Re: [hylafax-users] dialing prefix for outside line ?

[Lee Howard <faxguy@xxxxxxxxxxxxxxxx>]

You put it in your /var/spool/hylafax/etc/config.<devid> file.

Lee.


Dennis Kavadas wrote:

> i've tried addng "ModemDialCmd: ATDT0%s" that to my "class1" config 
> file but didn't make any difference...
> the modem will still not dial "0" for an outside line...
> any suggestions ?
>
>
>
> On 1/19/07, *Lee Howard* <faxguy@xxxxxxxxxxxxxxxx 
> <mailto:faxguy@xxxxxxxxxxxxxxxx>> wrote:
>
>     Dennis Kavadas wrote:
>
>     > hi all
>     > i'm sure this has been asked before, in fact i can see it has but i
>     > could find a definitive answer so I'll ask it again...
>     > i need to dial a "0" from the hylafax server modem to get an
>     outside
>     > line to then place the fax.
>     > how do i specify the leading "0" in the hylafax config so my users
>     > don;t need to supply the supply the leading "0" for every fax ?
>
>
>     In your modem config file put:
>
>       ModemDialCmd:   ATDT0%s
>
>     Lee.


____________________ HylaFAX(tm) Users Mailing List _______________________
 To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
 *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*