Re: [hylafax-users] fax receive problem

[x <mczueira@xxxxxxxxxxxx>]

Hi Andrew,

i'm sending my hylafax with 0xfff:

FaxGetty[19360]: MODEM set DTR OFF
FaxGetty[19360]: MODEM set baud rate: 0 baud (flow control unchanged)
FaxGetty[19360]: MODEM set DTR OFF
FaxGetty[19360]: MODEM set baud rate: 0 baud (flow control unchanged)
FaxGetty[19360]: DELAY 75 ms
FaxGetty[19360]: MODEM set DTR ON
FaxGetty[19360]: DELAY 2600 ms
FaxGetty[19360]: MODEM set baud rate: 19200 baud, input flow RTS/CTS, output flow RTS/CTS
FaxGetty[19360]: DELAY 10 ms
FaxGetty[19360]: MODEM flush i/o
FaxGetty[19360]: <-- [4:ATZ\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: DELAY 3000 ms
FaxGetty[19360]: MODEM flush i/o
FaxGetty[19360]: <-- [7:ATS0=1\r]
FaxGetty[19360]: --> [6:ATS0=1]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [5:ATE0\r]
FaxGetty[19360]: --> [4:ATE0]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [5:ATV1\r]
FaxGetty[19360]: -->
 [2:OK]
FaxGetty[19360]: <-- [5:ATQ0\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [7:ATS8=2\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [8:ATS7=60\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [6:AT&K3\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [6:AT&D2\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [6:AT&C1\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [12:AT+FCLASS=?\r]
FaxGetty[19360]: --> [5:0,1,8]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: MODEM Supports "Data"
FaxGetty[19360]: MODEM Supports "Class 1"
FaxGetty[19360]: MODEM Supports "Voice"
FaxGetty[19360]: <-- [12:AT+FCLASS=1\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [5:ATI3\r]
FaxGetty[19360]: --> [11:/dev/slamr0]
FaxGetty[19360]: --> [14:modemap driver]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: MODEM: Mfr
 /dev/slamr0 modemap driver
FaxGetty[19360]: <-- [5:ATI0\r]
FaxGetty[19360]: --> [20:SmartLink Soft Modem]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: <-- [5:ATI3\r]
FaxGetty[19360]: --> [11:/dev/slamr0]
FaxGetty[19360]: --> [14:modemap driver]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: MODEM: Model SmartLink Soft Modem
FaxGetty[19360]: MODEM: Revision /dev/slamr0 modemap driver
FaxGetty[19360]: <-- [9:AT+FTM=?\r]
FaxGetty[19360]: --> [39:24,48,72,73,74,96,97,98,121,122,145,146]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: MODEM Supports 3.85 line/mm
FaxGetty[19360]: MODEM Supports 7.7 line/mm
FaxGetty[19360]: MODEM Supports 15.4 line/mm
FaxGetty[19360]: MODEM Supports R16 x 15.4 line/mm
FaxGetty[19360]: MODEM Supports 200 x 100 dpi
FaxGetty[19360]: MODEM Supports 200 x 200 dpi
FaxGetty[19360]: MODEM Supports 200 x 400 dpi
FaxGetty[19360]: MODEM Supports 300 x 300
 dpi
FaxGetty[19360]: MODEM Supports 2400 bit/s
FaxGetty[19360]: MODEM Supports 4800 bit/s
FaxGetty[19360]: MODEM Supports 7200 bit/s
FaxGetty[19360]: MODEM Supports 9600 bit/s
FaxGetty[19360]: MODEM Supports 12000 bit/s
FaxGetty[19360]: MODEM Supports 14400 bit/s
FaxGetty[19360]: MODEM Supports A4 page width (215 mm)
FaxGetty[19360]: MODEM Supports B4 page width (255 mm)
FaxGetty[19360]: MODEM Supports A3 page width (303 mm)
FaxGetty[19360]: MODEM Supports A4 page length (297 mm)
FaxGetty[19360]: MODEM Supports B4 page length (364 mm)
FaxGetty[19360]: MODEM Supports unlimited page length
FaxGetty[19360]: MODEM Supports 1-D MH
FaxGetty[19360]: MODEM Supports 2-D MR
FaxGetty[19360]: MODEM Supports 2-D MMR
FaxGetty[19360]: MODEM Supports no ECM
FaxGetty[19360]: MODEM Supports T.30 Annex A, 64-byte ECM11:53:29 FaxGetty[19360]: MODEM Supports T.30 Annex A, 256-byte ECM
FaxGetty[19360]: MODEM Supports 0
 ms/scanline
FaxGetty[19360]: MODEM Supports 5 ms/scanline
FaxGetty[19360]: MODEM Supports 10 ms, 5 ms/scanline
FaxGetty[19360]: MODEM Supports 10 ms/scanline
FaxGetty[19360]: MODEM Supports 20 ms, 10 ms/scanline
FaxGetty[19360]: MODEM Supports 20 ms/scanline
FaxGetty[19360]: MODEM Supports 40 ms, 20 ms/scanline
FaxGetty[19360]: MODEM Supports 40 ms/scanline
FaxGetty[19360]: <-- [9:AT+FRM=?\r]
FaxGetty[19360]: --> [39:24,48,72,73,74,96,97,98,121,122,145,146]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: MODEM /DEV/SLAMR0 MODEMAP DRIVER SmartLink Soft Modem//dev/slamr0 modemap driver
FaxGetty[19360]: <-- [5:ATM0\r]
FaxGetty[19360]: --> [2:OK]
FaxGetty[19360]: STATE CHANGE: LISTENING -> RUNNING (timeout 30)
FaxGetty[19360]: --> [4:RING]
FaxGetty[19360]: --> [7:CONNECT]
FaxGetty[19360]: --> [10:NO CARRIER]
FaxGetty[19360]: <-- [5:ATH0\r]
FaxGetty[19360]: --> [2:OK]

thanks for
 help

Marcos



andrew rinaldi <andrew.rinaldi@xxxxxxxxxxxx> escreveu:

Hi Marcos,

 

You are going to have real problems with your software modem... they really do not support fax very well.  If you are looking for a reliable solution then I would strongly suggest that you get yourself a decent hardware modem.  If reliability is not important (maybe you only wish to send/receive the occasional fax and don't mind multiple attempts) then post a log here with tracing set to 0xfff - maybe someone can help you get a little further.

 

Regards

 

ANDREW RINALDI

Mainpine Limited Support

USA +1 503 822 9944 | Asia/Europe +44 1225 869439  

andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

---

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of x
Sent: 06 February 2007 15:52
To: hylafax-users
Subject: [hylafax-users] fax receive problem

Hi everybody,

i'm new with hylafax. i'm using debian 4.0 with hylafax 4.3.1-7 and a linmodem (SILICON Laboratories AC'97 Modem Controller) that uses slamr driver.
it works when i send fax to others fax machines, but i can't receive fax from a fax machine. the fax machine is ok, it's working.

the following is the log of my hylafax:

FaxGetty[19360]: STATE CHANGE: RUNNING -> LISTENING
FaxGetty[19360]: --> [4:RING]
FaxGetty[19360]: --> [7:CONNECT]
FaxGetty[19360]: --> [10:NO CARRIER]
FaxGetty[19360]: <-- [5:ATH0\r]
FaxGetty[19360]: --> [2:OK]

so, if someone could help me resolve this problem.

thanks

Marcos

__________________________________________________
Fale com seus amigos de graça com o novo Yahoo! Messenger
http://br.messenger.yahoo.com/

__________________________________________________
Fale com seus amigos de graça com o novo Yahoo! Messenger
http://br.messenger.yahoo.com/