HylaFAX The world's most advanced open source fax server |
Thank you Lee, your string is working :) I added it to ModemDialCmd... so it quite dynamic for me... -----Original Message----- From: Lee Howard [mailto:faxguy@xxxxxxxxxxxxxxxx] Sent: Tuesday, June 06, 2006 2:51 PM To: Vitaly Nikolaev Cc: hylafax-users@xxxxxxxxxxx Subject: Re: [hylafax-users] Outgoing caller id while sending fax with Diva T1 server Vitaly Nikolaev wrote: > > I am trying to set outgoing Caller ID for fax that are sending with > Eicon Diva Server T1/PRI-8M (8 Port), > > > > So fax on another side of T1 I see empty CID, there is must be AT > command that will set caller id or some other way. I went though > google and hylafax/eicon webs and did not find anything useful. > Having looked at the AT command reference a couple of weeks ago about this very thing I determined that it was AT+iO<number>. So if you want the outgoing Caller*ID to always be the same thing then adding: ModemResetCmds: AT+iO8885551212 to your modem config file should do the trick. If you want to assign that number on a per-user or per-job (or whatever) basis, then there's a new config feature and sendfax options in HylaFAX+ 4.3.0.3. In the modem config file it's "ModemSetOriginCmd". You use it like this: ModemSetOriginCmd: AT+iO%d HylaFAX replaces the "%d" in that command with the specified FAXNUMBER used in the hfaxd communication (sendfax -u). It uses that in the call setup and modem initialization. If you don't use sendfax or don't want the user to set this then you can use JobControls to set this without the %d and specify the number. Lee. ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*