Re: [hylafax-users] FaxDispatch and called fax

[Fernando <fernando.alhambra@xxxxxxxxx>]

Are you meaning this one?:

[root@vlirofip log]# cat c000000235
Jan 25 17:53:17.75: [ 6118]: SESSION BEGIN 000000235 34916405075
Jan 25 17:53:17.75: [ 6118]: HylaFAX (tm) Version 4.3.1
Jan 25 17:53:17.75: [ 6118]: <-- [4:ATA\r]
Jan 25 17:53:17.75: [ 6118]: --> [7:NMBR = ]
Jan 25 17:53:17.75: [ 6118]: --> [16:NDID = 916405008]
Jan 25 17:53:17.75: [ 6118]: --> [4:RING]
Jan 25 17:53:22.61: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:22.61: [ 6118]: RECV FAX: begin
Jan 25 17:53:22.62: [ 6118]: <-- data [32]
Jan 25 17:53:22.62: [ 6118]: <-- data [2]
Jan 25 17:53:24.51: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:24.51: [ 6118]: <-- data [23]
Jan 25 17:53:24.51: [ 6118]: <-- data [2]
Jan 25 17:53:25.23: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:25.23: [ 6118]: <-- data [13]
Jan 25 17:53:25.23: [ 6118]: <-- data [2]
Jan 25 17:53:25.71: [ 6118]: --> [2:OK]
Jan 25 17:53:25.71: [ 6118]: <-- [9:AT+FRH=3\r]
Jan 25 17:53:26.69: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:28.19: [ 6118]: --> [2:OK]
Jan 25 17:53:28.19: [ 6118]: REMOTE TSI "Fax Corporativo"
Jan 25 17:53:28.19: [ 6118]: <-- [9:AT+FRH=3\r]
Jan 25 17:53:28.20: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:28.43: [ 6118]: --> [2:OK]
Jan 25 17:53:28.43: [ 6118]: REMOTE wants 14400 bit/s
Jan 25 17:53:28.43: [ 6118]: REMOTE wants A4 page width (215 mm)
Jan 25 17:53:28.43: [ 6118]: REMOTE wants unlimited page length
Jan 25 17:53:28.43: [ 6118]: REMOTE wants 7.7 line/mm
Jan 25 17:53:28.43: [ 6118]: REMOTE wants 2-D MR
Jan 25 17:53:28.43: [ 6118]: RECV training at v.17 14400 bit/s
Jan 25 17:53:28.43: [ 6118]: <-- [11:AT+FRM=145\r]
Jan 25 17:53:30.21: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:31.70: [ 6118]: RECV: TCF 2715 bytes, 3% non-zero, 2612 zero-run
Jan 25 17:53:31.70: [ 6118]: --> [10:NO CARRIER]
Jan 25 17:53:31.70: [ 6118]: <-- [9:AT+FRS=7\r]
Jan 25 17:53:31.79: [ 6118]: --> [2:OK]
Jan 25 17:53:31.79: [ 6118]: TRAINING succeeded
Jan 25 17:53:31.80: [ 6118]: <-- [9:AT+FTH=3\r]
Jan 25 17:53:31.80: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:31.80: [ 6118]: <-- data [3]
Jan 25 17:53:31.80: [ 6118]: <-- data [2]
Jan 25 17:53:32.86: [ 6118]: --> [2:OK]
Jan 25 17:53:32.86: [ 6118]: <-- [11:AT+FRM=146\r]
Jan 25 17:53:33.99: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:33.99: [ 6118]: MODEM input buffering enabled
Jan 25 17:53:33.99: [ 6118]: RECV: begin page
Jan 25 17:53:39.36: [ 6118]: RECV: 2188 total lines, 0 bad lines, 0
consecutive bad lines
Jan 25 17:53:39.36: [ 6118]: RECV: end page
Jan 25 17:53:39.37: [ 6118]: --> [10:NO CARRIER]
Jan 25 17:53:39.37: [ 6118]: <-- [9:AT+FRH=3\r]
Jan 25 17:53:39.77: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:40.64: [ 6118]: --> [2:OK]
Jan 25 17:53:40.64: [ 6118]: RECV recv EOP (no more pages or documents)
Jan 25 17:53:40.64: [ 6118]: <-- [9:AT+FRS=7\r]
Jan 25 17:53:40.83: [ 6118]: --> [2:OK]
Jan 25 17:53:40.85: [ 6118]: <-- [9:AT+FTH=3\r]
Jan 25 17:53:40.95: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:40.95: [ 6118]: <-- data [3]
Jan 25 17:53:40.95: [ 6118]: <-- data [2]
Jan 25 17:53:42.02: [ 6118]: --> [2:OK]
Jan 25 17:53:42.02: [ 6118]: RECV send MCF (message confirmation)
Jan 25 17:53:42.04: [ 6118]: <-- [9:AT+FRH=3\r]
Jan 25 17:53:42.96: [ 6118]: --> [7:CONNECT]
Jan 25 17:53:43.89: [ 6118]: --> [2:OK]
Jan 25 17:53:43.89: [ 6118]: RECV recv DCN (disconnect)
Jan 25 17:53:43.93: [ 6118]: RECV FAX: end
Jan 25 17:53:43.93: [ 6118]: SESSION END




2007/1/25, Aidan Van Dyk <aidan@xxxxxxxx>:
> * Fernando <fernando.alhambra@xxxxxxxxx> [070125 11:47]:
> > I couldn't get it,
>
> You'll have to show some of the faxgetty syslog output.
>
> a.
>
>
> --
> Aidan Van Dyk                                             aidan@xxxxxxxx
> Senior Software Developer                          +1 215 825-8700 x8103
> iFAX Solutions, Inc.                                http://www.ifax.com/
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.1 (GNU/Linux)
>
> iD8DBQFFuODeuVxNPsxNPScRAp9GAJ0dNCa5f2cwEes3gGPCtV17rHWmBgCfRrkb
> 5GAM6lYtSaDlRRYxA6Yla/E=
> =QUgy
> -----END PGP SIGNATURE-----


--
FAP

____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*