[hylafax-users] Winprinter hylafax error; no carrier detected.

["johnny" <johnny_xing@xxxxxxxxxxxx>]

Hello everyone, I have installed the hylafax + iaxmodem for sending out fax
with client winprinter hylafax.

Upon fax out by using PSTN line, there is error related to MODEM No carrier.
And it shows Adjusting skew to -50, Adjusting skew to -100, and until
Adjusting skew to -2150. Then the server shows remote hangup. And the log is
as below,:

Jan 24 13:03:53.21: [ 6182]: SESSION BEGIN 000000152 6565564084
Jan 24 13:03:53.21: [ 6182]: HylaFAX (tm) Version 5.0.3
Jan 24 13:03:53.21: [ 6182]: SEND FAX: JOB 29 DEST 65564084 COMMID 000000152
DEVICE '/dev/ttyIAX' FROM 'root <johnny_xing@xxxxxxxxxxxx>' USER root
Jan 24 13:03:53.21: [ 6182]: STATE CHANGE: RUNNING -> SENDING
Jan 24 13:03:53.21: [ 6182]: <-- [12:AT+FCLASS=1\r]
Jan 24 13:03:53.21: [ 6182]: --> [2:OK]
Jan 24 13:03:53.21: [ 6182]: MODEM set XON/XOFF/FLUSH: input ignored, output
disabled
Jan 24 13:03:53.21: [ 6182]: DIAL 65564084
Jan 24 13:03:53.21: [ 6182]: <-- [13:ATDT65564084\r]
Jan 24 13:04:10.44: [ 6182]: --> [2:^P^C]
Jan 24 13:04:10.44: [ 6182]: SEND FAILED: JOB 29 DEST 65564084 ERR Unknown
problem
Jan 24 13:04:10.44: [ 6182]: <-- [5:ATH0\r]
Jan 24 13:04:10.44: [ 6182]: --> [10:NO CARRIER]
Jan 24 13:04:10.44: [ 6182]: MODEM No carrier
Jan 24 13:04:10.44: [ 6182]: MODEM set DTR OFF
Jan 24 13:04:10.44: [ 6182]: MODEM set baud rate: 0 baud (flow control
unchanged)
Jan 24 13:04:10.44: [ 6182]: STATE CHANGE: SENDING -> MODEMWAIT (timeout 5)
Jan 24 13:04:10.44: [ 6182]: SESSION END

And my config.ttyIAX is configured as below:

CountryCode:            +65
AreaCode:
FAXNumber:              +65.6481.1788
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules
ServerTracing:          0xFFF
SessionTracing:         0xFFF
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "IAXmodem"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           200

ModemType:              Class1          # use this to supply a hint
ModemReadyCmds: ATH0

Class1AdaptRecvCmd:     AT+FAR=1
Class1TMConnectDelay:   400             # counteract quick CONNECT response

Class1RMQueryCmd:       "!24,48,72,96"  # enable this to disable V.17
ModemResetCmds:         AT+VCID=1       # enables CallID display

PagerTTYParity:         none

JobRetryUnknownproblem: 0
# Uncomment DATE and TIME if you really want them, but you probably don't.
CallIDPattern:          "DATE="
CallIDPattern:          "TIME="
CallIDPattern:          "NMBR="
CallIDPattern:          "NAME="
CallIDPattern:          "ANID="
CallIDPattern:          "USER=" # username provided by call
#CallIDPattern:          "PASS="        # password provided by call
CallIDPattern:          "CDID=" # DID context in call
CallIDPattern:          "NDID="


Any one has any idea? And the fax in as softcopy is working fine.



Thanks

Banshing.



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*