Re: [hylafax-users] Receiving Faxes

["Ted To" <mathmethods@xxxxxxxxx>]

I'm also having problems receiving faxes although I have only tested one machine.  A Brother MFC 4550.  I have been able to send faxes to this machine using HylaFAX+ after some help from Lee.  The receive log is at http://patrick-campbell.com/c000000025.  Any help will be most appreciated.  Let me know if any further diagnostics are needed.

 

Thanks,

Ted

 

On 12/19/06, Vernon A. Fort <vfort@xxxxxxxxxxxxxxxxxxxxxxx > wrote:

Having problems receiving faxes - standard configuration version 4.3.0
(gentoo).  Would anyone have a clue WHERE to start looking for a fix.
The tif file looks good.

Vernon

> Dec 19 14:58:45.73: [ 5237]: SESSION BEGIN 000000031 16156920124
> Dec 19 14:58:45.73: [ 5237]: HylaFAX (tm) Version 4.3.0
> Dec 19 14:58:45.73: [ 5237]: <-- [4:ATA\r]
> Dec 19 14:58:49.42: [ 5237]: --> [3:FAX]
> Dec 19 14:58:55.57: [ 5237]: --> [5:+FCON]
> Dec 19 14:58:55.57: [ 5237]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS1'
> Dec 19 14:58:55.57 : [ 5237]: RECV FAX: begin
> Dec 19 14:58:57.20: [ 5237]: --> [29:+FTSI: "SIPA CLAIM"]
> Dec 19 14:58:57.20: [ 5237]: REMOTE TSI "SIPA CLAIM"
> Dec 19 14:58:57.55: [ 5237]: --> [22:+FDCS: 1,5,0,2,0,0,0,0]
> Dec 19 14:58:57.55: [ 5237]: REMOTE wants 14400 bit/s
> Dec 19 14:58:57.55: [ 5237]: REMOTE wants A4 page width (215 mm)
> Dec 19 14:58:57.55: [ 5237]: REMOTE wants unlimited page length
> Dec 19 14:58: 57.55: [ 5237]: REMOTE wants 7.7 line/mm
> Dec 19 14:58:57.55: [ 5237]: REMOTE wants 1-D MH
> Dec 19 14:58:57.68: [ 5237]: --> [2:OK]
> Dec 19 14:58:57.68: [ 5237]: <-- [7:AT+FDR\r]
> Dec 19 14:59: 00.48: [ 5237]: --> [5:+FCFR]
> Dec 19 14:59:03.41: [ 5237]: --> [22:+FDCS: 1,5,0,2,0,0,0,0]
> Dec 19 14:59:03.41: [ 5237]: REMOTE wants 14400 bit/s
> Dec 19 14:59:03.41: [ 5237]: REMOTE wants A4 page width (215 mm)
> Dec 19 14:59:03.41: [ 5237]: REMOTE wants unlimited page length
> Dec 19 14:59:03.41: [ 5237]: REMOTE wants 7.7 line/mm
> Dec 19 14:59:03.41: [ 5237]: REMOTE wants 1-D MH
> Dec 19 14:59:03.41: [ 5237]: --> [7:CONNECT]
> Dec 19 14:59:03.41: [ 5237]: RECV: begin page
> Dec 19 14:59:03.41: [ 5237]: RECV: send trigger 022
> Dec 19 14:59:03.41: [ 5237]: <-- data [1]
> Dec 19 14:59:03.41: [ 5237]: Copy quality checking performed by host
> Dec 19 15:00:04.80: [ 5237]: RECV: 1445 total lines, 0 bad lines, 1
> consecutive bad lines
> Dec 19 15:00:04.80: [ 5237]: --> [17:+FPTS: 1,2219,0,0]
> Dec 19 15:00:16.94: [ 5237]: --> [10:+FHNG: 101]
> Dec 19 15:00:16.94: [ 5237]: REMOTE HANGUP: RSPREC invalid response
> received (code 101)
> Dec 19 15:00:18.40: [ 5237]: --> [2:OK]
> Dec 19 15:00:18.40: [ 5237]: RECV keeping unconfirmed page
> Dec 19 15:00:18.40: [ 5237]: RECV FAX (000000031): from SIPA CLAIM,
> page 1 in 1:09, INF, 7.7 line/mm, 1-D MH, 14400 bit/s
> Dec 19 15:00:18.40: [ 5237]: RECV FAX (000000031):
> recvq/fax000000020.tif from SIPA CLAIM, route to <unspecified>, 1
> pages in 1:23
> Dec 19 15:00:18.40: [ 5237]: RECV FAX: RSPREC invalid response received

____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*