Re: [hylafax-users] Max pages can send or receive once

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

Well, neither iaxmodem nor HylaFAX are making the call disconnect in the 
case you show.  So you need to figure out where the disconnection is 
coming from.  Probably I would suggest starting by watching the Asterisk 
CLI.

Lee.


johnny_xing wrote:

> Yes, Lee, That's why I want to know whether is that any necessary patch or
> configuration to configure it in order not to have such disconnection
> problem. As the fax out with 30 pages are ok and I am using halyafax 5.0.3
> with iaxmodem 0.2.0.
> I have tried it again and this time I fax in 38 pages and it works well.
>
> Best Regards,
>
>
> Johnny Xing Haipeng
> -----Original Message-----
> From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] 
> Sent: Friday, February 09, 2007 1:55 AM
> To: johnny_xing
> Cc: hylafax-users@xxxxxxxxxxx
> Subject: Re: Max pages can send or receive once
>
> johnny_xing wrote:
>
>  
>
> > Feb 08 13:33:03.28: [ 3980]: RECV received frame number 53
> > Feb 08 13:33:03.40: [ 3980]: RECV assumed RCP frame with block end
> > Feb 08 13:33:03.40: [ 3980]: MODEM set XON/XOFF/DRAIN: input ignored,
> >    
> output
>  
>
> > disabled
> > Feb 08 13:33:03.40: [ 3980]: MODEM input buffering disabled
> > Feb 08 13:33:03.40: [ 3980]: --> [10:NO CARRIER]
> > Feb 08 13:33:03.40: [ 3980]: <-- [9:AT+FRH=3\r]
> > Feb 08 13:33:03.46: [ 3980]: --> [5:ERROR]
> >
> >    
>
> This tells you that the call disconnected right at this moment... and 
> that's why the last 15 pages didn't go through in that call.
>
> Lee.
>
>
>
>  


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*