HylaFAX The world's
most advanced open source fax server
|
|
[
Date Prev][
Date Next][
Thread Prev][
Thread Next]
[
Date Index]
[
Thread Index]
[hylafax-users] No response to PPS sent 3 times
Having issues sending faxes to one of my best clients. This same error
occurs nearly all the time, although some do manage to get through. Sure
would appreciate help from a fax guru!
Thank you, Ray
ROrtgiesen@xxxxxxxxxxxxxxxxxxxxxxx
Red Hat Linux ES 3 (Taroon Update 7)
Hyla 4.2.3
IBM eServer x335
(4) MultiTech 5634 usb modems
log file:
Jun 26 12:29:13.73: [32048]: SESSION BEGIN 000166141 15124160000
Jun 26 12:29:13.73: [32048]: HylaFAX (tm) Version 4.2.3
Jun 26 12:29:13.73: [32048]: SEND FAX: JOB 124516 DEST 15124160000 COMMID
000166141 DEVICE '/dev/usb/ttyACM1' FROM 'faxuser
<faxuser@xxxxxxxxxxxxxxxxxxxxxxx>' USER faxuser
Jun 26 12:29:13.73: [32048]: <-- [14:AT+FCLASS=1.0\r]
Jun 26 12:29:13.73: [32048]: --> [2:OK]
Jun 26 12:29:13.73: [32048]: MODEM set XON/XOFF/FLUSH: input ignored,
output disabled
Jun 26 12:29:13.73: [32048]: DIAL 15124160000
Jun 26 12:29:13.73: [32048]: <-- [16:ATDT15124160000\r]
Jun 26 12:30:03.64: [32048]: --> [7:CONNECT]
Jun 26 12:30:05.33: [32048]: --> HDLC<25:FF C0 02 8C 9C EC 6C 6C 8C 2C 4C
8C AC 04 04 04 04 04 04 04 04 04 04 25 AA>
Jun 26 12:30:05.33: [32048]: --> [2:OK]
Jun 26 12:30:05.33: [32048]: REMOTE CSI "5124160000"
Jun 26 12:30:05.33: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:05.33: [32048]: --> [7:CONNECT]
Jun 26 12:30:05.77: [32048]: --> HDLC<15:FF C8 01 00 77 1F 23 01 09 81 01
01 04 3C AA>
Jun 26 12:30:05.77: [32048]: --> [2:OK]
Jun 26 12:30:05.77: [32048]: REMOTE best rate 14400 bit/s
Jun 26 12:30:05.77: [32048]: REMOTE max A4 page width (215 mm)
Jun 26 12:30:05.77: [32048]: REMOTE max unlimited page length
Jun 26 12:30:05.77: [32048]: REMOTE best vres 7.7 line/mm
Jun 26 12:30:05.77: [32048]: REMOTE format support: MH, MR, MMR, JBIG
Jun 26 12:30:05.77: [32048]: REMOTE supports T.30 Annex A, 256-byte ECM
Jun 26 12:30:05.77: [32048]: REMOTE best 0 ms/scanline
Jun 26 12:30:05.77: [32048]: USE 9600 bit/s
Jun 26 12:30:05.77: [32048]: USE error correction mode
Jun 26 12:30:05.77: [32048]: SEND file "docq/doc271052.ps;f1"
Jun 26 12:30:05.77: [32048]: USE A4 page width (215 mm)
Jun 26 12:30:05.77: [32048]: USE unlimited page length
Jun 26 12:30:05.77: [32048]: USE 7.7 line/mm
Jun 26 12:30:05.77: [32048]: USE 2-D MMR
Jun 26 12:30:05.77: [32048]: USE 0 ms/scanline
Jun 26 12:30:05.77: [32048]: SEND training at v.29 9600 bit/s
Jun 26 12:30:05.77: [32048]: <-- [9:AT+FRS=7\r]
Jun 26 12:30:05.90: [32048]: --> [2:OK]
Jun 26 12:30:05.90: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:06.86: [32048]: --> [7:CONNECT]
Jun 26 12:30:06.86: [32048]: <-- HDLC<23:FF C0 C2 CE C6 96 2E CE F6 76 E6
86 96 22 04 76 F6 96 76 96 B6 F6 22>
Jun 26 12:30:06.86: [32048]: <-- data [23]
Jun 26 12:30:06.86: [32048]: <-- data [2]
Jun 26 12:30:06.86: [32048]: --> [7:CONNECT]
Jun 26 12:30:06.86: [32048]: <-- HDLC<7:FF C8 C1 00 62 1F 22>
Jun 26 12:30:06.86: [32048]: <-- data [7]
Jun 26 12:30:06.86: [32048]: <-- data [2]
Jun 26 12:30:08.16: [32048]: --> [2:OK]
Jun 26 12:30:08.16: [32048]: <-- [9:AT+FTS=7\r]
Jun 26 12:30:08.22: [32048]: --> [2:OK]
Jun 26 12:30:08.22: [32048]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jun 26 12:30:08.22: [32048]: <-- [10:AT+FTM=96\r]
Jun 26 12:30:08.22: [32048]: --> [7:CONNECT]
Jun 26 12:30:08.22: [32048]: <-- data [1024]
Jun 26 12:30:08.24: [32048]: <-- data [776]
Jun 26 12:30:08.26: [32048]: <-- data [2]
Jun 26 12:30:10.04: [32048]: --> [2:OK]
Jun 26 12:30:10.04: [32048]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Jun 26 12:30:10.04: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:10.13: [32048]: --> [7:CONNECT]
Jun 26 12:30:10.68: [32048]: --> HDLC<5:FF C8 22 67 DD>
Jun 26 12:30:10.68: [32048]: --> [2:OK]
Jun 26 12:30:10.68: [32048]: SEND training at v.29 7200 bit/s
Jun 26 12:30:10.68: [32048]: <-- [9:AT+FRS=7\r]
Jun 26 12:30:10.82: [32048]: --> [2:OK]
Jun 26 12:30:10.82: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:11.78: [32048]: --> [7:CONNECT]
Jun 26 12:30:11.78: [32048]: <-- HDLC<23:FF C0 C2 CE C6 96 2E CE F6 76 E6
86 96 22 04 76 F6 96 76 96 B6 F6 22>
Jun 26 12:30:11.78: [32048]: <-- data [23]
Jun 26 12:30:11.78: [32048]: <-- data [2]
Jun 26 12:30:11.78: [32048]: --> [7:CONNECT]
Jun 26 12:30:11.78: [32048]: <-- HDLC<7:FF C8 C1 00 72 1F 22>
Jun 26 12:30:11.78: [32048]: <-- data [7]
Jun 26 12:30:11.78: [32048]: <-- data [2]
Jun 26 12:30:13.08: [32048]: --> [2:OK]
Jun 26 12:30:13.08: [32048]: <-- [9:AT+FTS=7\r]
Jun 26 12:30:13.13: [32048]: --> [2:OK]
Jun 26 12:30:13.13: [32048]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jun 26 12:30:13.13: [32048]: <-- [10:AT+FTM=72\r]
Jun 26 12:30:13.14: [32048]: --> [7:CONNECT]
Jun 26 12:30:13.14: [32048]: <-- data [1024]
Jun 26 12:30:13.16: [32048]: <-- data [326]
Jun 26 12:30:13.16: [32048]: <-- data [2]
Jun 26 12:30:14.96: [32048]: --> [2:OK]
Jun 26 12:30:14.96: [32048]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Jun 26 12:30:14.96: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:15.47: [32048]: --> [7:CONNECT]
Jun 26 12:30:16.64: [32048]: --> HDLC<5:FF C8 21 57 BE>
Jun 26 12:30:16.64: [32048]: --> [2:OK]
Jun 26 12:30:16.64: [32048]: TRAINING succeeded
Jun 26 12:30:16.64: [32048]: SEND begin page
Jun 26 12:30:16.65: [32048]: SEND EOFB
Jun 26 12:30:16.65: [32048]: SEND send frame number 0
.
.
.
Jun 26 12:30:16.66: [32048]: SEND send frame number 86
Jun 26 12:30:16.66: [32048]: MODEM set XON/XOFF/FLUSH: input interpreted,
output disabled
Jun 26 12:30:16.66: [32048]: DELAY 200 ms
Jun 26 12:30:16.86: [32048]: <-- [10:AT+FTM=72\r]
Jun 26 12:30:16.86: [32048]: --> [7:CONNECT]
Jun 26 12:30:16.86: [32048]: <-- data [1025]
.
.
.
Jun 26 12:30:39.53: [32048]: <-- data [1006]
Jun 26 12:30:40.60: [32048]: <-- data [2]
Jun 26 12:30:43.33: [32048]: --> [2:OK]
Jun 26 12:30:43.33: [32048]: MODEM set XON/XOFF/DRAIN: input ignored,
output disabled
Jun 26 12:30:43.33: [32048]: <-- [9:AT+FTS=7\r]
Jun 26 12:30:43.38: [32048]: --> [2:OK]
Jun 26 12:30:43.38: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:44.34: [32048]: --> [7:CONNECT]
Jun 26 12:30:44.34: [32048]: <-- HDLC<7:FF C8 FD F2 00 00 6A>
Jun 26 12:30:44.34: [32048]: <-- data [7]
Jun 26 12:30:44.34: [32048]: <-- data [2]
Jun 26 12:30:44.94: [32048]: --> [2:OK]
Jun 26 12:30:44.94: [32048]: SEND send PPS (partial page signal)
Jun 26 12:30:44.94: [32048]: SEND send MPS (more pages, same document)
Jun 26 12:30:44.94: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:48.04: [32048]: --> [0:]
Jun 26 12:30:48.04: [32048]: MODEM <Empty line>
Jun 26 12:30:48.04: [32048]: MODEM TIMEOUT: waiting for v.21 carrier
Jun 26 12:30:48.04: [32048]: <-- data [1]
Jun 26 12:30:48.04: [32048]: --> [2:]
Jun 26 12:30:48.04: [32048]: --> [2:OK]
Jun 26 12:30:48.04: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:49.00: [32048]: --> [7:CONNECT]
Jun 26 12:30:49.00: [32048]: <-- HDLC<7:FF C8 FD F2 00 00 6A>
Jun 26 12:30:49.00: [32048]: <-- data [7]
Jun 26 12:30:49.00: [32048]: <-- data [2]
Jun 26 12:30:49.60: [32048]: --> [2:OK]
Jun 26 12:30:49.60: [32048]: SEND send PPS (partial page signal)
Jun 26 12:30:49.60: [32048]: SEND send MPS (more pages, same document)
Jun 26 12:30:49.60: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:52.70: [32048]: --> [0:]
Jun 26 12:30:52.70: [32048]: MODEM <Empty line>
Jun 26 12:30:52.70: [32048]: MODEM TIMEOUT: waiting for v.21 carrier
Jun 26 12:30:52.70: [32048]: <-- data [1]
Jun 26 12:30:52.70: [32048]: --> [2:]
Jun 26 12:30:52.70: [32048]: --> [2:OK]
Jun 26 12:30:52.70: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:53.66: [32048]: --> [7:CONNECT]
Jun 26 12:30:53.66: [32048]: <-- HDLC<7:FF C8 FD F2 00 00 6A>
Jun 26 12:30:53.66: [32048]: <-- data [7]
Jun 26 12:30:53.66: [32048]: <-- data [2]
Jun 26 12:30:54.26: [32048]: --> [2:OK]
Jun 26 12:30:54.26: [32048]: SEND send PPS (partial page signal)
Jun 26 12:30:54.26: [32048]: SEND send MPS (more pages, same document)
Jun 26 12:30:54.26: [32048]: <-- [9:AT+FRH=3\r]
Jun 26 12:30:57.36: [32048]: --> [0:]
Jun 26 12:30:57.36: [32048]: MODEM <Empty line>
Jun 26 12:30:57.36: [32048]: MODEM TIMEOUT: waiting for v.21 carrier
Jun 26 12:30:57.36: [32048]: <-- data [1]
Jun 26 12:30:57.36: [32048]: --> [2:]
Jun 26 12:30:57.36: [32048]: --> [2:OK]
Jun 26 12:30:57.36: [32048]: No response to PPS repeated 3 times.
Jun 26 12:30:57.36: [32048]: SEND end page
Jun 26 12:30:57.36: [32048]: <-- [9:AT+FTH=3\r]
Jun 26 12:30:58.32: [32048]: --> [7:CONNECT]
Jun 26 12:30:58.32: [32048]: <-- HDLC<3:FF C8 DF>
Jun 26 12:30:58.32: [32048]: <-- data [3]
Jun 26 12:30:58.32: [32048]: <-- data [2]
Jun 26 12:30:58.81: [32048]: --> [2:OK]
Jun 26 12:30:59.24: [32048]: MODEM input buffering enabled
Jun 26 12:30:59.24: [32048]: SEND FAILED: JOB 124516 DEST 15124160000 ERR
No response to PPS repeated 3 times.; too many attempts to send
Jun 26 12:30:59.24: [32048]: <-- [5:ATH0\r]
Jun 26 12:30:59.38: [32048]: --> [2:OK]
Jun 26 12:30:59.42: [32048]: MODEM set DTR OFF
Jun 26 12:30:59.42: [32048]: SESSION END
CONFIDENTIALITY NOTICE: This e-mail, including attachments,
is for the sole use of the individual to whom it is addressed.
This message is confidential and may contain information that
is privileged, confidential and is exempt from disclosure under
applicable law. Any unauthorized review, use, disclosure or
distribution is prohibited. If you have received this e-mail
in error, please notify the sender by reply e-mail and destroy
this message and its attachments.
____________________ HylaFAX(tm) Users Mailing List _______________________
To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
*To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*