Re: [hylafax-users] T.4 capability

[Jean-Pierre Radley <jpr@xxxxxxx>]

Lee Howard typed (on Wed, Jan 10, 2007 at 10:43:03AM -0800):
| Jean-Pierre Radley wrote:
| 
| >Then I went on to my customer's machine running HF 4.2.5, where the
| >problem occured, and sent a test page with no problem.
| >
| 
| Does that machine happen to have a session log for that first problem call?

At level 011.  Here 'tis:


Jan 10 11:12:47.43: [27829]: SESSION BEGIN 000040649 17188152525
Jan 10 11:12:47.43: [27829]: HylaFAX (tm) Version 4.2.5
Jan 10 11:12:47.43: [27829]: SEND FAX: JOB 30841 DEST 17188152525 COMMID 000040649 DEVICE '/dev/ttyA7' FROM 'Les Katzenstein <les@xxxxxxxxxxxxxxxxxxxxxxxxxx>' USER les
Jan 10 11:12:47.43: [27829]: <-- [12:AT+FCLASS=1\r]
Jan 10 11:12:47.45: [27829]: --> [2:OK]
Jan 10 11:12:47.47: [27829]: DIAL 17188152525
Jan 10 11:12:47.47: [27829]: <-- [16:ATDT17188152525\r]
Jan 10 11:13:16.34: [27829]: --> [7:CONNECT]
Jan 10 11:13:47.55: [27829]: MODEM <Timeout>
Jan 10 11:13:47.56: [27829]: DELAY 200 ms
Jan 10 11:13:47.77: [27829]: <-- [9:AT+FRH=3\r]
Jan 10 11:13:47.79: [27829]: --> [7:CONNECT]
Jan 10 11:13:47.80: [27829]: --> [2:OK]
Jan 10 11:13:47.80: [27829]: HDLC frame too short (0 bytes)
Jan 10 11:13:47.80: [27829]: <-- [9:AT+FRS=7\r]
Jan 10 11:13:48.37: [27829]: --> [2:OK]
Jan 10 11:13:48.37: [27829]: <-- [9:AT+FTH=3\r]
Jan 10 11:13:48.42: [27829]: --> [2:CO]
Jan 10 11:13:48.42: [27829]: DELAY 200 ms
Jan 10 11:13:48.63: [27829]: <-- [9:AT+FRH=3\r]
Jan 10 11:13:49.90: [27829]: --> [2:OK]
Jan 10 11:13:49.90: [27829]: DELAY 200 ms
Jan 10 11:13:50.11: [27829]: <-- [9:AT+FRH=3\r]
Jan 10 11:13:52.91: [27829]: --> [16:CONÿVU???
>A]
Jan 10 11:13:52.91: [27829]: DELAY 200 ms
Jan 10 11:13:53.12: [27829]: <-- [9:AT+FRH=3\r]
Jan 10 11:13:53.14: [27829]: --> [7:CONNECT]
Jan 10 11:13:53.23: [27829]: --> [2:OK]
Jan 10 11:13:53.23: [27829]: Remote has no T.4 receiver capability
Jan 10 11:13:53.23: [27829]: SEND FAILED: JOB 30841 DEST 17188152525 ERR Remote has no T.4 receiver capability
Jan 10 11:13:53.23: [27829]: <-- [9:AT+FTH=3\r]
Jan 10 11:13:53.28: [27829]: --> [7:CONNECT]
Jan 10 11:13:53.28: [27829]: <-- data [3]
Jan 10 11:13:53.28: [27829]: <-- data [2]
Jan 10 11:13:54.60: [27829]: --> [2:OK]
Jan 10 11:13:54.60: [27829]: <-- [5:ATH0\r]
Jan 10 11:13:55.30: [27829]: --> [2:OK]
Jan 10 11:13:55.96: [27829]: SESSION END

-- 
JP
	==> http://www.frappr.com/cusm <==

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*