![]() |
Hi RaFFe, Make sure you have installed the driver properly and you can communicate using Minicom for example before you even try Hylafax. I have an old configuration working for the last 4 years with this board. It is pretty good. I remember I had similar problems as you at the time - the driver provided was problematic - the firmware wasn't good by some reason - I ended up using the firmware from the diagnostic disk. Modems still working very good - I get extremely rarely 'wedged' ports (compared to my recent Perle board which was supposed to be better). Regards, Ivan -----Original Message----- From: hylafax-users-bounce@xxxxxxxxxxx [mailto:hylafax-users-bounce@xxxxxxxxxxx] On Behalf Of RaFFe Sent: May 20, 2006 10:53 AM To: hylafax-users@xxxxxxxxxxx Subject: [hylafax-users] [hylafax-user] sample configuration file for rocketmodem II PCI Hej, I've buy a rocketmodem II 6 port recently. Installation and diagnostic ok but hylafax cannot configure it. It said that it "wait for modem to come ready". I've reused my old config.tty* file that I've deploy for my old isa rocketmodem 4 port card but that don't work. When I used the faxaddmodem utility, it cannot determine speed of each modems and fail to add modems. Someone have an idea of the problem ? RaFFe ___________________________________________________________________________ Faites de Yahoo! votre page d'accueil sur le web pour retrouver directement vos services préférés : vérifiez vos nouveaux mails, lancez vos recherches et suivez l'actualité en temps réel. Rendez-vous sur http://fr.yahoo.com/set ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx* ____________________ HylaFAX(tm) Users Mailing List _______________________ To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*