Re: [hylafax-users] Sending fails with Asterisk/iaxmodem loopback

["Stefan Unterhofer" <stefan.unterhofer@xxxxxxxxxxxxxx>]

I've used HylafaxSender (a java client which uses gnu-hylafax). Works with sendfax, thanks!

2007/2/27, Lee Howard <faxguy@xxxxxxxxxxxxxxxx >:

Stefan Unterhofer wrote:

> Feb 27 13:17:04.54: [ 9494]: REMOTE best rate 9600 bit/s
> Feb 27 13:17:04.54: [ 9494]: REMOTE max A3 page width (303 mm)
> Feb 27 13:17:04.54: [ 9494]: REMOTE max unlimited page length
> Feb 27 13:17:04.54: [ 9494]: REMOTE best vres R16 x 15.4 line/mm
> Feb 27 13:17: 04.54: [ 9494]: REMOTE format support: MH, MR, MMR
> Feb 27 13:17:04.55 : [ 9494]: REMOTE supports T.30 Annex A, 256-byte ECM
> Feb 27 13:17:04.55: [ 9494]: REMOTE best 0 ms/scanline
> Feb 27 13:17:04.55 : [ 9494]: USE 9600 bit/s
> Feb 27 13:17:04.55: [ 9494]: USE error correction mode
> Feb 27 13:17: 04.55: [ 9494]: <-- [9:AT+FRS=7\r]
> Feb 27 13:17:04.60: [ 9494]: --> [2:OK]
> Feb 27 13:17: 04.60: [ 9494]: <-- [9:AT+FTH=3\r]
> Feb 27 13:17:04.62: [ 9494]: --> [7:CONNECT]
> Feb 27 13:17:04.62: [ 9494]: <-- HDLC<3:FF C8 DF>
> Feb 27 13:17:04.62: [ 9494]: <-- data [3]
> Feb 27 13:17: 04.62: [ 9494]: <-- data [2]
> Feb 27 13:17:05.72: [ 9494]: --> [2:OK]
> Feb 27 13:17:05.72: [ 9494]: MODEM input buffering enabled
> Feb 27 13:17: 05.72: [ 9494]: <-- [5:ATH0\r]
> Feb 27 13:17: 05.83: [ 9494]: --> [2:OK]


This kind of a log tends to indicate that somehow you submitted a job to
the server that didn't have any documents and that somehow the server
let you get away with it.  What client program are you using?  Have you
tried just testing with the sendfax command-line client?

Lee.