[hylafax-users]

["Ivan LAURETTE" <Ivan.LAURETTE@xxxxxx>]

Hi,

I have the following hardware configuration:

                                  ------> MODEM2 -----> HylaFAX server 2
                                /
Fax machine -----RJ11-----> SLIC 
                   |            \
                   |              ------> MODEM1 -----> HylaFAX server 1
                   |
                    -----> DTMF Component

The SLIC acts as a PBX which redirects the incoming call to the right
modem. The SLIC is also responsible for ringing simulation and
transmitting the carrier to the modem.

DMTF signals must be handled by the dedicated component which translate
these signals into phone numbers. Those numbers are not passed to the
modem. Therefore the HylaFAX server doesn't get the destination number
through the modem: it must request it from the DTMF component.

Is it possible to do this without modifying the source code of HylaFAX ?

Thanks in advance for any help.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*