 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
[hylafax-users] T.30 T2 timeout, expected page not received
- To: hylafax-users@xxxxxxxxxxx
- Subject: [hylafax-users] T.30 T2 timeout, expected page not received
- From: Disaster <sghebuz@xxxxxxxxx>
- Date: Thu, 12 Apr 2007 10:26:29 +0200
Dear all, I'm always experiencing the same problem when receiving a fax from a client: some times I'm unable to receive anything with error "COMREC received DCN" and when I'm "lucky" I receive the first page and then "T.30 T2 timeout, expected page not received". I'm running hylafax 4.3.3 on Gentoo with a LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m modem (the usb multitech modem that iFax sells). The remote machine is a fax-server named "TI-FAX" (http://www.tinet.it/it/prodotti/tifax.htm) with some tricom modems. Please see the attached log files and tell me if you need anything else. many thanks Andrea Soster
# $Id: lucent-mt-10,v 1.8 2005/12/05 15:48:54 darren Exp $ # # prototype config for MultiTech 5634-series modems using # the Lucent/Agere chipset supporting V.34-Fax. # # CountryCode: 0039 AreaCode: 0424 FAXNumber: +39.******** LongDistancePrefix: 0 InternationalPrefix: 0 DialStringRules: etc/dialrules.europe ServerTracing: 0xFFF #1 no debug SessionTracing: 0xFFFFFFFF #11 RecvFileMode: 0666 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: ** TagLineFont: etc/lutRS18.pcf TagLineFormat: ** PercentGoodLines: 90 MaxRecvPages: 30 # ModemType: Class1.0 # use this to supply a hint ModemRate: 57600 # must be at least as fast as the DCE-DCE communication ModemFlowControl: rtscts # many firmwares have broken software flow control Class1EnableV34Cmd: AT+F34=14,1,2 # 33600-2400 primary, 2400-1200 control Class1TMConnectDelay: 400 # counteract quick CONNECT response # # Older firmwares on MainPine cards may require this: # Class1Cmd: AT+FCLASS=1 # # If your line supports Caller-ID, you may want to uncomment this... # ModemResetCmds: AT+VCID=1 # CallIDPattern: "NMBR=" # CallIDPattern: "NAME=" # Or with the MT5634ZBA-DID you'll probably need something like... # ModemReadyCmds: AT*DS1*DD0*DF1*DN4 # enable DTMF-DID, wink-start, 4 digits # CallIDPattern: "DTMF" # format of AT*DF1 # CallIDAnswerLength: 4 # four DTMF-DID digits then ATA #disabilito JBIG perche' non riesco ad aprire i TIFF con questa codifica Class1JBIGSupport: no
Apr 12 10:57:57 sludgefactory FaxGetty[9805]: STATE CHANGE: RUNNING -> LISTENING Apr 12 10:57:57 sludgefactory FaxGetty[9805]: --> [4:RING] Apr 12 10:57:57 sludgefactory FaxGetty[9805]: STATE CHANGE: LISTENING -> ANSWERING Apr 12 10:58:09 sludgefactory FaxGetty[9805]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyACM1' Apr 12 10:58:47 sludgefactory FaxGetty[14041]: RECV FAX (000046370): from , page 1 in 0:35, INF, 7.7 line/mm, 1-D MH, 9600 bit/s Apr 12 10:59:27 sludgefactory FaxGetty[14150]: RECV FAX (000046370): recvq/fax000036105.tif from , route to <unspecified>, 1 pages in 1:18 Apr 12 10:59:28 sludgefactory FaxGetty[9805]: RECV FAX (000046370): session with terminated abnormally: T.30 T2 timeout, expected page not received Apr 12 10:59:28 sludgefactory FaxGetty[9805]: RECV FAX: bin/faxrcvd "recvq/fax000036105.tif" "ttyACM1" "000046370" "T.30 T2 timeout, expected page not received" Apr 12 10:59:28 sludgefactory FaxGetty[9805]: <-- [5:ATH0\r] Apr 12 10:59:28 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:28 sludgefactory FaxGetty[9805]: MODEM set DTR OFF ## Don't know if this is related or not ### Apr 12 10:59:29 sludgefactory FaxGetty[9805]: MODEM set DTR OFF Apr 12 10:59:29 sludgefactory FaxGetty[9805]: DELAY 75 ms Apr 12 10:59:30 sludgefactory FaxGetty[9805]: MODEM set DTR ON Apr 12 10:59:30 sludgefactory FaxGetty[9805]: DELAY 2600 ms Apr 12 10:59:33 sludgefactory FaxGetty[9805]: MODEM set baud rate: 57600 baud, input flow RTS/CTS, output flow RTS/CTS Apr 12 10:59:33 sludgefactory FaxGetty[9805]: DELAY 10 ms Apr 12 10:59:33 sludgefactory FaxGetty[9805]: MODEM flush i/o Apr 12 10:59:33 sludgefactory FaxGetty[9805]: <-- [4:ATZ\r] Apr 12 10:59:34 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:34 sludgefactory FaxGetty[9805]: DELAY 3000 ms Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM flush i/o Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [7:ATS0=0\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [6:ATS0=0] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [5:ATE0\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [4:ATE0] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [5:ATV1\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [5:ATQ0\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [7:ATS8=2\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [8:ATS7=60\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [12:AT+FCLASS=?\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [19:0,1,1.0,2,2.0,2.1,8] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Data" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Class 1" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Class 2" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Class 2.0" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Class 1.0" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Class 2.1" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: MODEM Supports "Voice" Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [14:AT+FCLASS=1.0\r] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:37 sludgefactory FaxGetty[9805]: <-- [5:ATI3\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [72:LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM: Mfr LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m Apr 12 10:59:38 sludgefactory FaxGetty[9805]: <-- [5:ATI0\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [72:LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM: Model LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m Apr 12 10:59:38 sludgefactory FaxGetty[9805]: <-- [9:AT+FTM=?\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 3.85 line/mm Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 7.7 line/mm Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 15.4 line/mm Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports R16 x 15.4 line/mm Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 200 x 100 dpi Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 200 x 200 dpi Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 200 x 400 dpi Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 300 x 300 dpi Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 2400 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 4800 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 7200 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 9600 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 12000 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 14400 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 16800 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 19200 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 21600 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 24000 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 26400 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 28800 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 31200 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 33600 bit/s Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports A4 page width (215 mm) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports B4 page width (255 mm) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports A3 page width (303 mm) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports A4 page length (297 mm) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports B4 page length (364 mm) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports unlimited page length Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 1-D MH Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 2-D MR Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 2-D MMR Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports no ECM Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports T.30 Annex A, 64-byte ECM Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports T.30 Annex A, 256-byte ECM Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 0 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 5 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 10 ms, 5 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 10 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 20 ms, 10 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 20 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 40 ms, 20 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM Supports 40 ms/scanline Apr 12 10:59:38 sludgefactory FaxGetty[9805]: <-- [9:AT+FRM=?\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [41:3,24,48,72,73,74,96,97,98,121,122,145,146] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM LT V.92 1.0 MT5634ZBA-USB-V92 DATA/FAX MODEM (DUAL CONFIG) VERSION 2.27M LT V.92 1.0 MT5634ZBA-USB-V92 Data/Fax Modem (Dual Config) Version 2.27m/ Apr 12 10:59:38 sludgefactory FaxGetty[9805]: <-- [5:ATM0\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: <-- [14:AT+F34=14,1,2\r] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: --> [2:OK] Apr 12 10:59:38 sludgefactory FaxGetty[9805]: STATE CHANGE: RECEIVING -> RUNNING (timeout 30) Apr 12 10:59:38 sludgefactory FaxGetty[9805]: MODEM input buffering disabled
recvq/fax000036105.tif (ftp://sludgefactory:4559/recvq/fax000036105.tif): Mittente: Pagine: 1 Qualità: Fine Dimensione: North American Letter Ricevuto: 2007:04:12 10:58:17 Durata della ricezione: 0:35 Velocità di trasmissione: 9600 bit/s Formato dati: 1-D MH Correzione d'errore: No CallID1: CallID2: Ricevuto tramite: ttyACM1 Il documento non è stato completamente ricevuto perché: T.30 T2 timeout, expected page not received ---- Segue trascrizione della sessione ---- Apr 12 10:57:57.82: [ 9805]: SESSION BEGIN 000046370 39******** Apr 12 10:57:57.82: [ 9805]: HylaFAX (tm) Version 4.3.3 Apr 12 10:57:57.82: [ 9805]: <-- [4:ATA\r] Apr 12 10:58:09.26: [ 9805]: --> [7:CONNECT] Apr 12 10:58:09.26: [ 9805]: ANSWER: FAX CONNECTION DEVICE '/dev/ttyACM1' Apr 12 10:58:09.26: [ 9805]: STATE CHANGE: ANSWERING -> RECEIVING Apr 12 10:58:09.26: [ 9805]: RECV FAX: begin Apr 12 10:58:09.26: [ 9805]: <-- HDLC<32:FF C0 04 B5 00 AA 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 CC 74 CC> Apr 12 10:58:09.26: [ 9805]: <-- data [32] Apr 12 10:58:09.26: [ 9805]: <-- data [2] Apr 12 10:58:09.27: [ 9805]: --> [7:CONNECT] Apr 12 10:58:09.27: [ 9805]: <-- HDLC<23:FF C0 02 32 4A CA 04 F2 92 32 E2 F2 E4 32 32 82 22 04 04 04 04 04 04> Apr 12 10:58:09.27: [ 9805]: <-- data [23] Apr 12 10:58:09.27: [ 9805]: <-- data [2] Apr 12 10:58:09.27: [ 9805]: --> [7:CONNECT] Apr 12 10:58:09.27: [ 9805]: <-- HDLC<13:FF C8 01 00 77 5F 23 01 FB C1 01 01 18> Apr 12 10:58:09.27: [ 9805]: <-- data [13] Apr 12 10:58:09.27: [ 9805]: <-- data [2] Apr 12 10:58:11.67: [ 9805]: --> [2:OK] Apr 12 10:58:11.67: [ 9805]: <-- [9:AT+FRH=3\r] Apr 12 10:58:12.00: [ 9805]: --> [7:CONNECT] Apr 12 10:58:13.62: [ 9805]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 89 69> Apr 12 10:58:13.62: [ 9805]: --> [2:OK] Apr 12 10:58:13.62: [ 9805]: REMOTE TSI "" Apr 12 10:58:13.62: [ 9805]: <-- [9:AT+FRH=3\r] Apr 12 10:58:13.63: [ 9805]: --> [7:CONNECT] Apr 12 10:58:13.93: [ 9805]: --> HDLC<9:FF C8 C1 00 62 1F 00 67 9D> Apr 12 10:58:13.93: [ 9805]: --> [2:OK] Apr 12 10:58:13.93: [ 9805]: REMOTE wants 9600 bit/s Apr 12 10:58:13.93: [ 9805]: REMOTE wants A4 page width (215 mm) Apr 12 10:58:13.93: [ 9805]: REMOTE wants unlimited page length Apr 12 10:58:13.93: [ 9805]: REMOTE wants 7.7 line/mm Apr 12 10:58:13.93: [ 9805]: REMOTE wants 1-D MH Apr 12 10:58:13.93: [ 9805]: RECV training at v.29 9600 bit/s Apr 12 10:58:13.93: [ 9805]: <-- [10:AT+FRM=96\r] Apr 12 10:58:14.32: [ 9805]: --> [7:CONNECT] Apr 12 10:58:15.78: [ 9805]: RECV: TCF 1744 bytes, 0% non-zero, 1727 zero-run Apr 12 10:58:15.78: [ 9805]: --> [10:NO CARRIER] Apr 12 10:58:15.78: [ 9805]: <-- [9:AT+FRS=7\r] Apr 12 10:58:15.85: [ 9805]: --> [2:OK] Apr 12 10:58:15.85: [ 9805]: TRAINING succeeded Apr 12 10:58:15.85: [ 9805]: <-- [9:AT+FTH=3\r] Apr 12 10:58:16.81: [ 9805]: --> [7:CONNECT] Apr 12 10:58:16.81: [ 9805]: <-- HDLC<3:FF C8 21> Apr 12 10:58:16.81: [ 9805]: <-- data [3] Apr 12 10:58:16.81: [ 9805]: <-- data [2] Apr 12 10:58:17.30: [ 9805]: --> [2:OK] Apr 12 10:58:17.30: [ 9805]: <-- [10:AT+FRM=96\r] Apr 12 10:58:17.76: [ 9805]: --> [7:CONNECT] Apr 12 10:58:17.76: [ 9805]: MODEM input buffering enabled Apr 12 10:58:17.76: [ 9805]: RECV: begin page Apr 12 10:58:44.53: [ 9805]: RECV/CQ: Bad 1D pixel count, row 2179, got 0, expected 1728 Apr 12 10:58:44.53: [ 9805]: RECV/CQ: Bad 1D pixel count, row 2180, got 0, expected 1728 Apr 12 10:58:44.53: [ 9805]: RECV/CQ: Bad 1D pixel count, row 2181, got 0, expected 1728 Apr 12 10:58:44.53: [ 9805]: RECV/CQ: Bad 1D pixel count, row 2182, got 0, expected 1728 Apr 12 10:58:44.65: [ 9805]: RECV/CQ: Adjusting for RTC found at row 2179 Apr 12 10:58:44.65: [ 9805]: RECV: 2179 total lines, 0 bad lines, 0 consecutive bad lines Apr 12 10:58:44.65: [ 9805]: RECV: end page Apr 12 10:58:44.65: [ 9805]: --> [10:NO CARRIER] Apr 12 10:58:44.65: [ 9805]: <-- [9:AT+FRH=3\r] Apr 12 10:58:45.31: [ 9805]: --> [7:CONNECT] Apr 12 10:58:46.48: [ 9805]: --> HDLC<5:FF C8 F2 AC A0> Apr 12 10:58:46.48: [ 9805]: --> [2:OK] Apr 12 10:58:46.48: [ 9805]: RECV recv MPS (more pages, same document) Apr 12 10:58:46.48: [ 9805]: <-- [9:AT+FRS=7\r] Apr 12 10:58:46.66: [ 9805]: --> [2:OK] Apr 12 10:58:46.66: [ 9805]: <-- [9:AT+FTH=3\r] Apr 12 10:58:47.71: [ 9805]: --> [7:CONNECT] Apr 12 10:58:47.71: [ 9805]: RECV send MCF (message confirmation) Apr 12 10:58:47.71: [ 9805]: RECV FAX (000046370): from , page 1 in 0:35, INF, 7.7 line/mm, 1-D MH, 9600 bit/s Apr 12 10:58:47.71: [ 9805]: <-- HDLC<3:FF C8 31> Apr 12 10:58:47.71: [ 9805]: <-- data [3] Apr 12 10:58:47.71: [ 9805]: <-- data [2] Apr 12 10:58:48.28: [ 9805]: --> [2:OK] Apr 12 10:58:48.28: [ 9805]: <-- [10:AT+FRM=96\r] Apr 12 10:58:55.29: [ 9805]: MODEM TIMEOUT: reading line from modem Apr 12 10:58:55.29: [ 9805]: <-- data [1] Apr 12 10:58:55.40: [ 9805]: --> [2:] Apr 12 10:58:55.40: [ 9805]: --> [2:OK] Apr 12 10:58:55.40: [ 9805]: <-- [9:AT+FRH=3\r] Apr 12 10:58:56.05: [ 9805]: --> [7:CONNECT] Apr 12 10:58:56.91: [ 9805]: --> [2:10 03] Apr 12 10:58:56.91: [ 9805]: --> [10:NO CARRIER] Apr 12 10:58:56.91: [ 9805]: MODEM No carrier Apr 12 10:58:56.91: [ 9805]: <-- [9:AT+FRS=7\r] Apr 12 10:59:26.92: [ 9805]: MODEM TIMEOUT: reading line from modem Apr 12 10:59:26.92: [ 9805]: MODEM <Timeout> Apr 12 10:59:26.92: [ 9805]: <-- data [1] Apr 12 10:59:26.92: [ 9805]: --> [2:OK] Apr 12 10:59:26.92: [ 9805]: <-- data [1] Apr 12 10:59:27.12: [ 9805]: MODEM TIMEOUT: reading line from modem Apr 12 10:59:27.12: [ 9805]: MODEM <Timeout> Apr 12 10:59:27.12: [ 9805]: RECV FAX (000046370): recvq/fax000036105.tif from , route to <unspecified>, 1 pages in 1:18 Apr 12 10:59:27.12: [ 9805]: RECV FAX: T.30 T2 timeout, expected page not received Apr 12 10:59:27.13: [ 9805]: <-- [9:AT+FTH=3\r] Apr 12 10:59:28.18: [ 9805]: --> [7:CONNECT] Apr 12 10:59:28.18: [ 9805]: <-- HDLC<3:FF C8 5F> Apr 12 10:59:28.18: [ 9805]: <-- data [3] Apr 12 10:59:28.18: [ 9805]: <-- data [2] Apr 12 10:59:28.76: [ 9805]: --> [2:OK] Apr 12 10:59:28.76: [ 9805]: RECV FAX (000046370): session with terminated abnormally: T.30 T2 timeout, expected page not received Apr 12 10:59:28.76: [ 9805]: RECV FAX: bin/faxrcvd "recvq/fax000036105.tif" "ttyACM1" "000046370" "T.30 T2 timeout, expected page not received" Apr 12 10:59:28.76: [ 9805]: RECV FAX: end Apr 12 10:59:28.76: [ 9805]: SESSION END Il fax è stato automaticamente inviato a: fax@***.it.
- Follow-Ups:
- Re: [hylafax-users] T.30 T2 timeout, expected page not received
- From: Lee Howard
- Re: [hylafax-users] T.30 T2 timeout, expected page not received
- Prev by Date: Re: [hylafax-users] Some errors in reception
- Next by Date: [hylafax-users] high resolution when I receive fax?
- Previous by thread: Re: [hylafax-users] IAXMODEM: Undefined symbol iax_disable_nojitterbuffer
- Next by thread: Re: [hylafax-users] T.30 T2 timeout, expected page not received
- Index(es):
Project hosted by iFAX Solutions