[hylafax-users] mangled fax output

[Juraj Bednar <jooray@xxxxxxxxx>]

Hello,

  I am using Hylafax 4.2.1 from Debian Sarge (4.2.1-5sarge3) for sending
faxes (I don't use Hylafax for receiving them). For some fax machines,
it works correctly, but for others, this is the fax I receive:

  http://flz.sk.cx/faxout.jpg

  It looks like some complete lines are missing. The fax is sent using
modem identified as "DP Home VER 5.01 V.92" which is a Microcom
DeskPorte Home faxmodem.

  This is my config.ttyS0:

CountryCode:            421
AreaCode:               2
FAXNumber:              +1.999.555.1212
LongDistancePrefix:     0
InternationalPrefix:    00
DialStringRules:        etc/dialrules
ServerTracing:          1
SessionTracing:         11
RecvFileMode:           0600
LogFileMode:            0600
DeviceMode:             0600
RingsBeforeAnswer:      0
SpeakerVolume:          off
GettyArgs:              "-h %l dx_%s"
LocalIdentifier:        JB
TagLineFont:            etc/lutRS18.pcf
TagLineFormat:          "From %%l|%c|Page %%P of %%T"
MaxRecvPages:           25
ModemType:              Class1
ModemFlowControl:       xonxoff
ModemDialCmd:           ATDT0%s
Class1Cmd:              AT+FCLASS=1
Class1PPMWaitCmd:       AT+FTS=7
Class1TCFWaitCmd:       AT+FTS=7
Class1EOPWaitCmd:       AT+FTS=9
Class1MsgRecvHackCmd:   ""
Class1TCFResponseDelay: 75
Class1SendMsgDelay:     200
Class1SwitchingCmd:     AT+FRS=7
Class1TrainingRecovery: 1500
Class1RecvAbortOK:      200
Class1FrameOverhead:    4
Class1RecvIdentTimer:   40000
Class1TCFMaxNonZero:    10
Class1TCFMinRun:        1000


  Any ideas how to fix this problem are appreciated. I can send
configuration files if required.

____________________ HylaFAX(tm) Users Mailing List _______________________
  To subscribe/unsubscribe, click http://lists.hylafax.org/cgi-bin/lsg2.cgi
 On UNIX: mail -s unsubscribe hylafax-users-request@xxxxxxxxxxx < /dev/null
  *To learn about commercial HylaFAX(tm) support, mail sales@xxxxxxxxx*