.38: [23472]: --> [2:OK]
Mar 02 11:23:11.38: [23472]: <-- [9:AT+FTS=7\r]
Mar 02 11:23:11.43: [23472]: --> [2:OK]
Mar 02 11:23:11.43: [23472]: <-- [10:AT+FTM=72\r]
Mar 02 11:23:11.44: [23472]: --> [7:CONNECT]
Mar 02 11:23:11.44: [23472]: DELAY 400 ms
Mar 02 11:23:11.84: [23472]: <-- data [1024]
Mar 02 11:23:11.84: [23472]: <-- data [326]
Mar 02 11:23:11.84: [23472]: <-- data [2]
Mar 02 11:23:13.41: [23472]: --> [2:OK]
Mar 02 11:23:13.41: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:23:16.42: [23472]: --> [7:CONNECT]
Mar 02 11:23:18.29: [23472]: --> HDLC<25:FF C0 02 9C 6C 6C 0C 8C 8C AC
6C 9C 04 04 04 04 04 04 04 04 04 04 04 E0 EF>
Mar 02 11:23:18.29: [23472]: --> [2:OK]
Mar 02 11:23:18.29: [23472]: REMOTE CSI "xxxxxxxxx"
Mar 02 11:23:18.29: [23472]: <-- [9:AT+FRH=3\r]
Mar 02 11:23:18.30: [23472]: --> [7:CONNECT]
Mar 02 11:23:18.67: [23472]: --> HDLC<12:FF C8 01 00 72 1F 01 01 01 80 B1
C7>
Mar 02 11:23:18.67: [23472]: --> [2:OK]
Mar 02 11:23:18.67: [23472]: DIS/DTC received 3 times; DCS not recognized
Mar 02 11:23:18.67: [23472]: <-- [9:AT+FRS=7\r]
Mar 02 11:23:18.75: [23472]: --> [2:OK]
Mar 02 11:23:18.75: [23472]: <-- [9:AT+FTH=3\r]
Mar 02 11:23:19.71: [23472]: --> [7:CONNECT]
Mar 02 11:23:19.71: [23472]: <-- HDLC<3:FF C8 DF>
Mar 02 11:23:19.71: [23472]: <-- data [3]
Mar 02 11:23:19.71: [23472]: <-- data [2]
Mar 02 11:23:20.10: [23472]: --> [2:OK]
Mar 02 11:23:20.10: [23472]: MODEM input buffering enabled
Mar 02 11:23:20.10: [23472]: <-- [5:ATH0\r]
Mar 02 11:23:20.44: [23472]: --> [2:OK]
Mar 02 11:23:20.44: [23472]: MODEM set DTR OFF
Mar 02 11:23:20.44: [23472]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Mar 02 11:23:20.44: [23472]: SESSION END


We have not been able to send any fax to this destination.
The modem is configured as class 1 one.

Thanks in advance.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
References:
- [hylafax-users] DIS/DTC received 3 times; DCS not recognized
  - From: Antonio Almodóvar
Prev by Date: Re: [hylafax-users] fax machines lose page information
Next by Date: Re: [hylafax-users] DIS/DTC received 3 times; DCS not recognized
Previous by thread: [hylafax-users] DIS/DTC received 3 times; DCS not recognized
Next by thread: Re: [hylafax-users] DIS/DTC received 3 times; DCS not recognized
Index(es):
- Main
- Thread
Project hosted by iFAX Solutions