[hylafax-users] COMREC Invalid response to PPS with HSF Linuxant modem

To: hylafax-users@xxxxxxxxxxx
Subject: [hylafax-users] COMREC Invalid response to PPS with HSF Linuxant modem
From: indhu <indhu@xxxxxxxxxxxxxx>
Date: Wed, 08 Mar 2006 12:45:02 +0200

Hi, 

I use  2 numbers of Conexant HSF 56k HSFi Modems with  hylafax-4.2.3 on
Fedora core 4 (2.6.11-1.1369_FC4smp) for outgoing fax. 
I use the linuxant driver (licensed - full version) for these modems
The modems are configured as Class1 modems
I receive the following errors for some outgoing fax.

1.SEND: COMREC invalid response received to PPS.; Giving up after 3
attempts to send same page "docq/doc572.ps;c1", dirnum 0
2.  SEND: No response to PPS repeated 3 times.; Giving up after 3
attempts to send same page "docq/doc573.ps;c1", dirnum 0
3.SEND: No response to MPS repeated 3 tries; Giving up after 3 attempts
to send same page "docq/doc598.ps;c1", dirnum 0

The modem configuration file, and the session logs are attached 
Can any one please help in solving this problem ?

Note:(I use 5 nos of USB modems for incoming fax)

Thanks and regards,
Indhu

# $Id: conexant-1.0,v 1.1 2005/05/18 17:20:09 lhoward Exp $

#
# Configuration for a Rockwell/Conexant K56 Class 1.0 modem using
# the RCV56DPF and similar chipsets.  These chipsets are generally
# flash- upgradable and appear on ISA as well as PCI.  They
# support "Class 1.0" which means that they have "adaptive receive"
# (AT+FAR=1), but not V.34.
#
#    Comtrol RocketModem II/III
#    MultiTech MT5600ZDX
#    Zoltrix FMVSP56i3
#
#
CountryCode:            27
AreaCode:               31
FAXNumber:              +27.31.3281121
LongDistancePrefix:     0
InternationalPrefix:    09
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      1
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        NothingSetup
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
#
#
# Modem-related stuff: should reflect modem command interface
# and hardware connection/cabling (e.g. flow control).
#
ModemType:              Class1.0        # use this to supply a hint
ModemRate:              19200           # rate for DCE-DTE communication
ModemFlowControl:       rtscts          # default
#
ModemNoFlowCmd:         AT&K0           # setup no flow control
ModemHardFlowCmd:       AT&K3           # setup hardware flow control
ModemSoftFlowCmd:       AT&K4           # setup software flow control
ModemSetupDTRCmd:       AT&D2           # setup so DTR drop resets modem
ModemSetupDCDCmd:       AT&C1           # setup so DCD reflects carrier (or not)
#
Class1AdaptRecvCmd:     AT+FAR=1        # reports carrier detection mismatches
ModemDialCmd:           ATDT0%s

Mar 08 09:56:07.01: [ 4347]: SESSION BEGIN 000001475 27488815388
Mar 08 09:56:07.01: [ 4347]: HylaFAX (tm) Version 4.2.3rc1
Mar 08 09:56:07.01: [ 4347]: SEND FAX: JOB 597 DEST 0488815388 COMMID 000001475 DEVICE '/dev/ttySHSF1' FROM '*************' USER newlunar
Mar 08 09:56:07.01: [ 4347]: <-- [14:AT+FCLASS=1.0\r]
Mar 08 09:56:07.03: [ 4347]: --> [2:OK]
Mar 08 09:56:07.03: [ 4347]: DIAL 0488815388
Mar 08 09:56:07.03: [ 4347]: <-- [16:ATDT00488815388\r]
Mar 08 09:56:43.65: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:45.41: [ 4347]: --> [2:OK]
Mar 08 09:56:45.41: [ 4347]: REMOTE NSF "00 00 0E 00 00 00 96 0F 01 03 00 10 05 02 95 C8 08 01 49 02 56 69 63 74 6F 72 69 61 4D 61 6E 6F 72 2F 54 75 03"
Mar 08 09:56:45.41: [ 4347]: NSF remote fax equipment: Panasonic KX-F230/KX-FT21
Mar 08 09:56:45.41: [ 4347]: NSF remote station ID: "VictoriaManor/Tu"
Mar 08 09:56:45.41: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:56:45.43: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:46.15: [ 4347]: --> [2:OK]
Mar 08 09:56:46.15: [ 4347]: REMOTE CSI "027 48 8815388"
Mar 08 09:56:46.15: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:56:46.17: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:46.55: [ 4347]: --> [2:OK]
Mar 08 09:56:46.55: [ 4347]: REMOTE best rate 9600 bit/s
Mar 08 09:56:46.55: [ 4347]: REMOTE max A4 page width (215 mm)
Mar 08 09:56:46.55: [ 4347]: REMOTE max unlimited page length
Mar 08 09:56:46.55: [ 4347]: REMOTE best vres 15.4 line/mm
Mar 08 09:56:46.55: [ 4347]: REMOTE format support: MH, MR
Mar 08 09:56:46.55: [ 4347]: REMOTE best 20 ms, 10 ms/scanline
Mar 08 09:56:46.55: [ 4347]: USE 9600 bit/s
Mar 08 09:56:46.55: [ 4347]: SEND file "docq/doc598.ps;c1"
Mar 08 09:56:46.55: [ 4347]: USE A4 page width (215 mm)
Mar 08 09:56:46.55: [ 4347]: USE unlimited page length
Mar 08 09:56:46.55: [ 4347]: USE 7.7 line/mm
Mar 08 09:56:46.55: [ 4347]: USE 2-D MR
Mar 08 09:56:46.55: [ 4347]: USE 10 ms/scanline
Mar 08 09:56:46.55: [ 4347]: SEND training at v.29 9600 bit/s
Mar 08 09:56:46.55: [ 4347]: <-- [9:AT+FRS=7\r]
Mar 08 09:56:46.75: [ 4347]: --> [2:OK]
Mar 08 09:56:46.75: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:56:47.06: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:47.06: [ 4347]: <-- data [23]
Mar 08 09:56:47.06: [ 4347]: <-- data [2]
Mar 08 09:56:48.64: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:48.64: [ 4347]: <-- data [6]
Mar 08 09:56:48.64: [ 4347]: <-- data [2]
Mar 08 09:56:49.11: [ 4347]: --> [2:OK]
Mar 08 09:56:49.11: [ 4347]: <-- [9:AT+FTS=7\r]
Mar 08 09:56:49.26: [ 4347]: --> [2:OK]
Mar 08 09:56:49.26: [ 4347]: <-- [10:AT+FTM=96\r]
Mar 08 09:56:49.28: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:49.28: [ 4347]: <-- data [1024]
Mar 08 09:56:49.28: [ 4347]: <-- data [776]
Mar 08 09:56:49.28: [ 4347]: <-- data [2]
Mar 08 09:56:51.28: [ 4347]: --> [2:OK]
Mar 08 09:56:51.28: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:56:52.39: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:53.71: [ 4347]: --> [2:OK]
Mar 08 09:56:53.71: [ 4347]: TRAINING succeeded
Mar 08 09:56:53.71: [ 4347]: DELAY 200 ms
Mar 08 09:56:53.91: [ 4347]: <-- [10:AT+FTM=96\r]
Mar 08 09:56:54.23: [ 4347]: --> [7:CONNECT]
Mar 08 09:56:54.23: [ 4347]: SEND begin page
Mar 08 09:56:54.23: [ 4347]: Reading MMR-compressed image file
Mar 08 09:56:54.24: [ 4347]: <-- data [74]
Mar 08 09:56:54.24: [ 4347]: SENT 74 bytes of data
Mar 08 09:56:54.24: [ 4347]: <-- data [67]
Mar 08 09:56:54.24: [ 4347]: SENT 66 bytes of data
Mar 08 09:56:54.24: [ 4347]: <-- data [51]
Mar 08 09:56:54.24: [ 4347]: SENT 51 bytes of data
.
.
.
.
.
.
.
.
.
Mar 08 09:57:14.08: [ 4347]: <-- data [60]
Mar 08 09:57:14.08: [ 4347]: SENT 60 bytes of data
Mar 08 09:57:14.08: [ 4347]: SEND 2D RTC
Mar 08 09:57:14.08: [ 4347]: <-- data [30]
Mar 08 09:57:14.08: [ 4347]: <-- data [2]
Mar 08 09:57:14.08: [ 4347]: SEND end page
Mar 08 09:57:20.70: [ 4347]: --> [2:OK]
Mar 08 09:57:20.70: [ 4347]: <-- [9:AT+FTS=7\r]
Mar 08 09:57:20.85: [ 4347]: --> [2:OK]
Mar 08 09:57:20.85: [ 4347]: SEND send MPS (more pages, same document)
Mar 08 09:57:20.85: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:20.87: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:20.87: [ 4347]: <-- data [3]
Mar 08 09:57:20.87: [ 4347]: <-- data [2]
Mar 08 09:57:22.14: [ 4347]: --> [2:OK]
Mar 08 09:57:22.14: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:22.29: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:22.41: [ 4347]: --> [5:ERROR]
Mar 08 09:57:22.41: [ 4347]: MODEM Command error
Mar 08 09:57:22.41: [ 4347]: FCS error
Mar 08 09:57:22.41: [ 4347]: <-- [9:AT+FRS=7\r]
Mar 08 09:57:22.56: [ 4347]: --> [2:OK]
Mar 08 09:57:22.56: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:24.38: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:24.38: [ 4347]: <-- data [3]
Mar 08 09:57:24.38: [ 4347]: <-- data [2]
Mar 08 09:57:25.68: [ 4347]: --> [2:OK]
Mar 08 09:57:25.68: [ 4347]: SEND send CRP (command repeat)
Mar 08 09:57:25.68: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:28.78: [ 4347]: --> [0:]
Mar 08 09:57:28.78: [ 4347]: MODEM <Empty line>
Mar 08 09:57:28.78: [ 4347]: <-- data [1]
Mar 08 09:57:28.98: [ 4347]: MODEM <Timeout>
Mar 08 09:57:28.98: [ 4347]: SEND send MPS (more pages, same document)
Mar 08 09:57:28.98: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:29.30: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:29.30: [ 4347]: <-- data [3]
Mar 08 09:57:29.30: [ 4347]: <-- data [2]
Mar 08 09:57:30.59: [ 4347]: --> [2:OK]
Mar 08 09:57:30.59: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:30.73: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:30.86: [ 4347]: --> [5:ERROR]
Mar 08 09:57:30.86: [ 4347]: MODEM Command error
Mar 08 09:57:30.86: [ 4347]: FCS error
Mar 08 09:57:30.86: [ 4347]: <-- [9:AT+FRS=7\r]
Mar 08 09:57:31.01: [ 4347]: --> [2:OK]
Mar 08 09:57:31.01: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:32.85: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:32.85: [ 4347]: <-- data [3]
Mar 08 09:57:32.85: [ 4347]: <-- data [2]
Mar 08 09:57:34.14: [ 4347]: --> [2:OK]
Mar 08 09:57:34.14: [ 4347]: SEND send CRP (command repeat)
Mar 08 09:57:34.14: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:37.24: [ 4347]: --> [0:]
Mar 08 09:57:37.24: [ 4347]: MODEM <Empty line>
Mar 08 09:57:37.24: [ 4347]: <-- data [1]
Mar 08 09:57:37.44: [ 4347]: MODEM <Timeout>
Mar 08 09:57:37.44: [ 4347]: SEND send MPS (more pages, same document)
Mar 08 09:57:37.44: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:37.76: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:37.76: [ 4347]: <-- data [3]
Mar 08 09:57:37.76: [ 4347]: <-- data [2]
Mar 08 09:57:39.05: [ 4347]: --> [2:OK]
Mar 08 09:57:39.05: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:39.20: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:39.32: [ 4347]: --> [5:ERROR]
Mar 08 09:57:39.32: [ 4347]: MODEM Command error
Mar 08 09:57:39.32: [ 4347]: FCS error
Mar 08 09:57:39.32: [ 4347]: <-- [9:AT+FRS=7\r]
Mar 08 09:57:39.46: [ 4347]: --> [2:OK]
Mar 08 09:57:39.46: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:41.31: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:41.31: [ 4347]: <-- data [3]
Mar 08 09:57:41.31: [ 4347]: <-- data [2]
Mar 08 09:57:42.61: [ 4347]: --> [2:OK]
Mar 08 09:57:42.61: [ 4347]: SEND send CRP (command repeat)
Mar 08 09:57:42.61: [ 4347]: <-- [9:AT+FRH=3\r]
Mar 08 09:57:45.71: [ 4347]: --> [0:]
Mar 08 09:57:45.71: [ 4347]: MODEM <Empty line>
Mar 08 09:57:45.71: [ 4347]: <-- data [1]
Mar 08 09:57:45.91: [ 4347]: MODEM <Timeout>
Mar 08 09:57:45.91: [ 4347]: No response to MPS repeated 3 tries
Mar 08 09:57:45.91: [ 4347]: SEND: No response to MPS repeated 3 tries; Giving up after 3 attempts to send same page "docq/doc598.ps;c1", dirnum 0
Mar 08 09:57:45.91: [ 4347]: <-- [9:AT+FTH=3\r]
Mar 08 09:57:46.23: [ 4347]: --> [7:CONNECT]
Mar 08 09:57:46.23: [ 4347]: <-- data [3]
Mar 08 09:57:46.23: [ 4347]: <-- data [2]
Mar 08 09:57:47.52: [ 4347]: --> [2:OK]
Mar 08 09:57:47.52: [ 4347]: <-- [5:ATH0\r]
Mar 08 09:57:47.64: [ 4347]: --> [2:OK]
Mar 08 09:57:47.64: [ 4347]: SESSION END

Mar 08 09:34:02.30: [ 3919]: SESSION BEGIN 000001456 27114753629
Mar 08 09:34:02.30: [ 3919]: HylaFAX (tm) Version 4.2.3rc1
Mar 08 09:34:02.30: [ 3919]: SEND FAX: JOB 590 DEST 0114753629 COMMID 000001456 DEVICE '/dev/ttySHSF0' FROM '************' USER newlunar
Mar 08 09:34:02.30: [ 3919]: <-- [14:AT+FCLASS=1.0\r]
Mar 08 09:34:02.32: [ 3919]: --> [2:OK]
Mar 08 09:34:02.32: [ 3919]: DIAL 0114753629
Mar 08 09:34:02.32: [ 3919]: <-- [16:ATDT00114753629\r]
Mar 08 09:34:19.32: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:20.47: [ 3919]: --> [2:OK]
Mar 08 09:34:20.47: [ 3919]: REMOTE NSF "00 00 11 80 FF 8A 48 00 5E 00 80 80 80 0A 01 01"
Mar 08 09:34:20.47: [ 3919]: NSF remote fax equipment: Canon
Mar 08 09:34:20.47: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:20.50: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:20.89: [ 3919]: --> [2:OK]
Mar 08 09:34:20.89: [ 3919]: REMOTE best rate 33600 bit/s
Mar 08 09:34:20.89: [ 3919]: REMOTE max A3 page width (303 mm)
Mar 08 09:34:20.89: [ 3919]: REMOTE max unlimited page length
Mar 08 09:34:20.89: [ 3919]: REMOTE best vres R16 x 15.4 line/mm
Mar 08 09:34:20.89: [ 3919]: REMOTE format support: MH, MR, MMR, JBIG
Mar 08 09:34:20.89: [ 3919]: REMOTE supports T.30 Annex A, 256-byte ECM
Mar 08 09:34:20.89: [ 3919]: REMOTE best 0 ms/scanline
Mar 08 09:34:20.89: [ 3919]: USE 14400 bit/s
Mar 08 09:34:20.89: [ 3919]: USE error correction mode
Mar 08 09:34:20.89: [ 3919]: SEND file "docq/doc591.ps;c1"
Mar 08 09:34:20.89: [ 3919]: USE A4 page width (215 mm)
Mar 08 09:34:20.90: [ 3919]: USE unlimited page length
Mar 08 09:34:20.90: [ 3919]: USE 7.7 line/mm
Mar 08 09:34:20.90: [ 3919]: USE 2-D MMR
Mar 08 09:34:20.90: [ 3919]: USE 0 ms/scanline
Mar 08 09:34:20.90: [ 3919]: SEND training at v.17 14400 bit/s
Mar 08 09:34:20.90: [ 3919]: <-- [9:AT+FRS=7\r]
Mar 08 09:34:21.04: [ 3919]: --> [2:OK]
Mar 08 09:34:21.04: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:21.36: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:21.36: [ 3919]: <-- data [23]
Mar 08 09:34:21.36: [ 3919]: <-- data [2]
Mar 08 09:34:22.94: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:22.94: [ 3919]: <-- data [7]
Mar 08 09:34:22.94: [ 3919]: <-- data [2]
Mar 08 09:34:23.45: [ 3919]: --> [2:OK]
Mar 08 09:34:23.45: [ 3919]: <-- [9:AT+FTS=7\r]
Mar 08 09:34:23.60: [ 3919]: --> [2:OK]
Mar 08 09:34:23.60: [ 3919]: <-- [11:AT+FTM=145\r]
Mar 08 09:34:23.62: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:23.62: [ 3919]: <-- data [1024]
Mar 08 09:34:23.62: [ 3919]: <-- data [1024]
Mar 08 09:34:23.62: [ 3919]: <-- data [652]
Mar 08 09:34:23.62: [ 3919]: <-- data [2]
Mar 08 09:34:26.78: [ 3919]: --> [2:OK]
Mar 08 09:34:26.78: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:26.94: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:28.20: [ 3919]: --> [2:OK]
Mar 08 09:34:28.20: [ 3919]: TRAINING succeeded
Mar 08 09:34:28.20: [ 3919]: SEND begin page
Mar 08 09:34:28.21: [ 3919]: SEND EOFB
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 0
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 1
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 2
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 3
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 4
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 5
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 6
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 7
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 8
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 9
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 10
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 11
Mar 08 09:34:28.21: [ 3919]: SEND send frame number 12
Mar 08 09:34:28.21: [ 3919]: DELAY 200 ms
Mar 08 09:34:28.41: [ 3919]: <-- [11:AT+FTM=146\r]
Mar 08 09:34:28.72: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:28.72: [ 3919]: <-- data [1029]
Mar 08 09:34:28.72: [ 3919]: <-- data [1031]
Mar 08 09:34:28.72: [ 3919]: <-- data [1031]
Mar 08 09:34:28.72: [ 3919]: <-- data [872]
Mar 08 09:34:28.73: [ 3919]: <-- data [2]
Mar 08 09:34:31.35: [ 3919]: --> [2:OK]
Mar 08 09:34:31.35: [ 3919]: <-- [9:AT+FTS=7\r]
Mar 08 09:34:31.50: [ 3919]: --> [2:OK]
Mar 08 09:34:31.50: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:31.52: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:31.52: [ 3919]: <-- data [7]
Mar 08 09:34:31.52: [ 3919]: <-- data [2]
Mar 08 09:34:32.90: [ 3919]: --> [2:OK]
Mar 08 09:34:32.90: [ 3919]: SEND send PPS (partial page signal)
Mar 08 09:34:32.90: [ 3919]: SEND send MPS (more pages, same document)
Mar 08 09:34:32.90: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:33.05: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:33.18: [ 3919]: --> [5:ERROR]
Mar 08 09:34:33.18: [ 3919]: MODEM Command error
Mar 08 09:34:33.18: [ 3919]: FCS error
Mar 08 09:34:33.18: [ 3919]: <-- [9:AT+FRS=7\r]
Mar 08 09:34:34.67: [ 3919]: --> [2:OK]
Mar 08 09:34:34.67: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:34.99: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:34.99: [ 3919]: <-- data [3]
Mar 08 09:34:34.99: [ 3919]: <-- data [2]
Mar 08 09:34:36.28: [ 3919]: --> [2:OK]
Mar 08 09:34:36.28: [ 3919]: SEND send CRP (command repeat)
Mar 08 09:34:36.28: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:39.38: [ 3919]: --> [0:]
Mar 08 09:34:39.38: [ 3919]: MODEM <Empty line>
Mar 08 09:34:39.38: [ 3919]: <-- data [1]
Mar 08 09:34:39.59: [ 3919]: MODEM <Timeout>
Mar 08 09:34:39.59: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:39.90: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:39.90: [ 3919]: <-- data [7]
Mar 08 09:34:39.90: [ 3919]: <-- data [2]
Mar 08 09:34:41.33: [ 3919]: --> [2:OK]
Mar 08 09:34:41.33: [ 3919]: SEND send PPS (partial page signal)
Mar 08 09:34:41.33: [ 3919]: SEND send MPS (more pages, same document)
Mar 08 09:34:41.33: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:41.47: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:41.60: [ 3919]: --> [5:ERROR]
Mar 08 09:34:41.60: [ 3919]: MODEM Command error
Mar 08 09:34:41.60: [ 3919]: FCS error
Mar 08 09:34:41.60: [ 3919]: <-- [9:AT+FRS=7\r]
Mar 08 09:34:41.74: [ 3919]: --> [2:OK]
Mar 08 09:34:41.74: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:42.06: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:42.06: [ 3919]: <-- data [3]
Mar 08 09:34:42.06: [ 3919]: <-- data [2]
Mar 08 09:34:43.36: [ 3919]: --> [2:OK]
Mar 08 09:34:43.36: [ 3919]: SEND send CRP (command repeat)
Mar 08 09:34:43.36: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:46.46: [ 3919]: --> [0:]
Mar 08 09:34:46.46: [ 3919]: MODEM <Empty line>
Mar 08 09:34:46.46: [ 3919]: <-- data [1]
Mar 08 09:34:46.66: [ 3919]: MODEM <Timeout>
Mar 08 09:34:46.66: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:46.98: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:46.98: [ 3919]: <-- data [7]
Mar 08 09:34:46.98: [ 3919]: <-- data [2]
Mar 08 09:34:48.38: [ 3919]: --> [2:OK]
Mar 08 09:34:48.38: [ 3919]: SEND send PPS (partial page signal)
Mar 08 09:34:48.38: [ 3919]: SEND send MPS (more pages, same document)
Mar 08 09:34:48.38: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:48.53: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:48.65: [ 3919]: --> [5:ERROR]
Mar 08 09:34:48.65: [ 3919]: MODEM Command error
Mar 08 09:34:48.65: [ 3919]: FCS error
Mar 08 09:34:48.65: [ 3919]: <-- [9:AT+FRS=7\r]
Mar 08 09:34:48.80: [ 3919]: --> [2:OK]
Mar 08 09:34:48.80: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:49.12: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:49.12: [ 3919]: <-- data [3]
Mar 08 09:34:49.12: [ 3919]: <-- data [2]
Mar 08 09:34:50.41: [ 3919]: --> [2:OK]
Mar 08 09:34:50.41: [ 3919]: SEND send CRP (command repeat)
Mar 08 09:34:50.41: [ 3919]: <-- [9:AT+FRH=3\r]
Mar 08 09:34:53.51: [ 3919]: --> [0:]
Mar 08 09:34:53.51: [ 3919]: MODEM <Empty line>
Mar 08 09:34:53.51: [ 3919]: <-- data [1]
Mar 08 09:34:53.71: [ 3919]: MODEM <Timeout>
Mar 08 09:34:53.71: [ 3919]: No response to PPS repeated 3 times.
Mar 08 09:34:53.71: [ 3919]: SEND end page
Mar 08 09:34:53.71: [ 3919]: <-- [9:AT+FTH=3\r]
Mar 08 09:34:54.03: [ 3919]: --> [7:CONNECT]
Mar 08 09:34:54.03: [ 3919]: <-- data [3]
Mar 08 09:34:54.03: [ 3919]: <-- data [2]
Mar 08 09:34:55.32: [ 3919]: --> [2:OK]
Mar 08 09:34:55.32: [ 3919]: <-- [5:ATH0\r]
Mar 08 09:34:55.46: [ 3919]: --> [2:OK]
Mar 08 09:34:55.46: [ 3919]: SESSION END

Mar 08 09:42:22.57: [ 4049]: SESSION BEGIN 000001461 27112731699
Mar 08 09:42:22.57: [ 4049]: HylaFAX (tm) Version 4.2.3rc1
Mar 08 09:42:22.57: [ 4049]: SEND FAX: JOB 591 DEST 0112731699 COMMID 000001461 DEVICE '/dev/ttySHSF1' FROM '<*********>' USER newlunar
Mar 08 09:42:22.57: [ 4049]: <-- [14:AT+FCLASS=1.0\r]
Mar 08 09:42:22.59: [ 4049]: --> [2:OK]
Mar 08 09:42:22.59: [ 4049]: DIAL 0112731699
Mar 08 09:42:22.59: [ 4049]: <-- [16:ATDT00112731699\r]
Mar 08 09:42:37.37: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:38.44: [ 4049]: --> [2:OK]
Mar 08 09:42:38.44: [ 4049]: REMOTE NSF "00 00 25 00 00 00 12 10 5D 02 00 50 00 28 B8 24"
Mar 08 09:42:38.44: [ 4049]: NSF remote fax equipment: Ricoh
Mar 08 09:42:38.44: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:38.47: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:39.18: [ 4049]: --> [2:OK]
Mar 08 09:42:39.18: [ 4049]: REMOTE NSF "00 00 25 01 50 52 4F 44 53 52 45 47 55 52 4B 2D 4E 41 4D 4E 49 4D"
Mar 08 09:42:39.18: [ 4049]: NSF remote fax equipment: Ricoh
Mar 08 09:42:39.18: [ 4049]: NSF remote station ID: "MINMAN-KRUGERSDORP"
Mar 08 09:42:39.18: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:39.20: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:39.88: [ 4049]: --> [2:OK]
Mar 08 09:42:39.88: [ 4049]: REMOTE CSI "0112731699"
Mar 08 09:42:39.88: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:39.90: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:40.23: [ 4049]: --> [2:OK]
Mar 08 09:42:40.23: [ 4049]: REMOTE best rate 14400 bit/s
Mar 08 09:42:40.23: [ 4049]: REMOTE max A4 page width (215 mm)
Mar 08 09:42:40.23: [ 4049]: REMOTE max unlimited page length
Mar 08 09:42:40.23: [ 4049]: REMOTE best vres 7.7 line/mm
Mar 08 09:42:40.23: [ 4049]: REMOTE format support: MH, MR, MMR
Mar 08 09:42:40.23: [ 4049]: REMOTE supports T.30 Annex A, 256-byte ECM
Mar 08 09:42:40.23: [ 4049]: REMOTE best 10 ms/scanline
Mar 08 09:42:40.23: [ 4049]: USE 14400 bit/s
Mar 08 09:42:40.23: [ 4049]: USE error correction mode
Mar 08 09:42:40.23: [ 4049]: SEND file "docq/doc592.ps;c1"
Mar 08 09:42:40.24: [ 4049]: USE A4 page width (215 mm)
Mar 08 09:42:40.24: [ 4049]: USE unlimited page length
Mar 08 09:42:40.24: [ 4049]: USE 7.7 line/mm
Mar 08 09:42:40.24: [ 4049]: USE 2-D MMR
Mar 08 09:42:40.24: [ 4049]: USE 0 ms/scanline
Mar 08 09:42:40.24: [ 4049]: SEND training at v.17 14400 bit/s
Mar 08 09:42:40.24: [ 4049]: <-- [9:AT+FRS=7\r]
Mar 08 09:42:40.39: [ 4049]: --> [2:OK]
Mar 08 09:42:40.39: [ 4049]: <-- [9:AT+FTH=3\r]
Mar 08 09:42:40.70: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:40.70: [ 4049]: <-- data [23]
Mar 08 09:42:40.70: [ 4049]: <-- data [2]
Mar 08 09:42:42.28: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:42.28: [ 4049]: <-- data [7]
Mar 08 09:42:42.28: [ 4049]: <-- data [2]
Mar 08 09:42:42.79: [ 4049]: --> [2:OK]
Mar 08 09:42:42.79: [ 4049]: <-- [9:AT+FTS=7\r]
Mar 08 09:42:42.94: [ 4049]: --> [2:OK]
Mar 08 09:42:42.94: [ 4049]: <-- [11:AT+FTM=145\r]
Mar 08 09:42:42.97: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:42.97: [ 4049]: <-- data [1024]
Mar 08 09:42:42.97: [ 4049]: <-- data [1024]
Mar 08 09:42:42.97: [ 4049]: <-- data [652]
Mar 08 09:42:42.97: [ 4049]: <-- data [2]
Mar 08 09:42:46.12: [ 4049]: --> [2:OK]
Mar 08 09:42:46.12: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:46.65: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:47.86: [ 4049]: --> [2:OK]
Mar 08 09:42:47.86: [ 4049]: TRAINING succeeded
Mar 08 09:42:47.86: [ 4049]: SEND begin page
Mar 08 09:42:47.86: [ 4049]: SEND EOFB
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 0
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 1
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 2
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 3
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 4
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 5
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 6
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 7
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 8
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 9
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 10
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 11
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 12
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 13
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 14
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 15
Mar 08 09:42:47.86: [ 4049]: SEND send frame number 16
Mar 08 09:42:47.86: [ 4049]: DELAY 200 ms
Mar 08 09:42:48.06: [ 4049]: <-- [11:AT+FTM=146\r]
Mar 08 09:42:48.38: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:48.38: [ 4049]: <-- data [1026]
Mar 08 09:42:48.38: [ 4049]: <-- data [1029]
Mar 08 09:42:48.38: [ 4049]: <-- data [1029]
Mar 08 09:42:48.38: [ 4049]: <-- data [1048]
Mar 08 09:42:48.38: [ 4049]: <-- data [930]
Mar 08 09:42:48.38: [ 4049]: <-- data [2]
Mar 08 09:42:51.60: [ 4049]: --> [2:OK]
Mar 08 09:42:51.60: [ 4049]: <-- [9:AT+FTS=7\r]
Mar 08 09:42:51.75: [ 4049]: --> [2:OK]
Mar 08 09:42:51.75: [ 4049]: <-- [9:AT+FTH=3\r]
Mar 08 09:42:51.77: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:51.77: [ 4049]: <-- data [8]
Mar 08 09:42:51.77: [ 4049]: <-- data [2]
Mar 08 09:42:53.15: [ 4049]: --> [2:OK]
Mar 08 09:42:53.15: [ 4049]: SEND send PPS (partial page signal)
Mar 08 09:42:53.15: [ 4049]: SEND send MPS (more pages, same document)
Mar 08 09:42:53.15: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:53.30: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:53.40: [ 4049]: --> [5:ERROR]
Mar 08 09:42:53.40: [ 4049]: MODEM Command error
Mar 08 09:42:53.40: [ 4049]: FCS error
Mar 08 09:42:53.40: [ 4049]: <-- [9:AT+FRS=7\r]
Mar 08 09:42:54.81: [ 4049]: --> [2:OK]
Mar 08 09:42:54.81: [ 4049]: <-- [9:AT+FTH=3\r]
Mar 08 09:42:55.13: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:55.13: [ 4049]: <-- data [3]
Mar 08 09:42:55.13: [ 4049]: <-- data [2]
Mar 08 09:42:56.42: [ 4049]: --> [2:OK]
Mar 08 09:42:56.42: [ 4049]: SEND send CRP (command repeat)
Mar 08 09:42:56.42: [ 4049]: <-- [9:AT+FRH=3\r]
Mar 08 09:42:56.71: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:57.91: [ 4049]: --> [2:OK]
Mar 08 09:42:57.91: [ 4049]: SEND recv DCN (disconnect)
Mar 08 09:42:57.91: [ 4049]: <-- [9:AT+FRS=7\r]
Mar 08 09:42:58.05: [ 4049]: --> [2:OK]
Mar 08 09:42:58.05: [ 4049]: COMREC invalid response received to PPS.
Mar 08 09:42:58.05: [ 4049]: SEND end page
Mar 08 09:42:58.05: [ 4049]: SEND: COMREC invalid response received to PPS.; Giving up after 3 attempts to send same page "docq/doc592.ps;c1", dirnum 0
Mar 08 09:42:58.05: [ 4049]: <-- [9:AT+FTH=3\r]
Mar 08 09:42:58.37: [ 4049]: --> [7:CONNECT]
Mar 08 09:42:58.37: [ 4049]: <-- data [3]
Mar 08 09:42:58.37: [ 4049]: <-- data [2]
Mar 08 09:42:59.67: [ 4049]: --> [2:OK]
Mar 08 09:42:59.67: [ 4049]: <-- [5:ATH0\r]
Mar 08 09:42:59.79: [ 4049]: --> [2:OK]
Mar 08 09:42:59.79: [ 4049]: SESSION END

Follow-Ups:
- Re: [hylafax-users] COMREC Invalid response to PPS with HSF Linuxant modem
  - From: Lee Howard

Prev by Date: Re: [hylafax-users] Unreliable fax services via VoIP connection
Next by Date: Re: [hylafax-users] mangled fax output
Previous by thread: Re: [hylafax-users] Iaxmodem settings wanted (asterisk - hylafax)
Next by thread: Re: [hylafax-users] COMREC Invalid response to PPS with HSF Linuxant modem
Index(es):
- Main
- Thread

Project hosted by iFAX Solutions