[hylafax-users] Hylafax does noch deliver incoming faxes

[Klaus Rörig <hylafax@xxxxxxxxxxxxxxxxxxxxx>]

Hi!

Yesterday afternoon I had to reboot our new fax-server (HylaFax 4.3.0)
because I wanted to move it to another place.

Since this moment Hylafax refuses to deliver incoming faxes to users.
The faxes are recieved an put to recq as tif-file, buts that's all it does
now. I haven't changed any config and till this reboot everything worked
fine.

Here is a copy from capifax.log:

---
Jun 20 09:03:30.23: [ 8076]: c2faxrecv - INFO:
C4H-Version 01.03.00 (32Bit).

Jun 20 09:03:30.23: [ 8076]: c2faxrecv - INFO: The SpoolDirectory is
/var/spool/hylafax.
Jun 20 09:03:30.23: [ 8076]: c2faxrecv - INFO: Changed to effective user
"uucp" and group "dialout" succesfully.
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO:
Device "faxCAPI11" uses 1 receive thread(s) with the following config:
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO: Controller=1 : DDIOffset=5
: DDILen=4
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO:
Device "faxCAPI12" uses 1 receive thread(s) with the following config:
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO: Controller=1 : DDIOffset=5
: DDILen=4
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO:
Device "faxCAPI21" uses 1 receive thread(s) with the following config:
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO: Controller=2 : DDIOffset=5
: DDILen=4
Jun 20 09:03:30.24: [ 8076]: c2faxrecv - INFO:
Device "faxCAPI22" uses 1 receive thread(s) with the following config:
Jun 20 09:03:30.25: [ 8076]: c2faxrecv - INFO: Controller=2 : DDIOffset=5
: DDILen=4
Jun 20 09:03:30.25: [ 8076]: c2faxrecv - INFO:
Started in Hylafax mode and waiting on incoming calls.
Jun 20 09:14:17.11: [ 8076]: c2faxrecv - INFO: SESSION BEGIN 000000098 (null)
Jun 20 09:14:17.11: [ 8076]: c2faxrecv - INFO: Incoming analog call on
controller 1 to 0418.
Jun 20 09:14:26.43: [ 8076]: c2faxrecv - INFO: Connection established.
Jun 20 09:14:26.43: [ 8076]: c2faxrecv - INFO:  StationID = +49219XXXXXXX
Jun 20 09:14:26.43: [ 8076]: c2faxrecv - INFO:  BaudRate  = 14400
Jun 20 09:14:26.43: [ 8076]: c2faxrecv - INFO:  Flags     = HighRes,
MMR_compr
Jun 20 09:14:26.43: [ 8076]: c2faxrecv - INFO: Write fax in path
/var/spool/hylafax to file recvq/fax00043.tif.
Jun 20 09:14:34.35: [ 8076]: c2faxrecv - INFO: Page 1 was received. - Last
Page!
---

Normally there should be a line 'Calling faxrecvd' with some arguments,
but there's nothing.

Any idea?

Klaus

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*