Re: [hylafax-users] Receiving, but not sending

[Sim Zacks <sim@xxxxxxxxxxxxxx>]

Try accessing your modem using minicom or other terminal program.
I had a problem once where for some weird reason my modem switched
from Com1 to Com2.
Look in dmesg to see which tty it is connected to.

Sim
________________________________________________________________________________

Hi list,

Weird problem. I've been running Hylafax just fine on my Debian box for
a while now, but the other day I noticed that I'm no longer able to
send faxes with it. Receiving faxes, however, is not a problem.

Some quick facts:

 Hardware        : AVM Fritz!Card PCI
 fcpci module    : compiled and installed
 Debian version  : sarge (stable), up to date
 Kernel          : 2.6.8-3-k7
 Hylafax-server  : 4.2.1-5sarge3
 capi4hylafax    : 01.02.03-10
 libtiff.so.3.6.1: patched version installed

After trying to send, I always get the following error message in my
syslog, and as a Hylafax failure sent by email:

 FaxQueuer[26779]: JOB 7: REJECT: Too many attempts to dial: 12, max 12
 FaxQueuer[26779]: NOTIFY: bin/notify "doneq/q7" "rejected" ""
 FaxQueuer[26779]: NOTIFY exit status: 0 (28999)

I tried setting ServerTracing to 0x03FFFF, but notice no more that the
above errors in the log; everything looks fine up until that reject
line. Also, while Hylafax is supposedly making those dial attempts, it
never takes the phone off-hook (no ISDN activity); c2faxsend doesn't
seem to be accessing the ISDN card at all.

I even tried reverting to kernel 2.6.8-2-k7, which I'm has definitely
worked for me in the past with Hylafax and the fcpci module that I
compiled against it (for capi4hylafax), but without success.

Dmesg also shows that the modules loaded okay:

 ISDN subsystem Rev: 1.1.2.3/1.1.2.3/1.1.2.2/1.1.2.3/1.1.2.2/1.1.2.2
   loaded
 CAPI Subsystem Rev 1.1.2.8
 fcpci: module license 'Proprietary' taints kernel.
 fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2
 fcpci: (fcpci built on Dec 18 2004 at 21:30:46)
 PCI: Enabling device 0000:00:0c.0 (0000 -> 0003)
 ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 9 (level, low) -> IRQ 9
 fcpci: AVM FRITZ!Card PCI found: port 0xa000, irq 9
 fcpci: Loading...
 fcpci: Driver 'fcpci' attached to stack. (152)
 fcpci: Stack version 3.11-02
 kcapi: Controller 1: fcpci-a000-09 attached
 kcapi: card 1 "fcpci-a000-09" ready.
 fcpci: Loaded.
 capifs: Rev 1.1.2.3
 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)

I'm stumped. Any ideas what might be the problem here?

Thanks!

Jaap

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*


____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*