[hylafax-users] Verticcal Resolutions

[Dave Forrest <drf@xxxxxxxxxxxxx>]

I see in my sendfax that the VRes is set to 98 and this sets it even if the 
remote can use a higher resolution.

Feb 16 08:57:35.51: [10487]: REMOTE best rate 14400 bit/s
Feb 16 08:57:35.51: [10487]: REMOTE max A4 page width (215 mm)
Feb 16 08:57:35.51: [10487]: REMOTE max unlimited page length
Feb 16 08:57:35.51: [10487]: REMOTE best vres 7.7 line/mm
Feb 16 08:57:35.51: [10487]: REMOTE format support: MH
Feb 16 08:57:35.51: [10487]: REMOTE best 0 ms/scanline
Feb 16 08:57:35.51: [10487]: USE 14400 bit/s
Feb 16 08:57:35.51: [10487]: SEND file "docq/cover11;f0"
Feb 16 08:57:35.51: [10487]: USE A4 page width (215 mm)
Feb 16 08:57:35.51: [10487]: USE unlimited page length
Feb 16 08:57:35.51: [10487]: USE 3.85 line/mm
Feb 16 08:57:35.51: [10487]: USE 1-D MH
Feb 16 08:57:35.51: [10487]: USE 0 ms/scanline
Feb 16 08:57:35.51: [10487]: SEND training at v.17 14400 bit/s

As cost of connect time is not an issue for me, I'd like to use whatever the 
REMOTE says its best resolution is.  Where do I set what parameter?  VRes in 
sendfax seems to be absolute and authoritative.


--
David Forrest                     e-mail   drf@xxxxxxxxxxxxx
Maple Park Development Corporation  http://www.maplepark.com
St. Louis, Missouri

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*