Re: [hylafax-users] FaxDispatch and called fax

["Darren Nickerson" <darren.nickerson@xxxxxxxx>]

Try setting:

RingsBeforeAnswer:      2

instead of 1. and let us know if that helps?

-Darren


----- Original Message ----- 
From: "Fernando" <fernando.alhambra@xxxxxxxxx>
To: "Lee Howard" <faxguy@xxxxxxxxxxxxxxxx>
Cc: <hylafax-users@xxxxxxxxxxx>
Sent: Thursday, January 25, 2007 11:47 AM
Subject: Re: [hylafax-users] FaxDispatch and called fax


> I couldn't get it,
>
> Extract FaxDispatch:
>
> TEMPLATE=es;
> SENDTO=FaxMaster;                               # by default email to 
> FaxMaster
>
> echo "$CALLID1" >> /tmp/fax_CALLID1  # for testing
>
> case "$CALLID1" in
>       *5008)     SENDTO=cuenta1@xxxxx; FILETYPE=pdf;;
>       *5010)     SENDTO=cuenta2@xxxxx; FILETYPE=pdf;;
> esac
>
>
> Extract config.ttyx0-1:
>
> SessionTracing:         0x2FFF
> #
>
>
> #
> CountryCode:            34
> AreaCode:
> FAXNumber:              916405008
> LongDistancePrefix:
> InternationalPrefix:    00
> DialStringRules:        etc/dialrules
> ServerTracing:          30
> SessionTracing:         30
> RecvFileMode:           0600
> LogFileMode:            0600
> DeviceMode:             0600
> RingsBeforeAnswer:      1
> SpeakerVolume:          off
> GettyArgs:              "-h %l dx_%s"
> LocalIdentifier:        "HylaFAX"
> TagLineFont:            etc/lutRS18.pcf
> TagLineFormat:          "From %%l|%c|Page %%P of %%T"
>
> ModemType:              Class1          # use class 1 interface
> ModemFlowControl:       rtscts          # default
>
> ModemRevQueryCmd:       AT+FREV?
>
> ModemResetCmds: "AT#CID=10"     # enable ANI/DNIS reporting
> #RingsBeforeAnswer:     2               # collect info between two RINGs
> #CallIDPattern:         "NMBR = "       # pattern string for calling 
> number
> CallIDPattern:          "NDID = "       # pattern string for called number
>
>
> After the fax is arrived to the FaxMaster, when I see the file
> /tmp/fax_CALLID1, this is empty, no $CALLID1 value.
>
> I've even try to restart the modem, but no results.
>
>
> 2007/1/25, Lee Howard <faxguy@xxxxxxxxxxxxxxxx>:
> > Fernando wrote:
> >
> > > We have a HylaFAX 4.3.1 on a virtual 2.4.21-37.ELsmp RHE 3 with
> > > t38modem and two tty started. One of them with a real fax number but
> > > not the other one. So the inbound calls can enter via ttyx0 or via
> > > ttyx1 for the same called number.
> > >
> > > I don't know how to redirect the inbound faxes by the called fax
> > > number. Any variable?
> >
> >
> > With t38modem the dialed number (DID) information comes through with the
> > Caller*ID as "NDID=dialed_number"
> >
> > You can gather it by having this in your modem config file:
> >
> >  CallIDPattern: "NDID="
> >
> > And then it will be available in FaxDispatch as $CALLIDx where "x"
> > corresponds to the sequence number of the above CallIDPattern in your
> > config file.  (i.e. if it's the only CallIDPattern in your config file
> > then it will be $CALLID1.)
> >
> > Lee.
>
>
> --
> FAP
>
> ____________________ HylaFAX(tm) Users Mailing List 
> _______________________
>  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
> On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
>  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*