Re: [hylafax-users] Inbound lines limits - suggestions

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi,

If you want a simple solution then you might want to take a look at the
OCTO+ http://www.mainpine.com/downloads/DS2024_2_US.PDF

>>If you are in a situation with > 24 analog lines, it would be more
practical to consolidate them all into a PRI and use Asterisk + HylaFAX +
(kick-ass) IAXmodem. You have more control (i.e. you can create / destroy
>>virtual modems at will, create / destroy DID's at will, without being
onsite, no truck roll) and less to go wrong (since there's no multiport
serial card, no physical modems, just a PRI line from the telco). Oh yeah,
it >>will be cheaper too.

Remember that you only get 9600bps receive and 14400bps transmit with
IAXmodem because of patent issues.  If V.34 is important to you then you
need a full hardware solution.

Regards

ANDREW RINALDI
Mainpine Limited Support
USA +1 503 822 9944 | Asia/Europe +44 1225 869439  
andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com 



____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*