 HylaFAX The world's
most advanced open source fax server
|
[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]
Re: [hylafax-users] Receiving Faxes
- To: Lee Howard <faxguy@xxxxxxxxxxxxxxxx>
- Subject: Re: [hylafax-users] Receiving Faxes
- From: Jaroslaw Grzabel <thorvald@xxxxxxxxxx>
- Cc: hylafax-users@xxxxxxxxxxx
- Date: Thu, 21 Dec 2006 08:57:22 +0100
> This is the server logging. I need to see the session logging
> which is
> found in /var/spool/hylafax/log/. Please send corresponding send
> and
> receive logs. If SessionTracing is not at 0xFFF I may need you to
> change that first.
Dec 21 08:49:25 [FaxQueuer] SUBMIT JOB 47
Dec 21 08:49:25 [FaxQueuer] JOB 47 (suspended dest pri 127 tts 0:00 killtime 2:59:00): CREATE
Dec 21 08:49:25 [FaxQueuer] JOB 47 (suspended dest +487144 pri 127 tts 0:00 killtime 2:59:00): CMD DONE: exit status 0
Dec 21 08:49:25 [FaxQueuer] JOB 47 (ready dest +487144 pri 127 tts 0:00 killtime 2:59:00): READY
Dec 21 08:49:26 [FaxQueuer] JOB 47 (ready dest +487144 pri 127 tts 0:00 killtime 2:58:59): PROCESS
Dec 21 08:49:26 [FaxGetty] LOCKWAIT
Dec 21 08:49:26 [FaxGetty] STATE CHANGE: RUNNING -> LOCKWAIT (timeout 30)
Dec 21 08:49:26 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:58:59): ACTIVE
Dec 21 08:49:26 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:58:59): PREPARE START
Dec 21 08:49:26 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:58:59): CONVERT DOCUMENT: bin/ps2fax -o do
cq/doc54.ps;40 -r 98 -w 1728 -l 297 -m 4294967295 -U -2 docq/doc54.ps.47
Dec 21 08:49:27 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:58:58): PREPARE DONE
Dec 21 08:49:27 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:58:58): CMD START /usr/sbin/faxsend -m tty
S0 sendq/q47 (PID 13555)
Dec 21 08:49:27 [FaxSend] Syntax error at line 149, missing ':' in "{"
Dec 21 08:49:27 [FaxSend] Syntax error at line 305, missing ':' in " {"
Dec 21 08:49:27 [FaxSend] Syntax error at line 418, missing ':' in " }"
Dec 21 08:49:27 [FaxSend] Syntax error at line 419, missing ':' in "}"
Dec 21 08:49:28 [FaxSend] MODEM set DTR OFF
Dec 21 08:49:28 [FaxSend] DELAY 75 ms
Dec 21 08:49:28 [FaxSend] MODEM set DTR ON
Dec 21 08:49:28 [FaxSend] DELAY 2600 ms
Dec 21 08:49:31 [FaxSend] MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Dec 21 08:49:31 [FaxSend] DELAY 10 ms
Dec 21 08:49:31 [FaxSend] MODEM flush i/o
Dec 21 08:49:31 [FaxSend] <-- [4:ATZ\r]
Dec 21 08:49:31 [FaxSend] <-- <3:41 54 5A>
Dec 21 08:49:31 [FaxSend] <-- <1:0D>
Dec 21 08:49:32 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:32 [FaxSend] --> [2:OK]
Dec 21 08:49:32 [FaxSend] DELAY 3000 ms
Dec 21 08:49:35 [FaxSend] MODEM flush i/o
Dec 21 08:49:35 [FaxSend] <-- [7:ATS0=0\r]
Dec 21 08:49:35 [FaxSend] <-- <6:41 54 53 30 3D 30>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:35 [FaxSend] --> <13:41 54 53 30 3D 30 0D 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:35 [FaxSend] --> [6:ATS0=0]
Dec 21 08:49:35 [FaxSend] --> [2:OK]
Dec 21 08:49:35 [FaxSend] <-- [5:ATE0\r]
Dec 21 08:49:35 [FaxSend] <-- <4:41 54 45 30>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:35 [FaxSend] --> <11:41 54 45 30 0D 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:35 [FaxSend] --> [4:ATE0]
Dec 21 08:49:35 [FaxSend] --> [2:OK]
Dec 21 08:49:35 [FaxSend] <-- [5:ATV1\r]
Dec 21 08:49:35 [FaxSend] <-- <4:41 54 56 31>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:35 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:35 [FaxSend] --> [2:OK]
Dec 21 08:49:35 [FaxSend] <-- [5:ATQ0\r]
Dec 21 08:49:35 [FaxSend] <-- <4:41 54 51 30>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:35 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:35 [FaxSend] --> [2:OK]
Dec 21 08:49:35 [FaxSend] <-- [7:ATS8=2\r]
Dec 21 08:49:35 [FaxSend] <-- <6:41 54 53 38 3D 32>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:35 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:35 [FaxSend] --> [2:OK]
Dec 21 08:49:35 [FaxSend] <-- [8:ATS7=60\r]
Dec 21 08:49:35 [FaxSend] <-- <7:41 54 53 37 3D 36 30>
Dec 21 08:49:35 [FaxSend] <-- <1:0D>
Dec 21 08:49:36 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:36 [FaxSend] --> [2:OK]
Dec 21 08:49:36 [FaxSend] <-- [12:AT+FCLASS=?\r]
Dec 21 08:49:36 [FaxSend] <-- <11:41 54 2B 46 43 4C 41 53 53 3D 3F>
Dec 21 08:49:36 [FaxSend] <-- <1:0D>
Dec 21 08:49:36 [FaxSend] --> <17:0D 0A 30 2C 31 2C 32 2C 38 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:36 [FaxSend] --> [7:0,1,2,8]
Dec 21 08:49:36 [FaxSend] --> [2:OK]
Dec 21 08:49:36 [FaxSend] MODEM Supports "Data"
Dec 21 08:49:36 [FaxSend] MODEM Supports "Class 1"
Dec 21 08:49:36 [FaxSend] MODEM Supports "Class 2"
Dec 21 08:49:36 [FaxSend] MODEM Supports "Voice"
Dec 21 08:49:36 [FaxSend] <-- [12:AT+FCLASS=0\r]
Dec 21 08:49:36 [FaxSend] <-- <11:41 54 2B 46 43 4C 41 53 53 3D 30>
Dec 21 08:49:36 [FaxSend] <-- <1:0D>
Dec 21 08:49:36 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:36 [FaxSend] --> [2:OK]
Dec 21 08:49:36 [FaxSend] <-- [5:ATI3\r]
Dec 21 08:49:36 [FaxSend] <-- <4:41 54 49 33>
Dec 21 08:49:36 [FaxSend] <-- <1:0D>
Dec 21 08:49:36 [FaxSend] --> <32:0D 0A 44 50 20 48 6F 6D 65 20 56 45 52 20 35 2E 30 31 20 56 2E 39 32 20 0D 0A 0D 0A 4F 4B 0D
0A>
Dec 21 08:49:36 [FaxSend] --> [22:DP Home VER 5.01 V.92 ]
Dec 21 08:49:36 [FaxSend] --> [2:OK]
Dec 21 08:49:36 [FaxSend] MODEM: Mfr DP Home VER 5.01 V.92
Dec 21 08:49:36 [FaxSend] <-- [5:ATI0\r]
Dec 21 08:49:36 [FaxSend] <-- <4:41 54 49 30>
Dec 21 08:49:36 [FaxSend] <-- <1:0D>
Dec 21 08:49:36 [FaxSend] --> <32:0D 0A 44 50 20 48 6F 6D 65 20 56 45 52 20 35 2E 30 31 20 56 2E 39 32 20 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:36 [FaxSend] --> [22:DP Home VER 5.01 V.92 ]
Dec 21 08:49:36 [FaxSend] --> [2:OK]
Dec 21 08:49:36 [FaxSend] MODEM: Model DP Home VER 5.01 V.92
Dec 21 08:49:36 [FaxSend] MODEM set DTR OFF
Dec 21 08:49:36 [FaxSend] DELAY 75 ms
Dec 21 08:49:36 [FaxSend] MODEM set DTR ON
Dec 21 08:49:36 [FaxSend] DELAY 2600 ms
Dec 21 08:49:40 [FaxSend] MODEM set baud rate: 19200 baud, input flow XON/XOFF, output flow XON/XOFF
Dec 21 08:49:40 [FaxSend] DELAY 10 ms
Dec 21 08:49:40 [FaxSend] MODEM flush i/o
Dec 21 08:49:40 [FaxSend] <-- [4:ATZ\r]
Dec 21 08:49:40 [FaxSend] <-- <3:41 54 5A>
Dec 21 08:49:40 [FaxSend] <-- <1:0D>
Dec 21 08:49:40 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:40 [FaxSend] --> [2:OK]
Dec 21 08:49:40 [FaxSend] DELAY 3000 ms
Dec 21 08:49:43 [FaxSend] MODEM flush i/o
Dec 21 08:49:43 [FaxSend] <-- [7:ATS0=0\r]
Dec 21 08:49:43 [FaxSend] <-- <6:41 54 53 30 3D 30>
Dec 21 08:49:43 [FaxSend] <-- <1:0D>
Dec 21 08:49:43 [FaxSend] --> <13:41 54 53 30 3D 30 0D 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:43 [FaxSend] --> [6:ATS0=0]
Dec 21 08:49:43 [FaxSend] --> [2:OK]
Dec 21 08:49:43 [FaxSend] <-- [5:ATE0\r]
Dec 21 08:49:43 [FaxSend] <-- <4:41 54 45 30>
Dec 21 08:49:43 [FaxSend] <-- <1:0D>
Dec 21 08:49:43 [FaxSend] --> <11:41 54 45 30 0D 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:43 [FaxSend] --> [4:ATE0]
Dec 21 08:49:43 [FaxSend] --> [2:OK]
Dec 21 08:49:43 [FaxSend] <-- [5:ATV1\r]
Dec 21 08:49:43 [FaxSend] <-- <4:41 54 56 31>
Dec 21 08:49:43 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [5:ATQ0\r]
Dec 21 08:49:44 [FaxSend] <-- <4:41 54 51 30>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [7:ATS8=2\r]
Dec 21 08:49:44 [FaxSend] <-- <6:41 54 53 38 3D 32>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [8:ATS7=60\r]
Dec 21 08:49:44 [FaxSend] <-- <7:41 54 53 37 3D 36 30>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [12:AT+FCLASS=?\r]
Dec 21 08:49:44 [FaxSend] <-- <11:41 54 2B 46 43 4C 41 53 53 3D 3F>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <17:0D 0A 30 2C 31 2C 32 2C 38 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [7:0,1,2,8]
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] MODEM Supports "Data"
Dec 21 08:49:44 [FaxSend] MODEM Supports "Class 1"
Dec 21 08:49:44 [FaxSend] MODEM Supports "Class 2"
Dec 21 08:49:44 [FaxSend] MODEM Supports "Voice"
Dec 21 08:49:44 [FaxSend] <-- [12:AT+FCLASS=2\r]
Dec 21 08:49:44 [FaxSend] <-- <11:41 54 2B 46 43 4C 41 53 53 3D 32>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [9:AT+FMFR?\r]
Dec 21 08:49:44 [FaxSend] <-- <8:41 54 2B 46 4D 46 52 3F>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <32:0D 0A 44 50 20 48 6F 6D 65 20 56 45 52 20 35 2E 30 31 20 56 2E 39 32 20 0D 0A 0D 0A 4F 4B 0D
0A>
Dec 21 08:49:44 [FaxSend] --> [22:DP Home VER 5.01 V.92 ]
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] MODEM: Mfr DP Home VER 5.01 V.92
Dec 21 08:49:44 [FaxSend] <-- [9:AT+FMDL?\r]
Dec 21 08:49:44 [FaxSend] <-- <8:41 54 2B 46 4D 44 4C 3F>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:44 [FaxSend] --> <32:0D 0A 44 50 20 48 6F 6D 65 20 56 45 52 20 35 2E 30 31 20 56 2E 39 32 20 0D 0A 0D 0A 4F 4B 0D
0A>
Dec 21 08:49:44 [FaxSend] --> [22:DP Home VER 5.01 V.92 ]
Dec 21 08:49:44 [FaxSend] --> [2:OK]
Dec 21 08:49:44 [FaxSend] <-- [9:AT+FREV?\r]
Dec 21 08:49:44 [FaxSend] <-- <8:41 54 2B 46 52 45 56 3F>
Dec 21 08:49:44 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <19:0D 0A 73 30 38 31 36 32 30 30 32 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [9:s08162002]
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] <-- [10:AT+FDCC=?\r]
Dec 21 08:49:45 [FaxSend] <-- <9:41 54 2B 46 44 43 43 3D 3F>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <53:0D 0A 28 30 2D 31 29 2C 28 30 2D 35 29 2C 28 30 2D 32 29 2C 28 30 2D 32 29 2C 28 30 2D 32 29
2C 28 30 29 2C 28 30 29 2C 28 30 2D 37 29 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [43:(0-1),(0-5),(0-2),(0-2),(0-2),(0),(0),(0-7)]
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] MODEM Supports 3.85 line/mm
Dec 21 08:49:45 [FaxSend] MODEM Supports 7.7 line/mm
Dec 21 08:49:45 [FaxSend] MODEM Supports 2400 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports 4800 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports 7200 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports 9600 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports 12000 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports 14400 bit/s
Dec 21 08:49:45 [FaxSend] MODEM Supports A4 page width (215 mm)
Dec 21 08:49:45 [FaxSend] MODEM Supports B4 page width (255 mm)
Dec 21 08:49:45 [FaxSend] MODEM Supports A3 page width (303 mm)
Dec 21 08:49:45 [FaxSend] MODEM Supports A4 page length (297 mm)
Dec 21 08:49:45 [FaxSend] MODEM Supports B4 page length (364 mm)
Dec 21 08:49:45 [FaxSend] MODEM Supports unlimited page length
Dec 21 08:49:45 [FaxSend] MODEM Supports 1-D MH
Dec 21 08:49:45 [FaxSend] MODEM Supports 2-D MR
Dec 21 08:49:45 [FaxSend] MODEM Supports 2-D Uncompressed Mode
Dec 21 08:49:45 [FaxSend] MODEM Supports 0 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 5 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 10 ms, 5 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 10 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 20 ms, 10 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 20 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 40 ms, 20 ms/scanline
Dec 21 08:49:45 [FaxSend] MODEM Supports 40 ms/scanline
Dec 21 08:49:45 [FaxSend] <-- [9:AT+FCQ=?\r]
Dec 21 08:49:45 [FaxSend] <-- <8:41 54 2B 46 43 51 3D 3F>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <13:0D 0A 30 2D 31 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [3:0-1]
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] MODEM Supports 1D copy quality checking (but not enabled)
Dec 21 08:49:45 [FaxSend] <-- [9:AT+FAP=?\r]
Dec 21 08:49:45 [FaxSend] <-- <8:41 54 2B 46 41 50 3D 3F>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <9:0D 0A 45 52 52 4F 52 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [5:ERROR]
Dec 21 08:49:45 [FaxSend] <-- [10:AT+FSPL=?\r]
Dec 21 08:49:45 [FaxSend] <-- <9:41 54 2B 46 53 50 4C 3D 3F>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <13:0D 0A 30 2C 31 0D 0A 0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [3:0,1]
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] <-- [10:AT+FTBC=0\r]
Dec 21 08:49:45 [FaxSend] <-- <9:41 54 2B 46 54 42 43 3D 30>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] <-- [10:AT+FBOR=0\r]
Dec 21 08:49:45 [FaxSend] <-- <9:41 54 2B 46 42 4F 52 3D 30>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] <-- [13:AT+FPHCTO=30\r]
Dec 21 08:49:45 [FaxSend] <-- <12:41 54 2B 46 50 48 43 54 4F 3D 33 30>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:45 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:45 [FaxSend] --> [2:OK]
Dec 21 08:49:45 [FaxSend] <-- [24:AT+FDCC=1,5,2,2,2,0,0,0\r]
Dec 21 08:49:45 [FaxSend] <-- <23:41 54 2B 46 44 43 43 3D 31 2C 35 2C 32 2C 32 2C 32 2C 30 2C 30 2C 30>
Dec 21 08:49:45 [FaxSend] <-- <1:0D>
Dec 21 08:49:46 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:46 [FaxSend] --> [2:OK]
Dec 21 08:49:46 [FaxSend] MODEM DP HOME VER 5.01 V.92 DP Home VER 5.01 V.92/s08162002
Dec 21 08:49:46 [FaxSend] <-- [5:ATM0\r]
Dec 21 08:49:46 [FaxSend] <-- <4:41 54 4D 30>
Dec 21 08:49:46 [FaxSend] <-- <1:0D>
Dec 21 08:49:46 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:46 [FaxSend] --> [2:OK]
Dec 21 08:49:46 [FaxSend] <-- [15:AT+FLID="TEST"\r]
Dec 21 08:49:46 [FaxSend] <-- <14:41 54 2B 46 4C 49 44 3D 22 54 45 53 54 22>
Dec 21 08:49:46 [FaxSend] <-- <1:0D>
Dec 21 08:49:46 [FaxSend] --> <6:0D 0A 4F 4B 0D 0A>
Dec 21 08:49:46 [FaxSend] --> [2:OK]
Dec 21 08:49:46 [FaxSend] STATE CHANGE: BASE -> RUNNING (timeout 30)
Dec 21 08:49:46 [FaxSend] MODEM input buffering disabled
Dec 21 08:49:46 [FaxSend] SEND FAX: JOB 47 DEST 44 COMMID 000000243 DEVICE '/dev/ttyS0' FROM 'jarek <jarek@serwer>' USER lp
Dec 21 08:50:26 [FaxQueuer] JOB 47 (active dest +487144 pri 127 tts 0:00 killtime 2:57:59): CMD DONE: exit status 0
Dec 21 08:50:26 [FaxQueuer] JOB 47: SEND FINISHED: 0:59; but job file vanished
Dec 21 08:50:26 [FaxQueuer] JOB 47 (failed dest +487144 pri 127 tts 0:00 killtime 2:57:59): DEAD
Dec 21 08:50:26 [FaxQueuer] JOB 47 (failed dest +487144 pri 127 tts 0:00 killtime 2:57:59): DELETE
As I can see, modem does something the same few times.
But this doesn`t change many, because still page is converted wrong (other problem) :).
> Lee.
Thank You :).
Jarek.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*
- Follow-Ups:
- Re: [hylafax-users] Receiving Faxes
- From: Lee Howard
- Re: [hylafax-users] Receiving Faxes
- References:
- [hylafax-users] Receiving Faxes
- From: Vernon A. Fort
- Re: [hylafax-users] Receiving Faxes
- From: Lee Howard
- Re: [hylafax-users] Receiving Faxes
- From: Jaroslaw Grzabel
- Re: [hylafax-users] Receiving Faxes
- From: Lee Howard
- Re: [hylafax-users] Receiving Faxes
- From: Jaroslaw Grzabel
- Re: [hylafax-users] Receiving Faxes
- From: Lee Howard
- [hylafax-users] Receiving Faxes
- Prev by Date: Re: [hylafax-users] Problem with converting
- Next by Date: Re: [hylafax-users] Receiving Faxes
- Previous by thread: Re: [hylafax-users] Receiving Faxes
- Next by thread: Re: [hylafax-users] Receiving Faxes
- Index(es):
Project hosted by iFAX Solutions