HylaFAX The world's most advanced open source fax server

[Date Prev][Date Next][Thread Prev][Thread Next] [Date Index] [Thread Index]

[hylafax-users] modem fails to connect every time



I'm seeing a problem where an incoming fax from a particular number fails everytime.  I don't know the make/model of the remote fax machine yet.  The log file is pasted below.  Any ideas?
 
I am using the t38modem version 0.8.2.
 
-Mike Noel
 
Jun 14 11:06:11.44: [15658]: SESSION BEGIN 000612258
Jun 14 11:06:11.44: [15658]: HylaFAX (tm) Version 4.2.0
Jun 14 11:06:11.44: [15658]: <-- [4:ATA\r]
Jun 14 11:06:15.81: [15658]: --> [7:CONNECT]
Jun 14 11:06:15.81: [15658]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyy2'
Jun 14 11:06:15.81: [15658]: STATE CHANGE: ANSWERING -> RECEIVING
Jun 14 11:06:15.81: [15658]: MODEM input buffering enabled
Jun 14 11:06:15.81: [15658]: RECV FAX: begin
Jun 14 11:06:15.81: [15658]: MODEM input buffering disabled
Jun 14 11:06:15.81: [15658]: <-- HDLC<32:FF C0 04 AD 00 55 12 9E 36 86 62 82 1A 04 14 2E B6 94 04 6A A6 4E CE 96 F6 76 04 2C 74 4C 74 0C>
Jun 14 11:06:15.81: [15658]: <-- data [32]
Jun 14 11:06:15.81: [15658]: <-- data [2]
Jun 14 11:06:17.60: [15658]: --> [7:CONNECT]
Jun 14 11:06:17.60: [15658]: <-- HDLC<23:FF C0 02 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04 04>
Jun 14 11:06:17.60: [15658]: <-- data [23]
Jun 14 11:06:17.60: [15658]: <-- data [2]
Jun 14 11:06:18.32: [15658]: --> [7:CONNECT]
Jun 14 11:06:18.32: [15658]: <-- HDLC<10:FF C8 01 00 76 5F 23 01 FB C0>
Jun 14 11:06:18.32: [15658]: <-- data [10]
Jun 14 11:06:18.32: [15658]: <-- data [2]
Jun 14 11:06:18.73: [15658]: --> [2:OK]
Jun 14 11:06:18.73: [15658]: <-- [9:AT+FRH=3\r]
Jun 14 11:06:19.70: [15658]: --> [7:CONNECT]
Jun 14 11:06:20.84: [15658]: --> HDLC<12:FF C0 C4 B5 00 A8 00 01 05 00 FC CA>
Jun 14 11:06:20.84: [15658]: --> [2:OK]
Jun 14 11:06:20.84: [15658]: <-- [9:AT+FRH=3\r]
Jun 14 11:06:20.84: [15658]: --> [7:CONNECT]
Jun 14 11:06:21.59: [15658]: --> HDLC<25:FF C0 C2 04 04 04 04 04 04 04 04 4C 0C 0C 4C 04 AC CC EC 04 8C 0C 6C FB 6F>
Jun 14 11:06:21.59: [15658]: --> [2:OK]
Jun 14 11:06:21.59: [15658]: REMOTE TSI "XXX XXX XXXX"
Jun 14 11:06:21.59: [15658]: <-- [9:AT+FRH=3\r]
Jun 14 11:06:21.59: [15658]: --> [7:CONNECT]
Jun 14 11:06:21.99: [15658]: --> HDLC<12:FF C8 C1 00 44 19 01 01 01 00 44 F6>
Jun 14 11:06:21.99: [15658]: --> [2:OK]
Jun 14 11:06:21.99: [15658]: REMOTE wants 14400 bit/s
Jun 14 11:06:21.99: [15658]: REMOTE wants A4 page width (215 mm)
Jun 14 11:06:21.99: [15658]: REMOTE wants unlimited page length
Jun 14 11:06:21.99: [15658]: REMOTE wants 3.85 line/mm
Jun 14 11:06:21.99: [15658]: REMOTE wants 1-D MH
Jun 14 11:06:21.99: [15658]: RECV training at v.17 14400 bit/s
Jun 14 11:06:21.99: [15658]: <-- [11:AT+FRM=145\r]
Jun 14 11:06:26.48: [15658]: --> [0:]
Jun 14 11:06:26.48: [15658]: MODEM <Empty line>
Jun 14 11:06:26.48: [15658]: MODEM TIMEOUT: receiving TCF
Jun 14 11:06:26.48: [15658]: <-- data [1]
Jun 14 11:06:26.48: [15658]: --> [2:OK]
Jun 14 11:06:26.48: [15658]: DELAY 75 ms
Jun 14 11:06:26.56: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:26.66: [15658]: --> [5:ERROR]
Jun 14 11:06:26.66: [15658]: TRAINING failed
Jun 14 11:06:26.66: [15658]: <-- [9:AT+FRH=3\r]
Jun 14 11:06:26.76: [15658]: --> [5:ERROR]
Jun 14 11:06:26.76: [15658]: MODEM Command error
Jun 14 11:06:26.76: [15658]: DELAY 1500 ms
Jun 14 11:06:28.26: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:28.36: [15658]: --> [5:ERROR]
Jun 14 11:06:28.36: [15658]: DELAY 1500 ms
Jun 14 11:06:29.86: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:29.96: [15658]: --> [5:ERROR]
Jun 14 11:06:29.96: [15658]: DELAY 1500 ms
Jun 14 11:06:31.46: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:31.56: [15658]: --> [5:ERROR]
Jun 14 11:06:31.56: [15658]: DELAY 1500 ms
Jun 14 11:06:33.06: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:33.16: [15658]: --> [5:ERROR]
Jun 14 11:06:33.16: [15658]: DELAY 1500 ms
Jun 14 11:06:34.66: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:34.76: [15658]: --> [5:ERROR]
Jun 14 11:06:34.76: [15658]: DELAY 1500 ms
Jun 14 11:06:36.26: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:36.36: [15658]: --> [5:ERROR]
Jun 14 11:06:36.36: [15658]: DELAY 1500 ms
Jun 14 11:06:37.86: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:37.96: [15658]: --> [5:ERROR]
Jun 14 11:06:37.96: [15658]: DELAY 1500 ms
Jun 14 11:06:39.46: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:39.56: [15658]: --> [5:ERROR]
Jun 14 11:06:39.56: [15658]: DELAY 1500 ms
Jun 14 11:06:41.06: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:41.16: [15658]: --> [5:ERROR]
Jun 14 11:06:41.16: [15658]: DELAY 1500 ms
Jun 14 11:06:42.66: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:42.76: [15658]: --> [5:ERROR]
Jun 14 11:06:42.76: [15658]: DELAY 1500 ms
Jun 14 11:06:44.26: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:44.36: [15658]: --> [5:ERROR]
Jun 14 11:06:44.36: [15658]: DELAY 1500 ms
Jun 14 11:06:45.86: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:45.96: [15658]: --> [5:ERROR]
Jun 14 11:06:45.96: [15658]: DELAY 1500 ms
Jun 14 11:06:47.46: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:47.56: [15658]: --> [5:ERROR]
Jun 14 11:06:47.56: [15658]: DELAY 1500 ms
Jun 14 11:06:49.06: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:49.16: [15658]: --> [5:ERROR]
Jun 14 11:06:49.16: [15658]: DELAY 1500 ms
Jun 14 11:06:50.66: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:50.76: [15658]: --> [5:ERROR]
Jun 14 11:06:50.76: [15658]: DELAY 1500 ms
Jun 14 11:06:52.26: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:52.36: [15658]: --> [5:ERROR]
Jun 14 11:06:52.36: [15658]: DELAY 1500 ms
Jun 14 11:06:53.86: [15658]: <-- [9:AT+FTH=3\r]
Jun 14 11:06:53.96: [15658]: --> [5:ERROR]
Jun 14 11:06:53.96: [15658]: RECV FAX: Failure to train modems
Jun 14 11:06:53.96: [15658]: RECV FAX: end
Jun 14 11:06:53.96: [15658]: SESSION END
____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


Project hosted by iFAX Solutions