Re: [hylafax-users] Mainpine Rockforce DUO+ Wedge

["andrew rinaldi" <andrew.rinaldi@xxxxxxxxxxxx>]

Hi Alex.

 

Please ensure that you have completed the online questionnaire;

 

http://www.mainpine.com/supportquestionnaire.php

 

And include details of how you have configured and installed your board (did you include the multiport register ?);

 

http://www.mainpine.com/faqs/linux_ans/ans1_linux.htm

 

Regards

 

ANDREW RINALDI

Mainpine Ltd. Support

USA +1 718 701 2422 | Asia/Europe +44 1225 436137 

andrew.rinaldi@xxxxxxxxxxxx | www.mainpine.com

---

From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of Alex Koh
Sent: 24 May 2006 06:28
To: Hylafax Users Mailing List
Subject: [hylafax-users] Mainpine Rockforce DUO+ Wedge

Hi,

 

I am using rockforce duo+ card with hylafax 4.2.5, redhat 8.0 with recompiled kernel 2.4.23 on a Via M10000 ITX board with a single PCI riser card.

 

I managed to replicate the “wedged” problem EVERYTIME using this:

1) port A sends to port B

2) port B sends to port A

When both sends AT THE SAME TIME, after a while, hylafax will not be able to initialize 1 of the port, while the other port still works.

 

Anyone else encountering this same problem?

 

Alex Koh

ps: this email is also sent to Mainpine support

 

========================================

 

Some logs in /var/log/messages:

 

May 24 10:29:12 Innofax FaxGetty[11910]: MODEM MAINPINE VENUS V.92 I03.04.02 (0026SD) VOICE V2 V92CAP 12NS RAM MERCURY Mainpine Venus V.92 I03.04.02 (0026SD) Voice V2 V92cap 12ns RAM Mercury/

May 24 10:29:12 Innofax FaxGetty[11910]: <-- [5:ATM0\r]

May 24 10:29:12 Innofax FaxGetty[11910]: --> [2:OK]

May 24 10:29:12 Innofax FaxGetty[11910]: <-- [14:AT+F34=14,1,2\r]

May 24 10:29:12 Innofax FaxGetty[11910]: --> [2:OK]

May 24 10:29:12 Innofax FaxGetty[11910]: STATE CHANGE: LOCKWAIT -> RUNNING (timeout 30)

May 24 12:53:19 Innofax FaxGetty[20495]: /dev/ttyS5: Can not initialize modem.

May 24 12:53:19 Innofax FaxGetty[20495]: STATE CHANGE: LOCKWAIT -> MODEMWAIT (timeout 30)

May 24 12:53:19 Innofax FaxGetty[20495]: QUIT

May 24 12:53:19 Innofax FaxGetty[20495]: CLOSE /dev/ttyS5

May 24 12:53:19 Innofax FaxGetty[15360]: OPEN /dev/ttyS5  HylaFAX (tm) Version 4.2.5

May 24 12:53:20 Innofax FaxGetty[15360]: MODEM set DTR OFF

May 24 12:53:20 Innofax FaxGetty[15360]: DELAY 75 ms

May 24 12:53:20 Innofax FaxGetty[15360]: MODEM set DTR ON

May 24 12:53:20 Innofax FaxGetty[15360]: DELAY 2600 ms

May 24 12:53:24 Innofax FaxGetty[15360]: MODEM set baud rate: 57600 baud, input flow RTS/CTS, output flow RTS/CTS

May 24 12:53:24 Innofax FaxGetty[15360]: DELAY 10 ms

May 24 12:53:24 Innofax FaxGetty[15360]: MODEM flush i/o

May 24 12:53:24 Innofax FaxGetty[15360]: <-- [4:ATZ\r]

May 24 12:53:54 Innofax FaxGetty[15360]: MODEM TIMEOUT: reading line from modem

May 24 12:53:54 Innofax FaxGetty[15360]: MODEM <Timeout>

May 24 12:53:54 Innofax FaxGetty[15360]: MODEM set DTR OFF

May 24 12:53:54 Innofax FaxGetty[15360]: DELAY 75 ms

May 24 12:53:54 Innofax FaxGetty[15360]: MODEM set DTR ON

May 24 12:53:54 Innofax FaxGetty[15360]: DELAY 2600 ms

May 24 12:56:42 Innofax FaxGetty[15360]: MODEM set baud rate: 57600 baud, input flow RTS/CTS, output flow RTS/CTS

May 24 12:56:42 Innofax FaxGetty[15360]: DELAY 10 ms

May 24 12:56:42 Innofax FaxGetty[15360]: MODEM flush i/o

May 24 12:56:42 Innofax FaxGetty[15360]: <-- [4:ATZ\r]

May 24 12:57:12 Innofax FaxGetty[15360]: MODEM TIMEOUT: reading line from modem

May 24 12:57:12 Innofax FaxGetty[15360]: MODEM <Timeout>

May 24 12:57:12 Innofax FaxGetty[15360]: MODEM set DTR OFF

May 24 12:58:14 Innofax FaxGetty[15360]: /dev/ttyS5: Can not initialize modem.

May 24 12:58:14 Innofax FaxGetty[15360]: STATE CHANGE: BASE -> MODEMWAIT (timeout 30)

May 24 12:58:14 Innofax FaxGetty[15360]: QUIT

May 24 12:58:14 Innofax FaxGetty[15360]: CLOSE /dev/ttyS5