Re: [hylafax-users] All faxes I send are corrupt

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Chris,

A lot of work was undertaken between 4.1.x and 4.2.x in the fax protocol
area.  I would suggest that you retry with HylaFAX 4.3.1 or HylaFAX+ 5.0.3
and then send logs here if the issues remain.  As always the advice is to
run the modem in Class 1 or 1.0 if possible.

Regards

ANDREW RINALDI
Mainpine Limited Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

-----Original Message-----
From: hylafax-users-bounce@xxxxxxxxxxx
[mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Chris Farley
Sent: 26 January 2007 20:14
To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] All faxes I send are corrupt

I used to have a functioning hylafax server on a Gentoo Linux box. I 
recently rebuilt the server on an Ubuntu Dapper 6.06 box (running under 
VMWare, if that is relevant). I'm running HylaFAX Version 4.2.5. I was 
previously running a 4.1 series.

I am using the same modem (a MultiTech "MultiModem" model MT1932ZDX), 
and as far as I can tell the exact same configuration at before. But all 
of the faxes that I send are corrupt at the receiver. They are 
"scrunched up". I've posted an example that you can look at:
http://www.northernbrewer.com/pdf/badfax.pdf

There are no errors reported in the logs at all.

I receive faxes just fine.

Any ideas??

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*




____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*