[hylafax-users] Problem with Minolta fax

[Matthias Reich <rei@xxxxxxxx>]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Hi list,
we have a problem here sending a fax to a Minolta fax
with hylafax 4.2.5.

Has anyone an idea which parameters can be changed to successfully send a fax 
to that destination ?
Any help appreciated.

Below follows a log-file:

May 15 09:20:18.58: [11572]: <-- [12:AT+FCLASS=1\r]
May 15 09:20:18.58: [11572]: --> [2:OK]
May 15 09:20:18.58: [11572]: DIAL 0704224395
May 15 09:20:18.59: [11572]: <-- [17:ATDT0,0704224395\r]
May 15 09:20:53.97: [11572]: --> [7:CONNECT]
May 15 09:20:55.24: [11572]: --> HDLC<9:FF C0 04 3D CA 80 0E 92 79>
May 15 09:20:55.24: [11572]: --> [2:OK]
May 15 09:20:55.24: [11572]: REMOTE NSF "BC 53 01 70"
May 15 09:20:55.24: [11572]: NSF remote fax equipment: Minolta 
May 15 09:20:55.24: [11572]: <-- [9:AT+FRH=3\r]
May 15 09:20:55.25: [11572]: --> [7:CONNECT]
May 15 09:20:55.94: [11572]: --> HDLC<25:FF C0 02 AC 9C CC 2C 4C 4C 2C 0C EC 
0C 04 04 04 04 04 04 04 04 04 04 8C 38>
May 15 09:20:55.94: [11572]: --> [2:OK]
May 15 09:20:55.94: [11572]: REMOTE CSI "0704224395"
May 15 09:20:55.94: [11572]: <-- [9:AT+FRH=3\r]
May 15 09:20:55.95: [11572]: --> [7:CONNECT]
May 15 09:20:56.22: [11572]: --> HDLC<9:FF C8 01 00 73 2D 00 43 81>
May 15 09:20:56.22: [11572]: --> [2:OK]
May 15 09:20:56.22: [11572]: REMOTE best rate 9600 bit/s
May 15 09:20:56.22: [11572]: REMOTE max A4 page width (215 mm)
May 15 09:20:56.22: [11572]: REMOTE max B4 page length (364 mm)
May 15 09:20:56.22: [11572]: REMOTE best vres 7.7 line/mm
May 15 09:20:56.22: [11572]: REMOTE format support: MH, MR
May 15 09:20:56.22: [11572]: REMOTE best 20 ms, 10 ms/scanline
May 15 09:20:56.22: [11572]: USE 9600 bit/s
May 15 09:20:56.22: [11572]: SEND file "docq/doc78772.ps;c0"
May 15 09:20:56.22: [11572]: USE A4 page width (215 mm)
May 15 09:20:56.22: [11572]: USE A4 page length (297 mm)
May 15 09:20:56.22: [11572]: USE 3.85 line/mm
May 15 09:20:56.22: [11572]: USE 2-D MR
May 15 09:20:56.22: [11572]: USE 20 ms/scanline
May 15 09:20:56.22: [11572]: SEND training at v.29 9600 bit/s
May 15 09:20:56.22: [11572]: DELAY 70 ms
May 15 09:20:56.29: [11572]: <-- [9:AT+FTH=3\r]
May 15 09:20:57.24: [11572]: --> [7:CONNECT]
May 15 09:20:57.24: [11572]: <-- HDLC<23:FF C0 C2 2E 4E 86 E6 2E 2E AE 2E CA 
04 E2 A6 04 CA F2 E2 82 12 04 04>
May 15 09:20:57.24: [11572]: <-- data [23]
May 15 09:20:57.24: [11572]: <-- data [2]
May 15 09:20:57.24: [11572]: --> [7:CONNECT]
May 15 09:20:57.24: [11572]: <-- HDLC<6:FF C8 C1 00 60 00>
May 15 09:20:57.24: [11572]: <-- data [6]
May 15 09:20:57.24: [11572]: <-- data [2]
May 15 09:20:58.52: [11572]: --> [2:OK]
May 15 09:20:58.52: [11572]: DELAY 70 ms
May 15 09:20:58.59: [11572]: <-- [10:AT+FTM=96\r]
May 15 09:20:58.59: [11572]: --> [7:CONNECT]
May 15 09:20:58.59: [11572]: DELAY 400 ms
May 15 09:20:58.99: [11572]: <-- data [1024]
May 15 09:20:59.01: [11572]: <-- data [776]
May 15 09:20:59.02: [11572]: <-- data [2]
May 15 09:21:00.56: [11572]: --> [2:OK]
May 15 09:21:00.56: [11572]: <-- [9:AT+FRH=3\r]
May 15 09:21:00.71: [11572]: --> [7:CONNECT]
May 15 09:21:01.88: [11572]: --> HDLC<5:FF C8 21 57 BE>
May 15 09:21:01.88: [11572]: --> [2:OK]
May 15 09:21:01.88: [11572]: TRAINING succeeded
May 15 09:21:01.88: [11572]: DELAY 75 ms
May 15 09:21:01.96: [11572]: <-- [10:AT+FTM=96\r]
May 15 09:21:01.96: [11572]: --> [7:CONNECT]
May 15 09:21:01.96: [11572]: DELAY 400 ms
May 15 09:21:02.36: [11572]: SEND begin page
May 15 09:21:02.45: [11572]: Reading MMR-compressed image file
May 15 09:21:02.51: [11572]: <-- data [2]
May 15 09:21:02.51: [11572]: SENT 2 bytes of data
May 15 09:21:02.51: [11572]: <-- data [4]
May 15 09:21:02.51: [11572]: SENT 4 bytes of data
May 15 09:21:02.51: [11572]: <-- data [2]
May 15 09:21:02.51: [11572]: SENT 2 bytes of data

[... DATA is send ...]

May 15 09:23:51.62: [11572]: SENT 4 bytes of data
May 15 09:23:51.62: [11572]: <-- data [344]
May 15 09:23:51.85: [11572]: SENT 344 bytes of data
May 15 09:23:51.85: [11572]: SEND 2D RTC
May 15 09:23:51.85: [11572]: <-- data [30]
May 15 09:23:51.85: [11572]: <-- data [2]
May 15 09:23:51.85: [11572]: SEND end page
May 15 09:23:53.87: [11572]: --> [2:OK]
May 15 09:23:53.87: [11572]: DELAY 90 ms
May 15 09:23:53.96: [11572]: SEND send EOP (no more pages or documents)
May 15 09:23:53.96: [11572]: <-- [9:AT+FTH=3\r]
May 15 09:23:54.91: [11572]: --> [7:CONNECT]
May 15 09:23:54.91: [11572]: <-- HDLC<3:FF C8 F4>
May 15 09:23:54.91: [11572]: <-- data [3]
May 15 09:23:54.91: [11572]: <-- data [2]
May 15 09:23:55.41: [11572]: --> [2:OK]
May 15 09:23:55.41: [11572]: <-- [9:AT+FRH=3\r]
May 15 09:23:55.70: [11572]: --> [7:CONNECT]
May 15 09:23:56.86: [11572]: --> HDLC<5:FF C8 32 75 EC>
May 15 09:23:56.86: [11572]: --> [2:OK]
May 15 09:23:56.86: [11572]: SEND recv RTN (retrain negative)
May 15 09:23:56.86: [11572]: Unable to transmit page (giving up after RTN)
May 15 09:23:56.86: [11572]: <-- [9:AT+FTH=3\r]
May 15 09:23:57.82: [11572]: --> [7:CONNECT]
May 15 09:23:57.82: [11572]: <-- HDLC<3:FF C8 DF>
May 15 09:23:57.82: [11572]: <-- data [3]
May 15 09:23:57.82: [11572]: <-- data [2]
May 15 09:23:58.32: [11572]: --> [2:OK]
May 15 09:23:58.32: [11572]: MODEM input buffering enabled
May 15 09:23:58.32: [11572]: <-- [5:ATH0\r]
May 15 09:23:58.46: [11572]: --> [2:OK]
May 15 09:23:58.46: [11572]: MODEM set DTR OFF
May 15 09:23:58.46: [11572]: SESSION END


- -- 
HAGOS eG                 phone: +49 711 7880592
Matthias Reich             fax: +49 711 7880535
Industriestr. 62           web: http://www.hagos.de
D-70565 Stuttgart         mail: rei@xxxxxxxx
Germany
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQFEaC3AcjMVLPQ5oUkRAl7kAJ96GJpk3HhEjDFLBR9mzmJ3Bd4N3wCcDRmU
X050pwJZVbJX3VF4AGDwF8Q=
=AjDk
-----END PGP SIGNATURE-----

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*