[hylafax-users] us robotics 56k fax modem.

[Mauro Sanna <mauro.sanna@xxxxxxxxxxxxxxxxxx>]

Hallo.
Here is my configuration for modem in object:
CountryCode:            xx
AreaCode:               xxx
FAXNumber:              xxxxxxx
LongDistancePrefix:     1
InternationalPrefix:    011
DialStringRules:        etc/dialrules.europe
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        "nothing"
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25

ModemType:              Class2.0        # use class 2.0 interface
ModemRate:              19200           # DCE-DTE communication rate
ModemFlowControl:       rtscts          # hardware flow control
#
ModemNoFlowCmd:         AT&H0&I0&R1     # setup modem for no flow
control
ModemHardFlowCmd:       AT&H1&I0&R2     # setup modem for hardware flow
control
ModemSoftFlowCmd:       AT&H2&I2&R1     # setup modem for software flow
control
#
ModemSetupDTRCmd:       ATS13=1&D2      # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier
(or not)
ModemResultCodesCmd:    ATQ0X4          # enable extended result codes
#
ModemSetupAACmd:        AT+FAA=1
#
ModemSetVolumeCmd:      "ATM0 ATM1 ATM1 ATM1 ATM1"
Class2BUGCmd:           AT+FBU=0
#
Class2CQQueryCmd:       !(0),(0)        # override modem response
#
Class2NRCmd:    AT+FNR=1,1,1,0
#
Class2SendRTC:  yes
#
Class2APQueryCmd:       none

If I send to an internal number such as 8332, it works.
If I send to an external number, such as 0,0703334556, it doesn't work.
It says:"ERR Busy signal detected"
Why?

p.s. scusate per il mio inglese


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*