Re: [hylafax-users] Reconizing Faxmodem on Serial Port help!

[David A Davidson <d_davidson@xxxxxxxxxxxxxxxx>]

Issues I've had on linux is to make sure you use the setserial command
to make sure you define the right port address and chip make such as
16550A UART etc.

Regards
David Davidson

donnie wrote:
> My environment consist of:
> OS          => Solaris 10 x86 Dec 2006 release
> Hardware    => generic Intel Celeron based PC at 600Mhz
> Memory      => 512M
> Modem       => US Robotic 56K x2 External Modem
> 
> and
> My environment consist of:
> OS          => RedHat Fedora Core 6 Zod
> Hardware    => generic Intel Celeron based PC at 600Mhz
> Memory      => 512M
> Modem       => US Robotic 56K x2 External Modem
> 
> 
> 
> Compilation of hylafax-4.3.2beta2 in both environment is now ok...but
> somehow, it does not recognize or can communicate with  the faxmodem
> 
> Any software issue concerning communication via the serial port I should
> know about?
> 
> I have tested the modem in a Windoze environment and it works..
> 
> Any serial port issues that I should know about? Any serial
> port/hardware guru out there..?
> 
> I am open to any suggestion...
> 
> donnie
> 
> 
> 
> 
> ____________________ HylaFAX(tm) Users Mailing List _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
> 
> 
> 

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*